Rear seat belt: installation and repair

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Seat belts were first talked about in 1885, when a simple American inventor named Edward Claghorn proudly announced to his loved ones that he had received a patent for his practical “brainchild”. For aircraft, they began to be used 100 years ago. Automobile magnates long and stubbornly did not want to notice this innovation, until in 1948 they began to be used on the Tucker Torpedo. Today, the rear seat belt is a mandatory attribute in every car. Its serviceability is a prerequisite for a safe trip.

A little about pen alties

Driving a vehicle and being in the passenger compartment of a car of passengers who do not use this tool are unacceptable. The driver will have to pay a fine of 500 rubles for unfastened passengers. The absence of rear seat belts will make it impossible to pass inspection. Some drivers and passengers take these details lightly, and ordinary people often cite as proof of their innocenceridiculous arguments. Consider the most common.

Do not get out in an accident

Some motorists mistakenly believe that it is impossible to get out of the car because of the rear seat belt in the event of a traffic accident. Auto experts debunked this myth by doing several crash tests on different brands. This was possible only in older models. In modern systems, automation is convenient - even if it "wedges", you can get out.

Why buckle up at low speeds?

Even at low speed, you can get serious damage. Injuries to the neck and spine often occur with a sharp and unexpected collision with an obstacle. It won't be noticeable to the driver, but a passenger not using the rear seat belt will feel the drama of the situation in full.

A head-on collision even at low speed leads to an increase in the mass of a person's body up to several tons, therefore, breaking the windshield with his head, a person is likely to die. According to statistics, more than 80% of accidents occur precisely at low speeds, regardless of where the accident occurred - outside the city or in urban infrastructure. In connection with this information, each vehicle owner should keep this element in full readiness and good condition. Sometimes it happens that the rear seat belt does not respond to the actions of the passenger.

Causes of problems

It happensthe strap "wedges", and he refuses to be removed from the socket. The reason lies in the malfunction of the blocker. The device consists of a ball that moves through the levers, catching on the gears of the coils. Pretensioners may break. Similar troubles happen after accidents or in frosty weather. In some cases, the seat belt buckle (rear) provokes a problem, then it's the squibs.

How to repair?

Mechanics' advice will help correct the situation. The trim and coils are removed. On some brands of cars, you have to remove the seat. To work, you will need different screwdrivers, keys, oil. Be careful not to stain the seat upholstery. Sometimes complex repairs are required, and sometimes the work goes quickly and without surprises. Certain types of foreign cars require special tools, which are only available in auto repair shops. Do-it-yourself repairs will save money, but if time is valuable or there is no experience, it is better to turn to the masters.

Coil Repair Wisdom

Most often you need to repair the coil. Access to it is provided by removing the side panel lining, which is fixed with clips and bolts. It is important to observe safety requirements: the battery terminal for the negative conductor must be removed. The airbag contacts must also be disabled. This will prevent the squib from firing.

The coil case opens, and it becomes obvious that the mechanism spring has failed. Its replacement will help return the device to workingcondition.

Secrets of good editing

A simple installation of the rear seat belts will help you avoid trouble on the road. The expediency of replacement is justified in the presence of defects on the strap. The procedure on the hatchback is as follows:

• Rear seat cushion needs to be folded forward.
• Remove the rear seat belt bolt and remove the buckle.
• Remove the pad from the screw holding the lap belt fastener.
• The bolt is turned out and the bracket is removed.
• Upper retainer bolt cover, which has a decorative function, must be removed.
• The bolt is unscrewed, the bracket can be removed. Next, you need to remove the rear shelf and unscrew the inertial coil retainer bolt. The belt is pulled through the support of the rear shelf, removed from the car.

The new part is installed in reverse order

It is important not to confuse the bolts! The inertial coil is attached to the shortest bolt. The waist branch is attached with a long screw.

Some people think that it is not dangerous to be behind the driver in an unfastened state. Indeed, according to statistics, this seat is 16% better in terms of safety compared to other seats, but only when the passenger is carefully strapped in. Otherwise, this place is most vulnerable to impact. The passenger's chances of surviving flying through the windshield are minimal.

There are those who believe that it is not necessary to buckle up if you have airbags. Europeans wereonly in the seventies, during the advertising campaign of the first such structural elements, they are sure of this.

Neglecting something as simple and useful as safety tape can be fatal. Is it worth risking your life?