2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Most car owners want to make their pet personal and stylish. One of the elements that novice tuners most often modify is interior lighting. Well-designed lighting can create a real cosiness in the cabin. You are completely free to choose the shade that suits you the most. Interior LED lighting can be bold red or more soothing (blue, green).
Implementation of refinement occurs through the use of LEDs. The interior lighting looks great if you use, for example, an LED strip instead of LEDs. Thanks to this solution, your car in the dark will be of extraordinary interest to others. The original interior lighting will be an excellent decoration for both a domestic car and a prestigious foreign car.
The places for installing additional light sources are quite diverse. Most often, tuners prefer to highlight the legs, as well as the instrument panel. Do-it-yourself interior lighting is done very carefully and painstakingly. For starters, you can replace all standard backlights with colored LEDs. FromFor ethical reasons, the color scheme of the instrument panel, buttons and footwell lights should be the same. But this is not the rule, especially for people who like to be imaginative.
LEDs of various colors, sizes, and brightness can be at your disposal. If you are free to choose the color yourself, then there is excellent advice about the size and brightness. Interior lighting should be organized using the smallest and brightest LEDs. A clear advantage of LED lamps is low power consumption, vibration resistance and rare burnout. There is one "but"! Often, for their installation, it is required to drill small holes in the interior plastic, which is not to everyone's liking.
LED strips are a wonderful alternative. It is best to use moisture-proof tapes that are coated with silicone. Note that such a coating perfectly protects against accidental mechanical damage.
Consider the minimum set of lighting elements that you need to buy in advance. You will need LEDs or LED strip, wire (preferably 3-5 m), power button, electrical tape and a soldering kit. To achieve a more effective result, you can buy a special module that will allow you to adjust the brightness of the glow, control the program if your LEDs have a different color, and you can also buy a remote control for the backlight.
Installation must comply with the followinghighlights. The LED strip must be cut strictly in a certain place, and the ends of the conductor must be soldered to the positive and negative contacts. After that, remove the protective layer from the tape and glue it at the bottom of the front panel. It is best to find a place that will hide the presence of your refinement, but the light will spread unhindered. The last step is to connect the backlight button and lay the wiring under the trim or rugs.
Recommended:
How to polish scratches on a car with your own hands: technology and materials
Scratches on a car body are quite common. You can find them anywhere, unsuccessfully opening the door, parking too close to a bush, not noticing an obstacle, and in a number of other situations. In some cases, you can get rid of them only by resorting to painting in the cabin, in others, you can polish the scratches on the car with your own hands
How to properly soundproof a car with your own hands? Required Materials and Tips
Even in a new car, the enjoyment of driving can be spoiled by constant noise from tires, other cars, wind, etc. A lot of extraneous sounds gradually begin to annoy even people with a very stable nervous system. To save yourself from annoying noise, you need to do a lot of work on installing soundproofing
Installation and connection of the car radio with your own hands
The process of installing a car radio in a car is a job that can be done by hand. At the same time, the installation operation itself is not particularly difficult. An ordinary car owner, at least a little familiar with the basics of electrical engineering, will connect the car radio without any problems. How to correctly connect the radio in the car and what should be the sequence of actions, we will consider further
Replacing the shock absorber struts at the service station and with your own hands
Replacement of shock absorber struts is carried out in pairs: if the right one is out of order, then the left one must also be changed. This applies to both the rear and front axles of the car. If the breakdown occurred due to natural wear and tear, it is recommended to install new supports
How to lighten the flywheel with your own hands: features, benefits and reviews
Today there are many ways to increase the power of a car engine. Fans of speed and drive often decide to lighten the flywheel. Let's see what advantages can be obtained from such a replacement, what features this process has and whether it is possible to do the process of relief with your own hands in the garage
