Do-it-yourself liquid glass polishing: process technology
Do-it-yourself liquid glass polishing: process technology
Anonim

Every motorist strives to ensure that his vehicle always looks well-groomed and clean. To achieve a similar result, modern polishing compositions allow. Not so long ago, only classic products were on the shelves of the store. But today polishing with liquid glass has gained great popularity.

liquid glass polishing
liquid glass polishing

What is this remedy

Polishing with liquid glass is carried out using a special alkaline composition. Such a polish is made on the basis of sodium or potassium silicate. The production of the material is carried out by fusing quartz sand with soda. As a result of such processing, a product of high quality in composition and at the same time a safe product is obtained, designed to polish the vehicle.

What you need

Polishing with liquid glass requires vehicle preparation. However, before starting such work, it is recommended to check the complete set of polishes. The following instruments must be sold with this tool:

  • base composition and hardener;
  • pipette, which can be used to mix components without any problems;
  • special fiber,designed for manual polishing;
  • protective gloves;
  • soft sponge;
  • towel.

If one of the tools is not included, it is recommended to purchase it separately. Otherwise, it will not be possible to carefully polish the body.

car polishing with liquid glass
car polishing with liquid glass

Preparing the vehicle

To successfully polish a car with liquid glass, it is worth preparing the body well. To get started:

  1. Wash the car thoroughly, removing all dirt, dust and insects.
  2. The surface of the body must be well degreased. For these purposes, it is recommended to use white alcohol, previously diluted in clean water. Do not use for degreasing products that contain low-quality alcohols or silicones. After processing, the car must be dried.
  3. If the body was covered with polish before applying liquid glass, it must be completely removed. Otherwise, the new coating will stick very poorly to the surface of the body. And this will significantly reduce its service life.
  4. glass car polish
    glass car polish

Where to polish

Polishing a car with liquid glass should be carried out on a small area. The place must be dry, well ventilated. During operation, the air temperature should be 10-40°C above zero. Experts recommend polishing the body in the garage. If the procedure will be carried out on the street, then the car should be put under a canopy.

When applying a specialcomposition on the surface of the body, it is necessary to exclude dirt, dust and direct sunlight from entering the car.

Things to consider

Polishing a car body with liquid glass is a rather laborious process. If you are new to the business, it is worth considering a few simple rules. First of all, do not apply a special composition immediately to the entire body. You should cover a small piece first. This will allow you to evaluate how liquid glass adheres to the surface of the vehicle. If you get the expected result, you can safely start polishing the entire car.

It is also worth considering that the product should be applied to the body gradually, processing section by section. For example, you can start with a bumper and finish with a roof. When one part of the car is completely processed, you can start polishing the next one. This approach is required for two reasons. So the processing of the body will be performed better. In addition, the polish will not dry as quickly.

liquid glass polishing reviews
liquid glass polishing reviews

How to apply liquid glass

Polishing with liquid glass should begin with the preparation of a special composition. Before you start mixing the components, you should carefully study the instructions and follow everything as indicated in it. Otherwise, the polish will turn out to be of poor quality. When the composition is ready, you can begin to apply it to the surface of the body. In this case, you need to act very carefully.

A small amount of polish should be applied to any part of the body, and then rubbed with a soft cloth, which should be included inset. When performing such work, it is worthwhile to ensure that dust does not get on the surface. When the entire body is completely processed, it is necessary to leave the vehicle alone for six hours. The coating should dry a little.

It is worth noting that the complete solidification of liquid glass occurs 14 days after application. During this period, it is not recommended to wash the car body, especially at a car wash. After the specified time, the surface of the machine will be completely protected from moisture, sunlight, s alt and other troubles.

polishing car body with liquid glass
polishing car body with liquid glass

Is it possible to speed up the process

How long does polishing with liquid glass take? Reviews of car owners indicate that the entire process of processing the body with high-quality work takes about 6 hours. A lot of people can't take that long. so the question arises, is it possible to speed up the polishing process? Many people use additional tools to simplify the work, for example, a grinder. In this case, for polishing, you should choose a polishing soft pad. Liquid glass is applied only at medium speeds. Applying additional force to the grinder when polishing is not recommended. Otherwise, the surface will start to overheat.

If a grinder is not available, then an electric drill equipped with a special nozzle for fixing polishing wheels can be used for work.

How much will it cost

Do-it-yourself polishing with liquid glass costsmuch cheaper than polishing in a car dealership. It is worth noting that the price of a quality product is 3-6 thousand rudders. Of course, the cost of liquid glass is much higher than conventional polishes. However, this coating lasts much longer. The application of liquid glass does not require the use of special tools and special skills. And this, in turn, saves money.

do-it-yourself liquid glass polishing
do-it-yourself liquid glass polishing

Finally

After polishing the body with liquid glass, a smooth and neat coating is formed. The vehicle looks more well-groomed. If necessary, this coating can be updated. It is worth noting that liquid glass is kept on the surface of the body for one year. At the same time, the coating can withstand up to 50 visits to specialized car washes. In addition, all you need to maintain the bodywork is a clean rag and a bottle of water.

Polishing with liquid glass at home is quite real. The most important thing is to stock up on all the necessary tools and patience. After that, you can get to work.

Recommended: