Glass polishing - tips and instructions

Table of contents:

Glass polishing - tips and instructions
Glass polishing - tips and instructions
Anonim

Every driver should watch his car very carefully. You can not ignore the glass of the car, because they show who is driving. If there are no scratches or damage on them, it is immediately clear that a person takes care of his car, pays due attention to it, and he is not indifferent to what to drive. Polishing car windows is a rather complicated process, but without it, no car will look presentable. In addition, the procedure can be performed with your own hands, if the degree of damage is not very high.

glass polishing
glass polishing

Most often, defects can only be partially removed, because the process itself is very labor intensive. Glass polishing involves the use of tools such as polishing and diamond sheets, polishing wheels, as well as abrasive materials (sheets). The recovery technology itself can be different, it directly depends on the place where the defects are located and the type of glass. In some cases, cleaning cannot be done at all.

Polishing car scratches will help to eliminate shallow defects. This method is suitable for you if you need to remove a layer with a thickness not exceeding one micron. In this case, you need to use a paste with a lowgrain level.

Car glass polishing
Car glass polishing

There is another way to help remove deeper damage - photopolymer. It will help if the scratches reach three hundred microns, here manual work is already powerless. Using the above methods, you can remove 80% of scratches from your car windows. Well, if the damage is very deep and exceeds 300 microns, then it is worth letting grinding into the matter. Most often, this process is carried out manually, but if the glass area is large, then you can use an electric polishing machine.

Glass polishing. Main Materials

  • Paste containing boron carbide.
  • Sandpaper (sandpaper).
  • Paste with boron nitride. It is important to choose the right grit of the material in order to remove the desired layer.
Polishing car scratches
Polishing car scratches

Usually glass polishing takes no more than four hours. If it is necessary to remove a thick layer, then the process is divided into several stages. It is important to remember that each subsequent stage must reduce the level of grit. Since there is a high chance of spoiling the glass, the process must be carried out as carefully as possible.

Polishing steps

  • Prepare for glass processing. To do this, wash it thoroughly, in addition, cover the body with a special protective film.
  • Only glass polishing remains. Apply a special chemical to the polishing pad and get started. Remember that each next approach you need to reduce the abrasiveness of the paste. It's important to know,that the last step should be done manually, without the use of electric machines.
  • Rinse the glass surface thoroughly.

Thanks to this technology, you can achieve really good results. If you perform the process correctly, then the old, scratched glass can eventually take on a pleasant appearance. The main thing to remember is that glass is a fragile substance that can be easily broken if the rules are not followed. When using an electronic machine, you need to differentiate your forces evenly so as not to damage the surface.

Recommended: