Polishing paste for car glass. Glass repair

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

As the vehicle is used, small scratches appear on it. Among the reasons for their appearance can be noted getting sand under the wipers, blows from stones that fly off the road, as well as improper cleaning during ice. Glass Polishing Paste is the solution to the problem.

Headlight grinding

Transparency is important not only for aesthetic purposes, but also for the safety of the driver and passengers in the vehicle. Glass repair can be done on your own or seek professional help. In order to understand whether it will be possible to obtain the desired result after polishing, you should use a simple test.

You need to find a scratch, then run your fingernail over it. If it doesn't catch it, then glass polishing paste will do. Deeper through scratches and chips can be filled with a photopolymer, or the surface can be completely changed.

Features of work

During the grinding process, the surface willbecome thinner, which will negatively affect the condition of the glasses. Removal of small lesions is a lengthy process, consisting of several stages. Glass repair involves the following steps:

• cleaning the surface (defects are marked with a market, and the car is covered with a film);
• special composition is applied to the damaged area with a felt polishing pad;
• treat the surface with a grinder or electric drill;
• car wash again.

The body must be washed in order to prevent glass fragments from falling on it.

Polishing products

Currently, various auto chemical products can be found on sale. How to polish glass? There is a division of polishes into several categories:

• protective compounds;
• optical polishes;
• abrasive pastes.

The first group is designed to create a film on the surface of automotive glass. They protect it from scuffs and cracks.

Optical polishes contain microparticles that can fill in scratches. Abrasive pastes are used to remove the top layer from glass.

Polishing agents may contain Teflon or wax. Teflon mixtures protect the glass surface from serious damage, as they are applied not only to the scratch itself, but to the entire surface. Wax products are less expensive,but they protect glass much worse. The choice depends on the budget, as well as the specifics of the damage. Each option has its own advantages and disadvantages, so it is best to take the help of a specialist to make the right choice.

Pasta GOI

This glass polish paste is often used by car owners at home. It has a low cost, allows you to achieve the desired result. The grain size in the paste varies. The largest is the fourth, which allows you to eliminate large scratches. If there are scuffs, matte fragments, a paste with a third grain size will be required. With it, you can restore the transparency of the glass.

GOI paste with grains of the second size is used to level the surface, remove minor damage.

Features of professional pastes

Wax-based or Teflon-based products are suitable for independent use. They have a higher cost than GOI paste. Teflon paste will provide high-quality protection to automotive glass, so professionals recommend using it.

This polishing paste for car glass can be used not only in salons, but also at home. Is it possible to carry out such a procedure with your own hands? Polishing deep scratches should be done by professionals. You can only get rid of minor damage on your own. You will need:

• 3M glass polishing paste;
• sponge and cleaning fluid;
• body cover film;
• scotch.

At the edges, the film is fixed on the body, the car glass is washed, then wiped dry. Scratches are marked with a marker. The polishing agent is spread over the glass with a felt disk, processed with a machine. Then wash the glass again, check for scratches. The film is removed from the body, then the whole car is washed.

Important information

ЗМ 60150 - polishing paste for glass - is the final stage of restoration work to remove minor defects from car windows. There are fundamental differences between grinding and polishing. Polishing is needed to remove minor damage: minor scratches, minor damage. Grinding allows you to deal with more significant defects, accompanied by the removal of an impressive layer from the glass.

As far as grinding, processing is carried out with abrasive materials based on diamond dust. This method is only suitable for those glasses whose thickness is sufficient for such processing. For example, you can do it on the headlights. Grinding is carried out using sandpaper No. 200-800, diamond paste (intermediate and grinding), abrasive compounds.

Interesting details

Polishing is usually used to restore transparency to the windshield, since grinding (rough processing) may deform the parallel surfaces of the triplex. Glass after that will remindlens, which will create vision problems, it will be dangerous to drive such a vehicle.

To prevent the polishing paste from drying out during application, you need to constantly spray it with water from the spray bottle. Professionals advise using diamond paste carefully, since if the technology is violated, the windshield can be damaged. After finishing the treatment, it is necessary to check the presence of dull areas on the polished glass. When they are detected, re-polishing is performed.

Latest glass products

Ceriglass - polishing paste for automotive glass. It easily copes with the following problems: acid stains from washer fluids, stains, minor damage. This tool is produced on the basis of ceramics and cerium oxide, which belongs to rare compounds. Cerium oxide is used to obtain the effect of "optical blush". The unique composition and perfect balance allow you to apply this product with an applicator (manually), as well as with a special polishing tool.

Distinctive features of Ceriglass paste:

• can be used to remove old damage and update the appearance of glass;
• in addition to polishing auto glass, this product is best suited for cleaning chrome-plated metal products;
• the product is suitable for treating other areas of the vehicle: headlights, plexiglass, chrome parts.

Features of using Ceriglass paste

Let's note the mainproduct features:

• a natural fur circle is used to apply the paste;
• plastic parts that are near glass surfaces are covered with masking tape;
• five to six drops of the product on the polishing wheel is enough (the machine should be 800-1000 rpm);
• polishing is carried out on average for 5-10 minutes for each element (to avoid overheating of the glass and cracking, you need to periodically moisten it with cool water);
• after the polishing procedure is completed, clean with clean water (two to five milliliters of product will be required on the windshield).

When applying glass polish paste by hand, you will need special applicators, which are sold in one set.

There are also certain precautions that must be observed for the safe use of polishing paste.

While using this product, the glass must be kept at the right temperature to avoid damaging it.

After finishing the polishing procedure, it is necessary to wash off the remaining paste from the surface. Otherwise, the product will get into the cracks, which will lead to a decrease in the quality of the glasses.

Summarize

Modern polishing pastes are universal products that are suitable not only for removing minor scratches on car windows, but also cope with dirt on chrome parts of a vehicle.funds. Thanks to nanotechnology, versatility, they perfectly polish plastic and glass headlights, suitable for large volumes of work.

Such pastes are used for cleaning and polishing glass surfaces in optics and precision engineering. The products clean watch glasses, their metal bracelets and mechanism cases, cope with cleaning and polishing smooth metal (chrome) surfaces. The paste is ideal for cleaning optics for various purposes.

Carpro Ceri Glass combines ceramic abrasives, cerium oxide, nanotech ingredients. During operation, "Keri Glas" does not contaminate the work surface, so significant efforts are not needed to remove residual paste.

Carpro Ceri Glass removes inorganic and organic deposits (lime and calcium deposits) without harming the surface of automotive glass. Perfect cleanliness provides optimal visibility, which makes the operation of the car safe for the driver and passengers.

In order to increase the efficiency of mechanical polishing, it is necessary to use special equipment (polishing wheel, applicator with felt, suede microfiber).

If you follow all the rules for the use and operation of polishing pastes, you can get rid of not only small scratches, but also large flaws on car glass. The modern auto chemical goods market offers a huge variety of pastes, so for the right choice you need to consult withprofessionals.