2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Technique that can go through the snow, and through the swamp, and through the mud, is necessary for people who live in rather difficult conditions. However, not everyone knows that making a caterpillar all-terrain vehicle with your own hands is not at all difficult. In this case, you can use improvised materials. In addition, such a unit can not only travel on land, but also float on water.
Such devices have quite good characteristics: acceptable fuel consumption (about 45 liters per 100 km), average speed of about 45 km/h. Naturally, such a technique has a fairly large weight (up to half a ton), although it all depends on the materials used. To build a caterpillar all-terrain vehicle with your own hands, you should assemble all the parts necessary for this: engine, control system, cab, chassis. The main box can perform not only a protective function. If you make a sharp nose at the cab, then it will be possible to move on an all-terrain vehicle in high grass, since the bumper will push the thickets apart. At the rear, the unit can be equipped with an air intake with an electric fan. It is desirable to make the body airtight so that water cannot seep into it.
If you want to designdo-it-yourself all-terrain vehicle caterpillar, then you first need to make a platform on which the cabin will be installed. It will house the engine, tracks, control system, fuel tank, exhaust pipe and other mechanisms necessary for the normal operation of the device.
As for the control of this vehicle, it can be the same as that of a tractor - lever. To stop the unit, you can install conventional car brakes, moreover, from a domestic car. Next, we do the following with our own hands: in the middle of the platform we need to install a lever for mechanically tensioning the tracks.
Next, you need to make sure that this transport can drive. To do this, you should buy or make caterpillars. For example, tracks can be made from cast metal yourself, and in order for them to move, you can purchase a conveyor belt. Naturally, the tracks must be put on the guide sprocket and support rollers.
In order to design a caterpillar all-terrain vehicle with your own hands, you also need to purchase wheels from a motorized stroller, although you can take already used elements. In addition, this part of the machine must be protected from dirt. The drive wheel must be equipped with hooks on which rubber boots are put on.
Do-it-yourself all-terrain vehicles on caterpillars are easy to make, but in order to be able to use them, you need to build a running gear. The rear axle reducer must be attached to the engine with the gearbox. Forsemiaxes, it is desirable to install bearings. Shafts go from the gearbox to the side disc brakes.
In principle, these are all the main design features of such a vehicle. At the same time, you can be sure that you will not get stuck in the snow and will not drown in the water.
Recommended:
How to polish scratches on a car with your own hands: technology and materials
Scratches on a car body are quite common. You can find them anywhere, unsuccessfully opening the door, parking too close to a bush, not noticing an obstacle, and in a number of other situations. In some cases, you can get rid of them only by resorting to painting in the cabin, in others, you can polish the scratches on the car with your own hands
Replacing the timing belt on Lanos with your own hands: features of the work
In the article you will learn how the timing belt is replaced on Lanos. The state of this element must be monitored as closely as possible, since literally everything depends on it - both your financial well-being and the operation of the engine. The fact is that a broken belt can lead to the breakdown of several valves, and the cost of repairs is quite high. Some motorists naively believe that Lanos is a cheap car with nothing to break
How to connect xenon with your own hands: instructions. Which xenon is better
A rare car from the assembly line is equipped with lighting that would completely satisfy the owner of the car. Halogen lamps with a power of 50-100 W do not allow you to feel comfortable driving in the dark. If we add here wet asph alt that absorbs light, it becomes clear that the driver has no choice but to connect xenon
How to properly soundproof a car with your own hands? Required Materials and Tips
Even in a new car, the enjoyment of driving can be spoiled by constant noise from tires, other cars, wind, etc. A lot of extraneous sounds gradually begin to annoy even people with a very stable nervous system. To save yourself from annoying noise, you need to do a lot of work on installing soundproofing
How to pump the brakes on the Gazelle with your own hands?
Each owner should monitor the condition of the brake system and troubleshoot in time. Among the frequent problems that drivers face is a soft brake pedal. At the same time, the car slows down slightly, and the pedal itself rests almost on the floor. All this indicates the presence of air in the system. Because of it, the fluid cannot exert the necessary pressure on the working cylinders. How to solve this problem?
