2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Installing this part on a truck is not a tribute to fashion. This is a great opportunity to inexpensively and simply improve aerodynamic characteristics, increase directional stability, and reduce fuel consumption. Especially the benefits of such an installation are noticeable at speeds of more than 50 km / h. Even inexpensive spoilers on the GAZelle ensure the optimization of oncoming air flows, which has a positive effect on the convenience of driving.
Fairings on the GAZelle
Mounting data and other parts is more common among racing and sports car enthusiasts. Most motorists are completely more conservative and consider the spoiler to be nothing more than just a decoration, a kind of decoration, and not a detail that is designed to improve the performance and capabilities of the vehicle. In fact, spoilers for the GAZelle can significantly improve dynamic performance.
Practice shows that on trucks that are involved in cargo transportation,such fairings significantly improve performance.
The demand for these parts has increased significantly in the market. They are bought by truckers, as well as car owners who drive mostly within the city.
Materials, or what fairings are made of
Produce these products mainly from soft fabric materials, mats or fiberglass. Various polyester resins are used as a binder. In order for a product based on polymer plastics to be reliably protected from the effects of precipitation, various special additives are used.
Why does the owner of a GAZelle need a fairing?
Truckers, who mostly drive heavy truck tractors, often install so-called dragfoilers. They significantly reduce the drag force of a huge truck. When the speed of movement is high enough, this device significantly improves aerodynamics. Yes, this is a fact, the owner of a small truck will say. But why put spoilers on the GAZelle? One of the manufacturers of these accessories conducted tests that showed the feasibility of using these parts on small cars.
To pass the test, a GAZelle 3302 truck was selected in normal technical condition. The car was a serious-looking and the same weight van. The total mass of the GAZelle was 2950 kg. Then a fairing was installed on the van and tests began. Needless to say, the result even exceeded expectations. But first things first.
How was it tested?
One of the most important characteristics of a car is the time during which the car can accelerate to 100 km. Until the GAZelle roof spoiler was installed, it took her 59.9 s. But this is understandable, because the very last kilometers before reaching the maximum speed - 105.5 km / h - were given to GAZelle with great difficulty.
With a spoiler, the car, when accelerating to 60 km, covered the distance only 0.7 seconds faster.
But at a speed of 80 km, this time was already 3.4 s. At 100 km / h, the car won back as much as 14.1 s. So we managed to win more than 23% of the time spent on overclocking. Perhaps this fact is enough to still decide and purchase spoilers for the GAZelle. However, this is not all the results.
As a result
Technical measurements were fully confirmed by the personal feelings of the experimenter from driving. So, less often had to switch gears. In overtaking, the car behaves more dynamically. But the fact that the dynamics has increased is not the only advantage. Since the streamlining of the body has improved, fuel consumption has also decreased.
Under the most “greenhouse” conditions, in the most economical gear, at a speed of 60 km / h, the consumption was 11.1 liters for cars without this part, and the car with the fairing reduced appetites - the consumption was 10.3 liters. The difference is small, but at speeds over 90 km/h the figure increases.
How to install a spoiler on the GAZelle?
It is better to put this accessory on the roof. In the process, you will have to use some instructions and adhere to certainconditions.
For example, it is recommended to mount the fairing on the roof reinforcements.
Otherwise, the part will simply rip off when moving at high speed. It is best to place the fairing as close to the edge as possible so as not to get into the zone of rarefaction of air flows.
Before fixing the spoiler on the GAZelle Next, it is advisable to measure the location of the supports in advance. You can't do it alone, you need help. The function that the second person will perform is to hold the fairing in place where it will be mounted in the future. At the same time, using a ruler, you should measure the gap between the supports, and also make markings from the edges to the pores. It is recommended to choose the most optimal location so that the entire structure is parallel to the edges of the car.
Next comes the installation stage, and before that it is desirable to measure everything again. In case of mismatch and errors, everything must be corrected, otherwise the characteristics may be violated, and all the advantages of this product will turn into disadvantages.
Installation work
So, if the spoiler on the GAZelle Next is installed correctly, you can proceed with the installation work. In the positions that are pre-marked in the previous step, drill holes for fasteners. The drill must be held strictly perpendicular to the surface. Spoiler supports are attached with bolts. To increase the mounting area and thereby reduce the load on the head, place wide washers under the nuts.
There is also a mounting method without the need for drillingholes.
Here the spoiler sits on the sealant or glued with double-sided tape. But using the second option, you need to remember that this is not very reliable.
Also, setting the angle of attack will not be superfluous. In order to increase downforce when cornering, the part must have a larger angle of attack, and vice versa. The correct setting can greatly optimize the aerodynamic performance of the machine.
Selection and prices
Today there is a large selection of such accessories.
Many of them are made of quality materials using European technologies. Lots of local producers. If you decide to install a spoiler on a GAZelle, its price starts from 4800 rubles for a complete set with fasteners.
Recommended:
Oil change in Toyota: types and choice of oil, specifications, dosage, do-it-yourself oil change instructions
The reliability of your car depends on quality maintenance. To avoid additional repair costs, it is recommended to use engine oil in a timely and correct manner. The operation of any car implies a number of regulatory requirements. Toyota oil change must be carried out according to the instruction manual. It is recommended to perform the procedure after every 10,000-15,000 km of the vehicle run
Changing the oil in the Chevrolet Niva engine: the choice of oil, the frequency and timing of oil changes, tips from car owners
The car's powertrain needs regular maintenance. The engine is the heart of any car, and its service life depends on how carefully the driver treats it. In this article we will talk about how to change the oil in a Chevrolet Niva engine. Despite the fact that every motorist can do this, there are some nuances that you must first familiarize yourself with
How long does car paint take to dry? The right choice of enamel
One of the types of bodywork is painting car parts. Depending on the conditions in which the painting work takes place, enamel is selected. For a quality repair, you need to consider how much car paint dries, its cost and the durability of the coating it creates
What are the body dimensions of the GAZelle, and what is the best choice for a small business?
The cargo transportation market in Russia is gaining momentum every day. Demand is not only for the services of heavy trucks, but also for light commercial vehicles. GAZelle is currently the absolute leader in this field. Not a single apartment or office move can do without her participation, she promptly delivers any goods to any destination: building materials, electronics and even perishable products
Gazelle generator and its malfunctions. Installation of the generator on the "Gazelle". How to replace the generator with a Gazelle?
The electrical equipment of this car is made according to a single-wire scheme: the negative terminals of the instruments and equipment are connected to the "mass" - the body and other mechanisms of the car, which play the role of a second drive. The on-board network of the Gazelle is equal to the nominal voltage of 12V DC. To turn on the electrical circuit, the ignition switch is used, which consists of a contact drive and an anti-theft lock