2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Fixing a car number is a procedure that car owners consider not a very simple task. It is only required if you purchase a new machine. Therefore, many are not interested in knowing the technical features of the process, which is subsequently fraught with problems with the traffic police. Violation of the rules may result in disciplinary action. The article contains information on how to fix the number on the car.
Clear requirements
Strict regulation is provided for the place where the license plate is attached. This information is specified in the rules of the road. Installation of the state sign is provided immediately after it has been issued.
In order to fix the license plate on the car properly, it is important to ensure that you have the necessary tools in advance. You will need them to securely mount.
When a car is registered, such a tool can be taken from other motorists,whose cars are parked nearby. Or bring with you. The main device for fixing the number will be a screwdriver.
Rules for attaching a license plate to a car
Considering the question of how to fix the number on the car, you should pay attention to the fact that most manufacturers tend to designate a place for the license plate directly at the car factory. If such conditions are not provided, the installation must be carried out, guided by existing requirements. They provide for the presence of a license plate in the front and rear of the vehicle. Be sure the mounting axis must be strictly symmetrical.
If installation with respect to the axis of symmetry is not possible, it is allowed to slightly deviate from the center. In the front and rear, you can step back a little to the left relative to the central axis. It also matters if there are any problems with the visibility of the number plate from different angles. Therefore, it is very important to clearly know how to fix the number on the car.
Important Notes
Installing a license plate requires the following important requirements:
- It is unacceptable to stick out a plate with a number outside the boundaries of the vehicle.
- The number should not interfere with the correct functioning of the lights.
- It must not be covered by other body parts.
Dealer Frame Features
When studying the question of how to secure a state number, it is important to considersome features. All motorists should know them:
- The fastener itself must also meet certain requirements. The material of manufacture of this mount is important.
- Fixing the license plate is made in the case when such a frame does not obscure the inscription or image of the number. After all, quite often a situation arises when the size of the bolts does not correspond to the size of the body holes. And self-drilling of additional holes is strictly prohibited.
- It is forbidden to use transparent and translucent materials for attaching registration numbers.
Legislative requirements
The current legislation clearly states how to fix the number on the car so as not to break the law. An administrative violation will be considered:
- lack of license plates on the vehicle;
- installing a license plate in a place not intended for this;
- installing it using materials that cause difficulty or complete exclusion of its identification.
If the listed violations are recorded, this is punishable by a fine of 5,000 rubles. It also provides for the confiscation of rights for periods of one to three months.
Choosing a mounting location
Many modern vehicles have a place specifically designed to secure the license plate. Then the error is practically eliminated, and it is clear how to fix the numbers on the car.
WhenWithout such a hint, it will be much more difficult to navigate. But do not rush and make mistakes. For the correct performance of such work, it is recommended to study a special GOST on state registration plates for a vehicle, their types and main dimensions, and technical requirements.
Among the main requirements in this document are:
- It is forbidden to install a front or rear license plate with a deviation to the right of the axis.
- Install only on a flat vertical rectangular surface.
- Elements that make up the structure of the vehicle must not obscure the number.
- The choice of mounting location is made so that the license plate is not contaminated and can always be successfully identified.
- The number plate must not reduce the overhang of the vehicle and go beyond its dimensions.
- When installing, it is important not to cover the parts of external lighting and signaling devices.
- To install a license plate on the surface of a bumper of non-standard sizes, it is practiced to perform such actions at an angle. This is prohibited by law and is fraught with appropriate punishment.
Instructions for fixing the number
How to fix the state number on a car? The following instructions list the basic requirements:
- To mount the license plate, it is important to pre-prepare a set of bolts that should not be with a reflective surface. itthe requirement is provided by GOST.
- The screws and bolts must be the same color as the license plate field. They must be light electroplated.
- Instead of bolts, special frames can be purchased. They should not interfere with the review of the inscription RUS, letters, edging, numbers and the image of the Russian flag.
- When attaching a license plate, it is not allowed to use organic glass and other materials, make additional holes in the license plate plate. If necessary, the use of transitional structural elements is practiced.
Fulfillment of the above conditions will allow you to successfully install the license plate in the front and rear of the vehicle.
User Tips
How to fix the number on the car in the frame? Let's turn to the recommendations of users. Before starting work on installing a license plate, experienced motorists recommend placing small washers under the bolts on the front side at the points where the rear sash is attached to the bumper itself. This will ensure the holding strength of the car frames.
Plastic bands can be used for fastening. These fasteners will ensure that the frame is securely fixed in the holes.
This mount can always be found on sale and it is easy to fix the numbers in the frame the way you want. Cutters are used to remove excess fasteners.
How to fix the back number? This can be done in a similar way. Such a mount is quite strong, but outwardly not very aesthetic. Therefore, you canuse the second method.
For the second method, you must first purchase plastic caps for attaching the back door. They are a plastic rod in the form of a Christmas tree with a plastic cap on top. The excess part of the mount will also need to be cut off.
The plug is inserted into the room and tightened with a screwdriver. This mount also has a high level of strength. At the same time, the aesthetic appearance of the license plate does not suffer. Everything is neat, durable and practical. The license plate will not come off at the attachment points.
Features of plastic holder repair
Sometimes during the operation of the car, the plastic holder with which the license plate is fixed can be damaged. Then it is important to fix the problem in a timely manner so as not to lose the plate with the number on the road.
Since when installing the number in the base of the holder, the frame is fixed using latches, you can remove the plate only with a screwdriver, which should have a flat sting. After removing the license plate, you can get to the areas where the bolts and holder are attached. Two self-tapping screws are used to fix the last element.
To remove the plastic holder from the bumper, you need to unscrew the screws with a screwdriver that has a cross-shaped sting. This completes the process of dismantling the number holder. Now you can repair the frame.
To do this, one of the possible methods is used - gluing or reinforcing with metal brackets. The first method is characterized by lessdegree of reliability.
Reinforcing is done with an electric soldering iron. To do this, you need two brackets, the material of which will be copper wire up to 1 mm in diameter. After such a repair, the reliability and durability of the connections are guaranteed.
Summarize
Each vehicle has its own license plate. It is installed immediately after the purchase of the car. Driving without a license plate is subject to a fine.
Therefore, you will have to set the number right at the place of its receipt. For this purpose, it is important to stock up on a screwdriver and fasteners. These can be plastic bands or bolts that match the color of the license plate plate.
Purchasing a dealer frame will greatly facilitate the process of setting the number. This is the easiest way to solve the problem.
Before starting installation, it is advisable to study the requirements of domestic legislation. They clearly spell out how you can not set the number. It is important that the sign is placed strictly in the center. If a deviation is unavoidable, then it can only be to the left.
Drilling additional holes is not permitted. You cannot cover the data indicated on the license plate with fasteners. But it is important to fasten the sign so securely that it cannot be lost during the movement.
The article also included tips for repairing a plastic license plate frame.
Recommended:
Categories of driving license. New driving license categories
More and more people in our country are thinking about getting a driver's license. According to statistics, every year the number of motorists is increasing. Fortunately, today you don’t need much to make this dream come true: only desire and certain knowledge and skills. If you have not yet decided on the category that you want to open, then in this article you will find detailed answers to the questions, what categories of driving licenses exist and what they allow you to manage
Removed license plates from the car: what to do, where to go? Duplicate numbers. Anti-vandal frame for car number
Today we will touch on a topic that concerns the situation when the numbers were removed from the car. What to do in such a situation and who can hold such an event? In fact, either government officials or scammers can rent numbers. Consider the issue in detail and find out the nuances
How to get international driving license? Where can I get international driving license in Moscow and St. Petersburg?
The article contains a description of an international driver's license, the procedure for issuing it in a number of cities in the Russian Federation, a list of documents required to obtain an IDL
Steering rack: backlash and other malfunctions. How to fix or fix?
Steering is an integral part of any car. Thanks to this node, the vehicle can change the direction of the trajectory. The system consists of many elements. The main component is the steering rack. Her backlash is unacceptable. About malfunctions and signs of breakdown of this mechanism - later in our article
The smell of exhaust gases in the car: what to check and how to fix
Each car owner may experience the smell of exhaust gases in the cabin. The main danger of the situation is not in the spoiled air, but in the possibility of developing poisoning. This problem applies not only to old cars, but also to new ones. First of all, you should determine the cause of the smell, and then decide how to eliminate it
