2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
The appearance of a car is in some way the face of its driver. If the car is constantly dirty and unkempt, then, most likely, its owner is not too tidy either. If the car shines, and its appearance is striking, then the owner of the vehicle clearly loves his things and values them. One of the best ways to freshen up and improve the look of your car is to change wheels. But in order to carry out this operation successfully, you need to know what a Niva-Chevrolet bolt pattern with a radius of 15, for example, etc.
What does bolt pattern mean?
It's worth starting with the fact that the disks of the car are attached to such a body part as a hub. There are two mounting options. In the first case, these are spokes, in the second case, these are bolts. Spokes for fixing wheels are used if the total weight of the machine, as well as the total weight of the disks, is not too large. Bolts, on the other hand. It is also important to know that the number of fasteners, i.e. spokes or bolts, can vary. This is very important information that you need to know for bolt pattern."Niva-Chevrolet" or any other car. Therefore, when purchasing parts such as wheels, it is very important to pay attention to how many mounting holes they have.
In order to make it immediately clear how many holes the discs have, they can be marked, for example, 5/112. These figures indicate that the spare part has five holes, and the disk itself has a diameter of 112 mm. Naturally, the marking data will be different for each machine. Therefore, before bolting the Niva-Chevrolet, it is necessary to find out the diameter of the disks, as well as the number of holes for the bolts.
Where to start bolt pattern?
In order to successfully carry out this operation, you must correctly select a suitable replacement for those disks that are already there. It is very easy to solve this problem. You can take one copy of the old disk with you and simply choose a replacement that will fit in terms of bolt pattern, as well as diameter. However, if this is not possible, then you can do otherwise. Using a caliper, you can measure the exact distance between each hole in the disc, and then choose the same in the store. But it is worth noting that this method only works if there are an even number of holes. If there are 3 or 5 of them, then there is another way. In this case, the distance between the edges of those holes in the disk that are adjacent is measured. And then the resulting figure is multiplied by a coefficient, which for 3 holes is 1.155, and for 5 - 1.701.
Niva-Chevrolet bolt pattern
The standard equipment of this car includes wheels with a size of R15, that is, a radius of 15. In order to mount or bolt out this type of disks, there is a 5x139, 7 drilling. However, that's not all. The offset of the Niva-Chevrolet disks can be from 40 to 48 mm. This is important when bolting, because if the overhang is 48 mm, then it is necessary to change the drilling to another with an indicator of 5x139. The change in drilling is due to the fact that these disks will be heavier, and the wheelbase with them will become larger. Direct fastening is carried out by means of spokes, which reduce the pressure of the wheels on the car's suspension. This is very important if you plan to travel off-road.
Nuances of choice
In order to successfully carry out the Niva-Chevrolet bolt pattern, as well as the subsequent replacement of disks, you need to know a few abbreviations that you will definitely meet. For explanation, the marking of the factory parts of the machine will be taken. They have the following indicators: 5J x 16 H2 ET=58, DIA=98, PCD=5 x 139, 7.
- 5J - this means that this wheel will fit a tire no more than 5 inches wide;
- 16 is the wheel rim diameter shown in inches;
- H2 is an indicator of the number of hunts, in this case there are 2 of them;
- ET is an indicator of disk overhang, which is indicated in millimeters;
- DIA is the value that indicates the diameter of the hub in millimeters;
- PCD -indicates the number of holes for mounting, and the next number indicates the diameter of the circumference of the location of these holes.
This is all the necessary knowledge that will be useful in order to successfully carry out the Niva-Chevrolet bolt pattern.
Recommended:
Changing the oil in a Mercedes. Types of oil, why it needs to be changed and the main task of engine oil
A car is a modern vehicle that needs to be monitored every day. A Mercedes car is no exception. Such a machine should always be in order. Changing the oil in a Mercedes is an important procedure for a vehicle. In this article we will talk about how important it is to carry out this procedure, what types and types of oil are
Why is the Check Engine light on? Why does the check engine light come on?
In the age of modern technology, the technical characteristics of a car provide for the presence of a large number of electronics. Cars are literally stuffed with it. Some motorists do not even understand why it is needed or why this or that light is on. In our article we will talk about a small red light bulb called Check Engine. What is it and why does the "Check" light up, let's take a closer look
Why does the car twitch while driving? Reasons why the car twitches at idle, when shifting gears, when braking and at low speeds
If the car twitches while driving, it is not only inconvenient to operate it, but also dangerous! How to determine the cause of such a change and avoid an accident? After reading the material, you will begin to understand your "four-wheeled friend" better
Why is gasoline becoming more expensive? Why is petrol becoming more expensive in Ukraine?
A joke is common among the people: if oil rises in price, then gasoline prices rise, if oil becomes cheaper, then the cost of fuel rises. What is really behind the rising price of gasoline?
Carburetor and injector: difference, similarities, advantages and disadvantages of carburetor and injection engines, principle of operation and expert reviews
For more than a hundred years, the car has firmly established itself in our lives. During this time, managed to become a familiar, everyday means of transportation. Let's see what the difference is between a carburetor and an injector, what advantages and disadvantages they have
