The VAZ-2110 door does not open from the inside. Quick Repair Method

Table of contents:

The VAZ-2110 door does not open from the inside. Quick Repair Method
The VAZ-2110 door does not open from the inside. Quick Repair Method
Anonim

If the door does not open from the inside on the VAZ-2110, then do not rush to go to the service and seek help from specialists. This problem can be easily solved by yourself using slotted and Phillips screwdrivers in a few minutes. In order to carry out repairs, you do not even need to have special skills. It is only necessary to unscrew the screws and disassemble the door trim.

Why doesn't the door open from the inside on the VAZ-2110? Troubleshooting

A breakage is manifested first by a single idling of the handle, but over time such situations are repeated, and as a result, it will stop opening at all. In this case, the door opens from the outside without any problems. In general, it is not difficult to find the cause of the malfunction. The fact that the front door does not open from the inside on the VAZ-2110 may be due to a breakdown of the traction tip, which is made of plastic. And over time, it tends to dry out and become brittle.

Beforeto begin repairs, you must first familiarize yourself with the door opener. It is very simple in this model: from the inner handle there is a pull to the lock mechanism, which opens the door. This failure can occur on any side of the machine. But it is the driver's door that does not open from the inside on the VAZ-2110 just because it is used more often.

What do you need?

Before starting repairs, you must purchase several plastic tie rod ends at an auto parts store at once - for a spare. This spare part is available in almost all specialized shops. It happens that the door on the VAZ-2110 does not open from the inside, not only from the driver's side, but also from the passenger side. Therefore, spare traction will not be superfluous. In addition, they are sold in pairs. You also need to purchase special plastic rivets for attaching the skin. They are inexpensive and always come in handy.

cladding fastening rivet
cladding fastening rivet

Dismantling the door

So, everything is ready to start troubleshooting:

  1. Open the door from the outside and unscrew the screws securing the cladding around the perimeter.
  2. Pry off the trim on the door handle with a flat screwdriver. Under it are 2 mounting screws, which we also unscrew. If there is a speaker in the door, unscrew it and take it out.
  3. When everything is unscrewed, carefully remove the casing, pulling it towards you along the perimeter. Under the skin, we will see the base of the door handle, which is also fastened with screws. Unscrew them.
Handle set
Handle set

Now you can, so to speak,see with your own eyes why the door did not open from the inside on the VAZ-2110. We replace the old worn plastic tip with a new one. At the end of the rod there is a thread on which it is wound. Therefore, we simply twist it and wind a new one. We check how everything works by opening and closing the door several times. Then it remains just to put it in the pen and assemble the whole structure.

Door without a card
Door without a card

Reverse assembly

Assembly is done in the reverse order, but with one caveat. The skin around the perimeter is fastened with plastic rivets, which are very fragile and often break when they are removed. Before installation, you must replace all of them with new ones. Otherwise, a loose fit will cause the trim to rattle while riding.

Replacement only requires a flathead screwdriver. It is necessary to pull the dowel out of the door hole and insert the rivet into the skin. Old kits are not recommended to be left, they are disposable. When the door lining is ready for installation, first gently press it against the door, trying to align all the rivets with the dowels. Next, with a light pressure around the perimeter, we press it tightly. Everything, you can tighten the screws and put the speaker in place.

Now you know what to do if the door does not open from the inside on the VAZ-2110. The repair budget will be about 200-300 rubles, time costs will be no more than half an hour. Efforts to eliminate this problem will also require a minimum. The work is completely easy. This procedure is suitable if any front door does not open on the VAZ-2110 from the inside. The steps are the same in all cases.require additional description.

Recommended: