Pirelli Cinturato P6 tires: reviews, features and description

Table of contents:

Pirelli Cinturato P6 tires: reviews, features and description
Pirelli Cinturato P6 tires: reviews, features and description
Anonim

Road safety is largely determined by the quality of the tires installed. Now the choice of automobile rubber is huge. A number of brands have confidently conquered their market segment and are not going to give up their positions. Other companies have just begun their journey to the top. The Italian concern Pirelli also belongs to the first category. The lineup is impressive. The brand offers tires for cars, trucks and high-speed vehicles. Especially for mid-range sedans, the company released Pirelli Cinturato P6 tires. Feedback from drivers about this rubber is only positive.

Seasonality

Tires designed exclusively for summer use. The compound is hard. At lower temperatures, the rubber compound hardens even more. This negatively affects the quality of adhesion to the road surface. Safe driving becomes impossible.

Use area

Sedan on a summer road
Sedan on a summer road

These tires were designed exclusively for sedans, which are used primarily in urban areas. Rubber is produced in more than 30sizes with landing diameters from 14 to 18 inches. There are few high speed options. For example, Pirelli Cinturato P6 82H tires retain their performance at speeds up to 210 km/h. With more acceleration, according to reviews, it becomes more difficult to keep the road, the car blows to the sides, and the risk of losing control increases. The maximum speed index is V. There are no tires in this series with higher performance.

Tread pattern

Tires Pirelli Cinturato P6
Tires Pirelli Cinturato P6

Pirelli engineers were among the first to use digital simulation techniques in tire development. The tread design of the Pirelli Cinturato P6 tires was developed using modern computational algorithms. Then the model was tested at the company's test site.

The presented tires received a classic symmetrical tread pattern with five stiffeners. This design is characterized by the greatest stability of the contact patch, which has a positive effect on the quality of grip on the road surface.

The central edge is solid. It is made from a harder rubber compound. This improves control reliability at high speeds. The car holds the road better, there is no deviation from the given trajectory. The car responds more sensitively and quickly to steering commands, it is easier to maneuver. In reviews of the Pirelli Cinturato P6, drivers note the reliability of tires during acceleration. The probability of demolition is minimal.

The other two central ribs were given a more complex pattern. Their part, located closer to the center,solid. On the other hand, the elements are cut into small blocks of complex geometric shapes. This approach improves the quality of overclocking. The increased number of cutting edges improves traction.

In reviews of the Pirelli Cinturato P6, drivers also note the stability of braking. This is fully reflected in the tests of independent automotive publications. Among competitors from the same segment, the presented model showed the minimum braking distance. Even a sudden stop does not lead to uncontrolled skidding of the vehicle. Shoulder blocks are rigid. They keep their shape stable even under increased dynamic loads.

Fight against hydroplaning

The biggest problem for a motorist in summer is driving on wet roads. A microfilm of water forms between the roadway and the surface of the tire, which prevents their reliable contact with each other. As a result, the driver loses control, the car does not respond to steering commands, and traffic safety decreases. To combat this effect, engineers have applied a number of specific measures.

hydroplaning effect
hydroplaning effect

Firstly, the protector was equipped with a developed drainage system. It consists of several longitudinal and many transverse tubules. When driving, centrifugal force arises, which draws water deep into the tread. After that, it is redistributed over the entire surface of the tire and retracted to the sides.

Secondly, the proportion of silicic acid was increased in the compound. This connection increases the reliability of the clutch, prevents the car from slipping. Bonus - increased wear resistance of tires.

The structure of silicic acid
The structure of silicic acid

The combination of the presented measures led to such a high reliability of the Pirelli Cinturato P6 tires. This is fully reflected in the reviews of drivers. Motorists note the stability of the car's behavior in the rain. Wet grip only decreases at top speeds.

Features

The brand also noted some of the characteristic features of this rubber. They are printed on the surface of the tire itself.

Energy efficient. Tires received reduced rolling resistance. As a result, the rubber shows high fuel efficiency. Fuel consumption is reduced by 5%. The driver saves money, and carbon dioxide emissions into the atmosphere are reduced. Motorists reflected this in the reviews of the Pirelli Cinturato P6.

Clean air. In the production of the compound, the concern's chemists do not use aromatic oils. As a result, in the process of recycling tires, the total amount of harmful emissions into the environment is reduced.

Recommended: