2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
There are more and more car owners who have already installed or are going to install daytime running lights on their car. Drivers like them so much due to their main feature - very strong brightness. The headlights glow so that they can be seen better during the day than the dipped beam is on.
What advantage do daytime running lights have:
- Low power consumption. In conjunction with the rear dimensions, the headlights consume 130 watts, and the LED strip - 14 watts. The result is there. The lower the energy consumption, the lower the fuel consumption. So there is a benefit to everything.
- The service life of navigation light elements also far exceeds the life of light bulbs, which need a large number with frequent use.
- After all, ordinary lamps are inferior to running lights in their beauty.
The only downside is the rather high price. Not everyone can afford such decoration. The cost of some individual elements is from 3 to 5 thousand, and the entire set costs from 9 to 11 thousand rubles. Plus more installation work. Despite the cost, the market provides a very wide range to choose from, which means that daytime running lights are useddemand.
What is very important to pay attention to when purchasing:
- Select the block shape. To do this, consider the shape of the bumper, the construction and design of the entire car.
- The blocks are also different in size. Decide on the place on the car where you will install the lights, then the dimensions will become more clear.
- Take into account the total power of the LEDs in the entire unit.
Daytime running lights - installation
Installation of navigation lights can cause some difficulties and even seem like a whole problem. As a rule, a place for this is chosen next to the headlights or in the voids on the bumper. These installations often require cuts and holes to be drilled. But not only do you need to fix the daytime running lights flush with the bumper so that they do not protrude, you also need to properly wire and connect them in such a way that they light up when the engine is turned on, and go out when the low beam is turned on. All work performed must comply with the requirements of GOST.
How to do the installation work yourself
Technologies for installation differ depending on the kit that needs to be installed on the car. Each one comes with installation instructions. In it, the manufacturer clearly indicates the connection diagram of the lights for their correct operation. In addition, each kit comes with a set of necessary parts forinstallation work.
Here are some of the GOST requirements:
- Navigation lights are strictly prohibited on trailers.
- The scheme by which the lights are mounted on the car must comply with the instructions prescribed by the manufacturer.
- Auto turn lights on and off when engine starts.
- Installation of diode lights on a vehicle is allowed only from the front side and only in the direction of light forward.
With certain technical regulations, install LED daytime running lights in your car and use them on the road!
Recommended:
Fog lights: features and benefits
Advantages of LED fog lights, features and rules for their installation on a car. The difference between fog lights and conventional LED daytime running lights
Scheme for connecting DRL from a generator or through a relay. How to connect daytime running lights with your own hands?
Installing DRLs in a car takes a lot of time. To do everything right, it is important to familiarize yourself with the standard wiring diagrams
How to make a daytime running light with your own hands?
Currently, every car owner strives to make his "iron horse" as comfortable as possible. However, at the same time, do not forget about safety. Daytime running lights (DRL) will help make your car more visible on the roadway, which, in turn, contributes to a significant reduction in the likelihood of accidents
Running lights - car safety
Riding with headlights on in the daytime was decided a long time ago. It is believed that having headlights on will contribute to the safety of the car on the roads, although some studies have shown that headlights lit during the day do not significantly affect the statistics of traffic accidents
DIY daytime running light
More and more car owners are seeking to install DRL systems on their cars. You can do this in several ways: mount a running light with your own hands or save on your own strength and contact a car service. Nevertheless, one should be rather scrupulous and carefully approach the choice of a master who will perform the necessary work. However, this article will consider the case when it is necessary to install a running light with your own hands