2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Modern cars are subject to constant improvement. Their technical characteristics are also influenced by discoveries in microelectronics, solid state physics, and even in psychology and human physiology, far from the automotive industry.
So, for example, side-view mirrors have recently been applied to
anti-dazzle coating, and they themselves are equipped with a heating system and automatic adjustment of their position. The introduction of rear-view video systems into production is expected.
All this greatly increases the safety and comfort when using the car.
Heated mirrors. His purpose
The purpose of the heat supply is probably clear to all car owners. Removal of moisture, leaving the reflective surface clean and dry in rain or fog, under snow during a blizzard - all this ensures that the mirrors are heated.
This system will also be able to melt the ice crust on the mirror, frozen and covered with ice in the parking lot. All this is very important for the inhabitants of central Russia, most of Ukraine and Belarus, where weather conditions are conducive tofrost and dampness.
Based on the foregoing, we can conclude that mirror heating is a means of ensuring traffic safety. For good visibility reduces the time it takes to accurately review and make decisions in a difficult traffic situation.
Remember how you had to lower the side windows to wipe the mirror while driving. This created not only inconvenience, but also a danger to life. And what were the "gymnastic" exercises to clean the mirrors from ice on a frosty morning!
Heated mirrors universal saves us from problems with poor visibility. It is enough to press a button, and while the car is warming up, frost and ice will come off the mirror. This will happen due to the electric current from the onboard system, which will heat the mirror up to 50°C. The frost will melt under the influence of heat, and the moisture will immediately evaporate.
How to make heated mirrors yourself
But such auto-heating of mirrors appeared in everyday life relatively recently, so many owners of cars of earlier releases were left without a comfortable innovation. It's not a problem. You can also do the mirror heating yourself.
You will need a 12 volt light bulb, the kind you put in taillights
domestic car brands. Its heat will be enough to keep the view clear.
In the disassembled mirror, you need to insulate a plastic casing with a heat-resistant material. It can be cardboard, and textolite, and paronite. Then we arrange the light bulb inside, but so that it does not touch the glass, otherwise it will leadto cracks and deterioration of the reflective layer. At the bottom of the casing we make a hole for the wiring and bring it to the salon through the door. If it is not possible to install a bulb holder, then the wires can be soldered to the contacts in the base. Don't forget isolation!
You will find your advanced mirror thaws in just 3 minutes. True, it is not recommended to keep the light bulb constantly on, due to the fact that plastic parts may begin to melt. But in this case, a double-filament lamp (21 and 5 W) will help you out. Here you can use one thread to melt the ice, and the other to maintain the necessary heat.
Have a safe journey!
Recommended:
Priora car, power window not working: problem solved
Modern cars are endowed with a number of devices and devices to ensure the comfort of the driver and passengers in the cabin. Among the many devices that provide comfort, one can also include an electric window regulator. Often these devices create inconvenience with their unstable operation or failure. This problem, in particular, is quite common on Lada Priora cars
Gasoline pump does not pump gasoline. Possible causes, ways to solve the problem
The article shows the possible reasons why the fuel pump does not pump fuel. Methods for troubleshooting the fuel pump of carburetor and injection engines are also described
Outside rearview mirror for Audi
Exterior rear-view mirrors greatly facilitate the maneuvering of the car owner. They make any trip more comfortable and safer. Therefore, the breakdown of the side mirror causes significant inconvenience. Replacing it yourself is not the most difficult task. In the article we will tell you how to choose, replace and adjust the exterior rear-view mirrors
How to disassemble the rearview mirror and put it back together?
The rear-view mirror is simple in design, and as a rule, it is only necessary to disassemble it if the mechanical element is damaged. For example, if it is cracked or the repeater is burned out. If the case also looks "tired", then the product is usually replaced as an assembly with a non-original one. But sometimes there are no affordable analogues, and the original costs a lot of money. In this case, you need to do your own repairs. Let's talk about how to disassemble the rearview mirror
"Opel Astra" does not start, the starter does not turn. Causes of the malfunction and troubleshooting
The fashionable, stylish car of the German car industry fell in love with consumers. Problems happen with any technique, and you just have to be ready for it. One of the problems often discussed on the Opel Astra forums is that it does not start, the starter does not turn