Outside rearview mirror for Audi
Outside rearview mirror for Audi
Anonim

The desire of a motorist is safety on any route, whether it be comfortable road conditions of a metropolis or bumpy off-road trails. Each element in the car was not invented by chance, everything is aimed at ensuring this factor. Car mirrors also belong to the elements that contribute to safety, characterized by simplicity of design and small dimensions. Installing an outside rear-view mirror is a must for the automotive industry.

Installation feasibility criteria

Rearview mirror
Rearview mirror

When thinking through the project, the developers took into account the factor of ensuring comfort and safety for the driver. The task of the exterior rear-view mirror is to create the most comfortable environment in the car with a high-quality view. The device is designed to prevent emergency and incidental situations when parking and on highways. A simple device makes it safe to overtake, avoid obstacles. Mirrors can be divided into 2 types: options for the interior and for the side of the car. Let's take a closer look at the second type.

Tricks of adjusting the outside rearview mirror

Experts give the following educational program on adjustment:

  1. Need to adjust the driver's seat comfortably.
  2. Slightly tilt the body to the left side by adjusting the left outside rearview mirror with a clear view of the car's rear wing. In the normal position, sitting behind the wheel, it is not visible.
  3. Further you need to deviate to the right side to the center of the cabin: the right exterior mirror should also reflect the wing.

You can check whether the actions were performed correctly by asking the passenger to go around the car around. It should disappear from view for a fraction of a second. In this case, we can safely say that the device is adjusted correctly, and the "dead zones" are at least.

Everything comes to an end sooner or later, and one day you have to change any details.

Reason to replace the mirror

Audi mirror
Audi mirror

Car enthusiasts often turn to services with a request to change this part of the vehicle for several reasons:

  • Water got inside the outside rearview mirror and the glass became cloudy.
  • Chipped, cracked as a result of an accident.
  • An incomprehensible yellowness appeared, making it difficult to look back.

It is difficult for a beginner to carry out independent work, and for the first time it is recommended not to neglect the help of the masters. In the future, it is not forbidden to carry out the procedure with your own hands.

Short educational program on replacement

Tricksoutside mirror settings
Tricksoutside mirror settings

Motorists should be aware that the outside rearview mirror must move freely towards the hood and bumper. Some use a couple of drops of oil to move the fixture freely. The need is connected with the production of the base of car mirrors from light alloys and it is necessary to prevent their oxidation. Why is it needed at all? A passer-by or a passer-by can touch this part, and it will move away, remain intact.

Many owners are wondering how to remove the outside rearview mirror on the Audi A4 B5. The difficulty lies in the presence of a thermal structure inside the device, you will have to act carefully to avoid damaging the wiring.

The algorithm is simple

how to remove outside rear view mirror
how to remove outside rear view mirror

Sequence of actions with variations is suitable for other car brands:

  1. From the driver's door, set the mirror to the highest position.
  2. With a screwdriver, slightly pick the glass itself from above.
  3. Now you should set the mirror control button on the driver's door to the lowest position. We pick again and finally remove the mirror element. The body stays in place.

Then carefully remove the terminals. Now it's the turn of the glass heating. To do this, the "ears" are bent and the element is removed. The new glass is inserted in reverse order.

A couple of tips from experts

When adjusting the mirrors, do not touch the glass coating with your fingers, this will distort the image. External detailsconvex and the main point when adjusting is that the view from behind and from the side should be well lit. Blind spots still cannot be avoided, no matter how you twist the design. These models cannot be trusted 100%.

When is it important to look in the mirror? This should be done before the start or when the opportunity arises to rebuild. It is a reliable assistant when cornering and when reversing, braking, before approaching dangerous areas.

You can connect the thermocouple without observing the polarity on the wires. It is able to function simultaneously with the heated rear window. Motorists sometimes do not even know that thermocouples were installed in the side mirrors at the factory. Careful reading of the instructions will help not to get into an incidental situation.

When installing heating into the review system on your own, you should carefully study the issue, follow the safety rules. Buying a ready-made kit is a bit more expensive than doing it yourself. Lakotkan, textolite can be used as body insulation.

If you want to heat the mirror element, the best solution is to resort to the help of professionals.

Recommended: