How to turn off the airbag: ways

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Every year, automakers are trying to make cars more and more safe. New active and passive safety systems are being introduced. One of the classic systems is pillows. Now they are available on every car for the driver and passengers. Pillows help soften the impact in a collision, provided that the person is wearing a seat belt. However, sometimes it becomes necessary to disable this system. Why is this done and how to disable the front airbag? Consider in our today's article.

What is it for?

There are several reasons why motorists perform this operation. Usually, owners think about how to turn off the passenger airbag when transporting children in a car. If the child will ride in the front seat with a restraint, the cushionmay cause injury in the event of an accident.

In addition, the pillow is turned off for medical reasons. So, this is done when transporting pregnant women and the elderly. Another reason is diseases of the joints and bones. A pillow after a shot can significantly harm a person in this case.

How to turn off the passenger airbag? Next, consider how to do this on different car brands.

Honda

Among the features of this car, it should be noted that a special button is provided here to turn off the pillow. It is located on the side of the front panel, on the passenger side. You can find out if the airbag is currently disabled or not by the indicator light. It is located near the radio or next to the navigation system. How to turn off the airbag on a Honda step by step:

• The car must be set to the handbrake.
• Turn off the ignition and remove the key from the lock.
• Open the front right door and find the airbag switch off. A key is installed in it and rotated counterclockwise.

After that, the pillow will be disabled. How to enable it? To do this, reverse the above steps.

Audi

Let's consider how to turn off the airbag using the example of the Audi Q3. On this car, this operation is an order of magnitude easier than on a Honda. There is a special switch for this. Just turn the knobposition and the airbag will turn off. The switch itself is located at the top of the glove compartment. And the indicator is on the deflector. If the front passenger airbag is disabled, the corresponding inscription will be lit.

But it is worth noting that on many German cars this switch is an option. Therefore, the button can not always be found on a particular model. However, you can turn off the pillow and forcibly. But more on that later.

How to disable the airbag "Kia Rio"?

As in the previous case, this feature is only available for a fee. In cars where it is, it is very easy to turn off the airbag. How to turn off the airbag on the "Kia"? To do this, just open the front passenger door and find the switch. The lever is turned in the right direction and thus the pillow is turned off.

Hyundai Solaris

Unfortunately, this car does not have an airbag deactivation function, even at an additional cost. Therefore, if you plan to transport children in a restraint seat, it is best to use the rear row of seats for this.

If there is an urgent need to turn off the pillow, this can be done by contacting the service center. But to turn it off, specialists will have to disassemble the glove box and part of the front panel. That is, the pillow is removed physically. At the same time, the corresponding indicator will light on the instrument panel.

To turn it off, you need to reprogram the system. Shutdown operationpillows on the Solaris are extremely complex. Therefore, many do not resort to such measures unless absolutely necessary.

Ford Focus

How to turn off the airbag on this car? A switch is not installed on this vehicle from the factory. However, the manufacturer has provided a special cutout. Under the plug you can find all the necessary wires. Thus, to turn off the pillow, you do not need to disassemble half of the panel, as on the Solaris. It is enough to buy a switch and install it in place of the plug. And it is mounted in the glove compartment. In addition to the switch, you should buy an indicator from the seller. It can be silver or grey.

The switch is set in several steps:

• The glove box is being dismantled.
• The plug is removed from the glove compartment. The wires for the switch are already routed here. However, they need to be unwound, as they are tied to a common wiring.
• Connect the cords to the switch. The latter is mounted in place of the plug.

You can switch modes with the key. However, for the system to work, you need to additionally reflash it. After the firmware, the indicator on the instrument panel will not work, indicating a malfunction of the pillow. The system will already think that the airbag was disabled intentionally, and will not disturb the driver.

Physical removal

This is the most radical, but effective way. Unfortunately, the pillow in modern cars is located inside the instrument panel and cannot be dismantled from the outside. To remove it, you have to disassemble the front panel. In some cases, it is enough to disassemble the glove box. Consider the process of removing the pillow using the example of a Nissan Qashqai car.

First you need to de-energize the car by disconnecting the positive battery terminal. After that, you need to dismantle the glove box. Next, remove the lower section of the passenger side panel. Then we will have access to the priorpatron chip. It needs to be disconnected. After that, two fasteners on the sides of the module are unscrewed. The body rises slightly and then moves towards the hood. It is necessary to tilt the front part and release the latches from the grooves. Further, the airbag module can be taken out by pulling it towards you.

Easier way to disable

There is another way to disable the pillow. It involves the removal of the fuse responsible for the operation of the squib. To do this, open the fuse box cover and look at the diagram. If we talk about the Hyundai Solaris car, then here the chip is in the cabin block under the sixth number. This is a 10A fuse. In addition, you need to remove the adjacent fuse. It is under the fifth number and is responsible for the airbag warning light. Then you can close the lid back.

By the same principle, you can turn off the pillows on other cars. The brand doesn't matter. The difference will be only in the location and number of fuses. But it is worth noting that whenThis method disables absolutely all airbags in the car. Therefore, this method cannot be called good.

Conclusion

So we've looked at how to disable the airbag. In most cases, drivers use a switch for this. However, few people remove the pillow completely. Indeed, in addition to parsing the panel, you will have to turn to specialists to drown out the corresponding lamp on the instrument panel. Such measures are not needed, especially if a one-time transportation of a child or a pregnant woman is planned in front. It's much easier to put them in the back seat than it is to physically remove the cushions.