Excavator EO-5126: brief description, parameters
Excavator EO-5126: brief description, parameters
Anonim

Russian Uralvagonzavod is one of the most powerful manufacturers of specialized equipment in the country. And one of the units of the enterprise, which has proven itself excellently in practice and fully corresponds to its price, is the EO-5126 excavator, the characteristics of which will be discussed in detail in this article.

Russian excavator EO-5126
Russian excavator EO-5126

General information

The manufacturer of the machine guarantees full compliance of the equipment produced by him with all standards and norms. The EO-5126 excavator was no exception in this matter, the high quality of which is confirmed both by many years of operation and by the presence of special quality certificates. The warranty period for the unit is one and a half years from the date of its dispatch from the enterprise.

Very well-thought-out design of the machine provides fairly easy access for operating and maintenance personnel to all its components and parts, which makes it an excellent opportunity to repair equipment even in the field.

Destination

The EO-5126 excavator was designed to process pre-loosened rock, the size of the pieceswhich do not exceed 500 mm, as well as frozen soils of categories I–IV. In addition, the machine is actively used for digging trenches, pits, quarries, canals and other similar objects.

Good qualities

The unequivocal advantages of the machine include the following aspects:

  1. Highest throughput and performance.
  2. Having the most powerful power plant.
  3. The presence of special compartments for the first aid kit, personal belongings of the driver.
  4. Easy and easy to operate and maintain.
  5. High comfort of the operator's workplace, which also has the required degree of security.
  6. Multifunctionality, that is, the ability to use the unit in various industries and sectors of the national economy.
  7. Ergonomic arrangement of instruments on the operator panel.
  8. Good stability during operation.
  9. EO-5126 in operation
    EO-5126 in operation

Options

Technical characteristics of the EO-5126 excavator allow it to be produced in two versions.

  1. "Standard". This version is used for the use of the machine in cold climatic zones within the temperature range from -40 to +40 °С.
  2. "Tropical" variant is adapted to work in the corresponding climate. This model of the machine makes it possible to work on it in the heat even above +50 °C.

In general, the EO-5126 excavator is the most popular tracked unit in Russia.

Parameters

The brainchild of the Ural machine builders in terms of its linearsize is by no means small. The dimensions of the equipment are as follows:

  1. Length - 10850 mm.
  2. Height - 5280 mm.
  3. Width -3170 mm.

Among other indicators of the excavator are:

  1. Base dimensions - 3600 mm.
  2. Dead weight - 32000 kg.
  3. Track - 2570 mm.
  4. Digging radius - 19600 mm.
  5. Duration of the working cycle - 17 seconds.
  6. Created pressure on the underlying surface -68 kPa.
  7. Fuel tank capacity - 400 liters.
  8. Specific fuel consumption is 220 g/kWh.

Motor

The EO-5126 excavator, the technical characteristics of which were indicated above, is equipped with an eight-cylinder four-stroke V-shaped diesel engine YaMZ-238GM2, which has water cooling and direct fuel injection.

Motor indicators are:

  1. Volume - 14.86 liters.
  2. Power - 180 hp s.
  3. Diameter of the working cylinder - 130 mm.
  4. Rotational speed - 1700 rpm.

In addition, the machine is equipped with a centralized lubrication system from the German company LINCOLN, as well as a preheater from the Eberspächer company.

Engine EO-5126
Engine EO-5126

General design description

Excavator EO-5126 is, in fact, a combination of three main parts:

  • caterpillar trucks;
  • turntable with hoods and other mechanisms;
  • equipment that performs direct work with the soil.

Hydraulicthe equipment is installed on a turntable. The excavator also includes caterpillar drives, support and track rollers, tensioners and caterpillar tracks. The swing frame is fixed to the main frame with bolts.

A few words about the cockpit

EO-5126 has a driver's workplace equipped according to all ergonomic requirements, which can significantly reduce the time for moving it inside. The heat and sound insulation of the cab is also at a high level, and the large glass area gives the operator an excellent view of the job site. There are two wipers available. There is a heater inside to keep you comfortable.

EO-5126 in stock
EO-5126 in stock

Equipment

Depending on the nature of the work performed, the excavator can be equipped with the following working body:

  • grab;
  • bucket;
  • hydraulic hammer;
  • hydraulic shears;
  • ripper.

Cost

The price of an excavator varies depending on the year of its release and, of course, the technical condition. So, the model of 2008-2010 will cost within 1.2 - 1.6 million Russian rubles. Earlier options will cost 800-900 thousand rubles.

As for analogues, the EO-5126 excavator does not have so many of them. To some extent, the ET-30 model can be attributed to such a technique, which nevertheless has a slightly reduced functionality in comparison with the EO-5126.

Recommended: