2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Every driver who cares about his vehicle periodically polishes the car. The whole procedure takes a little time - about 40 minutes. In order for polishing, in addition to its attractive appearance, to also have protective properties, a Teflon and wax base is required, which is part of it.
These fundamentals differ only in terms of duration. Teflon polish lasts up to 6 car washes, while wax polish lasts less. Protective polishing of the car body will last longer if you wash the car less often, but we also do not recommend neglecting cleanliness.
Protective polishing of the car body can be applied by the owner about once every four months. With this procedure, for convenience, you can even use a conventional electric drill with special polishing nozzles.
If cracks appear on the car, then abrasive polishing of the car body is necessary. Such a process is more complicated, since it masks the scratches of the car body, as well as chips and other defects. Accordingly, it takes more time. Also, the polishing technology itself is a bitdifferent.
Actually, abrasive polishing is carried out only when
Defects on the surface of the body are visible to the naked eye: cracks, chips, scratches and so on. The technology of applying this agent begins with the preparation of the car's paintwork - it is necessary to get rid of the top oxide layer on the body, as well as even out scratches and abrasions.
Depending on the size of the scratches, you need to pick up sandpaper and use it to process all the bumps on the car. This is how car body scratches are polished. Then an abrasive paste is applied to the cleaned surface and rubbed in the usual way. It will be better and more efficient to close the scratches not all at once, but by selecting certain areas for polishing.
Nanopolishing is a protective polishing of the car body, which differs from the standard one only in that it contains materials of different quality. And how to do it yourself?
First of all, it is worth noting that the process itself will not be difficult. But polishing requires patience and compliance with all established rules for work, which include the use of all the necessary tools for this.
So, first you need to thoroughly rinse the body. Next, remove any deposits on the coating: dried spots, drops, etc. This is done simply: with the help of special technical means, such as white spirit. In this case, the most important thing is notoverdo it with solvents so as not to spoil the body coating itself. The weather on the day of this work should not be cold, but not sunny, and it is also better that there is no high humidity. The best place for the procedure would be the garage, in which everything is fairly well lit. In order to apply polish to the body, there are special soft applicators. Remember that if you painted your car a month or two ago, then protective polishing of the car body can interfere with the natural reaction - polymerization of the paintwork.
In the end, check how well you applied the polish. Spray the car with water. Drops should flow off the machine as if sliding off it. That's the whole simple process of polishing, now you can take care of your car yourself. Good luck!
Recommended:
Car body polishing: methods, tools and recommendations
During operation, the car's paintwork deteriorates. There are quite a few reasons for this - both external factors (rain, snow, frost and dirt) and mechanical damage (scratches, chips, abrasions). It is completely impossible to avoid the deterioration of the varnish and paint. But you can polish the body, which will help make the color like a new car
Installing a body kit on a car. Installing an aerodynamic body kit
Installing a body kit on a car can be decorative or perform certain functions. The installation of aerodynamic body kits helps to create artificial downforce, thereby facilitating driving and increasing its dynamic performance
What does car body polishing do?
Polishing a car body is a way not only to make your iron friend shine, but also to eliminate various microcracks that have appeared on the surface of his body during long-term operation. Also, using this process, you can protect the car from the unwanted penetration of small particles of road dust into the bumper and other parts of the lining, which form these cracks and scratches
Anti-gravel film on a car: reviews of motorists. How to stick a protective film on a car
While driving on the roads, the body of the car is exposed to various foreign objects, which now and then fly out from under the wheels of your own or the car that is moving in front. There is a huge risk of damage to the body when driving on country roads or suburban highways. A lot of damage is received by cars that have a fairly low landing and a massive front bumper. There are many ways to protect the body from such damage. One of them is an anti-gravel film for a car
Abrasive body polishing
Abrasive polishing of the body is a very necessary and useful process that many motorists resort to when they need to make their vehicle look good