Installing a body kit on a car. Installing an aerodynamic body kit

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

At the moment, most body kits that are on cars are often impractical and inefficient. From such things, aerodynamics cannot be better, and sometimes even worse. High-quality body kit installation can please when contacting a professional with extensive experience in this matter. But you can also try to do it yourself. You will only need to read a little literature on how the body kit is installed on a car. And, of course, a little practice.

The most favorable way to embellish your car is to install a body kit, which is one of the types of tuning. Installing a body kit on domestically produced cars gives them an individual style, which also improves aerodynamic performance.

Among the types of body kit most often chosen and used are front and rear bumpers, side sills, spoilers, hoods, grilles and so on.

Expediency of installing a body kit

If the body kit was needed for the beauty of the car, then it is easier and easiest not to remove the bumper. But in casedesire to improve the movement of the vehicle at speed, it is worth trying. In this option, you will have to remove some parts, cut holes in the body.

At the moment, certain types of body kits are prohibited by law. These are the elements that go far from the body. Therefore, you should first find out if it would be illegal to install a body kit of your choice.

When the kit is selected, it is advisable to arrange a fitting with the master. Perhaps this look will not suit your body. It is also worth discussing all the questions that arise, the work and its duration, and, of course, the cost. At the end of the fitting, it will be possible to conclude whether it is worth installing such elements, or it will cost too much and is not advisable.

It is worth remembering that the same body kit can have a positive effect on one car, but worsen the movement of a car with a different body.

Steps of body kit installation

First you need to remove the factory elements that will be replaced. The body kit can be installed on the machine using strong glue (sealant) or self-tapping screws. You can use both options at the same time. So, on the sides, both thresholds and skirts are fastened with self-tapping screws, and their middle part is attached to the sealant.

In order to avoid small gaps, you can use a rubber gasket.

It is worth adding that you need to follow a certain installation scheme:

• Firstit is necessary to remove the old parts that are planned to be replaced (if necessary). Some types of body kit are installed on top of factory parts.
• Try on the kit, make sure it fits.
• Fit the parts to the car, set the gaps.
• Fix securely.
• Only after that you can start painting.

The paint will last better and longer if the piece is matted first. Do not rush to drive the car out of the chamber, it is better to let the paint settle.

During operation, safety precautions must be observed. Gloves, overalls and a respirator are used.

Aerodynamic kit for a car

This type of body kit is designed to improve the quality of the car on the road at high speed. As a rule, it starts its work at a speed of at least 120-150 kilometers per hour.

At high speed, the so-called "turbulent zone" remains behind the car - chaotic air flows. These air masses act on the car from all sides, including from below. Because of this, the downforce acting on the body is reduced. This leads to a deterioration in the grip of the car's wheels with the roadway.

Installation of aerodynamic body kits helps to create artificial downforce, thereby facilitating driving and increasing its dynamic performance.

Types of aerodynamic body kits

Spoiler (front and rear), anti-wing, side skirts can act as aerodynamic body kits.

The aerodynamic kit of the front bumper is needed to press the front of the car. The front spoiler is usually installed under the front bumper. This splits the airflow and directs it above and below the vehicle. In some cases, the flow is directed to the radiator for the purpose of additional cooling. A wing is installed on the rear bumper, which presses the rear of the car. This improves handling.

Side body kit installation (thresholds, in particular) is carried out so that there are no turbulences on the sides of the car when driving at high speed.

Power kit

Installing a power body kit is typical for SUVs. In most cases, this is just part of the tuning, giving the car a more aggressive look. Initially, the power kit was designed for driving in difficult places.

Such elements are the best solution when any of the winches is installed on the car. Power body kit protects the front of the car, thereby taking all the impact.

Material for making body kit

Body kits are made from various types of materials, each of which has its own important and specific functions. Manufacturers offer body kits made of carbon fiber, fiberglass, reinforced plastic. If the client wants, they can order and make a unique body kit for him, from the material closest to the realization of the customer's dream.

Installation of plastic body kits is smallcost, resistance to mechanical damage, flexibility.

The body kit made of ABS plastic is of excellent quality, which is impact resistant and lightweight.

Choosing a body kit installer

When looking for a professional, you should pay attention to the price of the work he offers. If the cost is underestimated compared to other auto repair shops, do not flatter yourself. The installation price tag can really increase, and you will only get a check with a large amount in your hands. And it is not yet a fact that the work will be done perfectly.

The ideal option is to look at the finished works, find out their cost. You can talk with visitors to this service and find out their opinion about the work done.

In conclusion, I would like to say that the installation of a body kit on a car depends on such factors as the quality of the material from which it is installed and the condition of the car (not rotten, not rusty, not broken body). Everything else depends on the master who will install this body kit. Naturally, you should not save on your own car. If you decide on alterations, then it is better to give the money once than to turn to inexperienced mediocre workers, and then redo everything.