Do-it-yourself snow chains. Fast and inexpensive

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Handmade snow chains are becoming increasingly popular. To figure out how to make them yourself, you first need to find out what it is. So, snow chains are a tread that turns an ordinary wheel into high-flotation rubber. Such inventions are mainly made of reinforced wire, which is tied in such a way as to evenly braid the wheel around the entire circumference.

This design consists of two cables - internal and external. They run parallel to each other around the circumference and are interconnected by rubber "lugs".

Why do we need do-it-yourself snow chains? This invention perfectly increases the cross-country ability of the car, increases the grip properties of the wheels both on ice and inmud. For example, if you are going fishing, at first you drive along a normal road, and then you leave for a difficult section. If before that your car was moving normally, now you can get stuck in the mud for a long time. To prevent this from happening, it is recommended to wear snow chains on the wheels. Now you can drive on calmly and not worry about getting stuck. Places, such as steep icy climbs, are also difficult to master without special equipment.

Chains on the wheels are divided into 2 categories: soft and hard. For the former, rubber “lugs” play the role of crossbars, and for the latter, link elements. There are also two types of patterns: “honeycomb” or “ladder”. For the former, the longitudinal cables are connected diagonally, resulting in an interlaced pattern. In the second case, they are connected by straight transverse lines, which resembles a rope ladder. They also vary in size and material. So, titanium, steel, aluminum, etc. can be used. Some chains are supplied with special metal spikes.

Which is better to make do-it-yourself snow chains? No one will give you a definite answer to this question. First of all, you should pay attention to the conditions where you plan to use them.

"Hard" better than "soft" cope with mud and loose snow. But during their operation it is not recommended to pick up speed above 40 km / h, as transmission elements may be damaged.car. Rubber snow chains are much less damaging to rubber, and with them you can reach speeds of up to 80 km/h. The same can be said about the size: the larger the links, the higher the cross-country ability and the greater the weight. It is quite difficult to drive on a straight road, the load on the transmission increases, the wear of the rubber accelerates.

If you have already decided what you need, you can safely start making your own snow chain. To do this, you will need to purchase a regular chain, preferably from reinforced wire. Make the structure according to the conditions in which it will be used. Don't forget to make it a little longer than the circumference of your wheel, then you can remove the excess.

Anti-skid chains for SUVs have honeycomb weave. It allows you to perfectly overcome all obstacles, copes well with wetlands and mud.