2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Almost any athermal film can create protection. It will remain invisible to the eye. It will perfectly cover the interior of the car from sunlight and overheating. Especially in this need cars, the interior of which is covered with leather. After all, under the influence of the sun, such material dries up and begins to crack, the rigidity of the coating increases. Plastic parts also become less elastic, coarsen. Textile sheathing fades, brightness and saturation of colors are lost. Athermal film will help protect the interior of the car from ultraviolet rays and retain the original appearance of the materials for a long time. Protects trim details.
The glass of the car treated with a protective film will not allow the car to overheat, so the owner will feel quite comfortable. This will reduce the load on the air conditioner, reduce the owner's financial costs (reduced fuel consumption).
Recently, athermal film LLumar (American production) is often used. It has light transmission up to 80%. The latest technology and high-quality material are used for its manufacture.
The film is produced using ultravioletabsorbers, this will protect passengers and the interior of the car (it blocks about 99% of the sun's rays). It has several layers of coating, one of them has increased heat-reflecting qualities. All layers are connected by a special adhesive compound.
Athermal film incorporates a dielectric coating, it does not interfere with the signal of radio waves and mobile communications. This allows you to freely use the Internet and mobile phone.
HPR, CDF and PS adhesive systems are used in the manufacture, they provide the necessary adhesion of the product.
This type of protection has two series. ATR - has a neutral charcoal tint, this can significantly reduce eye strain. LA - a series with a bluish tint. This is worse for human vision, because when the color deviates from the neutral color, the view is distorted, the eyes get tired much faster.
When tinting a perfectly flat surface, ATR film has less ripple than LA series. This is clearly visible when viewed from an angle of 15-45 degrees.
In the event of an accident, tinting will protect passengers and the driver from broken glass fragments. When hit, they will remain on the film, which will not allow injuring a person.
Athermal film has many colors and shades. Therefore, color tinting of the desired parts of the car is possible. You can choose any color scheme. With this film, your car will turn into a unique vehicle.
It should not be forgotten that the light transmission of glass shouldbe at least 70%. Films fully meet all requirements. However, it should be borne in mind that the glass itself does not have a throughput of 100%. Even a new factory one lets in about 90% of the light.
So, in order to fulfill the technical installation rules, you should choose a film with a light transmission of at least 80%. Now you can get to work. Just do not forget to follow all the above rules.
Recommended:
Tinted headlights with a film. Is it worth paying more?
Tinted headlights with head light film and tinted rear stops with film have now gained wide popularity. This type of tuning creates a single stylish and mysterious image of your car (especially if you own a dark or black car). In addition to black, there are frequent cases of tinted headlights in the color of the car body
Carbon film, its structure and application
The article will tell about the qualities of the carbon film, its application. You will learn about the positive and negative characteristics of this material, as well as what this product can replace
Why do we need athermal tinting
Is it possible to tint car windows so as not to violate GOST and not run into fines? Can. For this, athermal tinting is used
Athermal tinting: reviews, advantages and disadvantages
To ensure good all-round visibility, a modern car has rather large windows around the entire perimeter of the cabin. Through them, of course, everything is very clearly visible. But just as easily, sunlight gets inside. Often it not only shines, but also warms
Anti-gravel film on a car: reviews of motorists. How to stick a protective film on a car
While driving on the roads, the body of the car is exposed to various foreign objects, which now and then fly out from under the wheels of your own or the car that is moving in front. There is a huge risk of damage to the body when driving on country roads or suburban highways. A lot of damage is received by cars that have a fairly low landing and a massive front bumper. There are many ways to protect the body from such damage. One of them is an anti-gravel film for a car
