2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
TCS is called Traction Control System. It uses one or more sensors to determine if the drive wheels are slipping and then reduces engine power to restore traction. This system is often found in sports cars with high power engines.
Working principle
ABS is used to control braking and is focused on stopping the vehicle, while the purpose of TCS is to keep the vehicle's wheels from slipping when acceleration occurs.
The system works very well in low traction situations (such as rain and snow), providing productive throttle application by intervening when there is too much power. The result is a balance of throttle and traction on varying road surfaces.
Productivity
The system is so good that it has been quite right for some time nowwas banned in Formula 1, where racing now requires skill from the driver in order to modulate the throttle and reach the highest possible speed.
Except for those who deliberately try to overcome traction, most enthusiastic drivers tend to avoid wheel drive if at all possible. In fact, the TCS traction control system will make the movement slower, increasing the lap time and, in general, taking enough concentration to mitigate its effects, whether it be lowering or excessive wheel agility or torque.
Loss of traction can also be dangerous, plus let's not ignore the frustration and potential difficulty of screwing on the throttle just to keep the car from stalling at some very inopportune moment.
These days, more and more new cars come straight from the factory equipped with Traction Control Systems (TCS) - TCS Traction Control. These installations are basically of a universal type. They fit all vehicles and are not model specific.
Traction control
Recently, Honda ECU Extraordinaire Hondata has joined a group of elite companies offering TCS with their own anti-skid product.
Hontata's fully programmable Traction Control module extracts information from the vehicle's wheel speed sensors and tells the ECU to reduce power (mainly by pulling time from the engine) when itdetects the difference in speed between the driven and non-steered wheels.
It also analyzes wheel speed differences from non-steered wheels to improve cornering grip. The user remains at an advantage with on-the-fly sliding speed adjustment via a switch that can be set within the owner's reach on the vehicle's dashboard or center console.
Relevance of the system
Currently the unit described here is compatible with Hondata S300, most K-Pro and chooses Honda/Acura supported FlashPro engine management and uses sensors that are a key component of the anti-lock braking system (ABS) already installed on many cars.
Specialists say that the traction control unit can be adapted to work with any engine management system using a five-volt auxiliary input.
The slip protection system works with inductive, active and hall effect sensors and can offer five levels of target wheel slip, adjustable with a switch.
The TCS traction control comes in a box with cables, software and a harness for power, ground, engine control and positive and negative leads for each of the four wheel speed sensors.
Features of use
After installing thisHardware The next step is to set up the software. The default settings offer evenly spaced wheel slip percentages front to back (for straight pull) and left to right (for turning) for each of the five switch positions.
Via USB cable and Windows-based operating system, five default Traction Control module control settings can be configured using the Traction Control System traction control software.
Slip target percentage can be adjusted on the fly for both straight and curved roads.
System shutdown
How to disable the TCS traction control? According to car owners, this is not difficult. It is enough to remove one of the fuses that takes part in the process of TCS operation.
The on-board computer will signal that a malfunction has occurred, but the car will be able to cope and help the vehicle get out of a difficult situation.
But this practice should not be turned into a pattern. It is important to remember about the safety that the slip protection system provides. If it is disabled, the car may get into an emergency on the road.
Summarize
About the anti-slip protection system installed in Honda cars, reviews from motorists are positive. TCS takes care of safety on the road when wheels can slip on poor road surfaces. Therefore, recently it has been bannedenjoy on professional races.
But some extreme people try to feel the drive and seek to disable the TCS slip system. To do this, just turn off the fuse. It is important to bear in mind that in this state it is not necessary to leave the car for a long time. After all, the traction control system was created specifically with care for the safety of movement in a Honda car.
Also keep in mind that no matter how smart a vehicle's electronics are, seasonal tires and a good brake system play a major role in braking and skid control. Therefore, even with active TCS, it is necessary to ensure the serviceability of the listed elements.
Despite the diligent and conscientious work of electronic assistants, the driver must be careful and monitor the condition of the car.
Recommended:
The principle of operation of the traction control system
Today, in the world of cars, there are many electronic systems and assistants that work to increase active and passive safety. Thus, electronics can prevent accidents that occur when the car is moving. Now all vehicles are required to be equipped with a system such as ABS. But it's far from the only system on the base list. So, models of a class above are regularly equipped with ASR
Start-stop system: what it is, what it is intended for, the principle of operation and reviews
Almost a third of the time the engine is idling. That is, the engine works, burns fuel, pollutes the environment, but the car does not move. The introduction of the "Start-Stop" system ensures the operation of the engine only while driving
ABS system. Anti-blocking system: purpose, device, principle of operation. Bleeding brakes with ABS
Not always an inexperienced driver manages to cope with the car and quickly reduce the speed. You can prevent skidding and blocking of the wheels by intermittently applying the brake. There is also an ABS system, which is designed to prevent dangerous situations while driving. It improves the quality of grip with the roadway and maintains the controllability of the car, regardless of the type of surface
The principle of operation of the variator. Variator: device and principle of operation
The beginning of the creation of variable programs was laid in the last century. Even then, a Dutch engineer mounted it on a vehicle. After such mechanisms were used on industrial machines
"Lada-Kalina": ignition switch. Device, principle of operation, installation rules, ignition system, advantages, disadvantages and features of operation
Detailed story about the ignition switch Lada Kalina. General information and some technical characteristics are given. The device of the lock and the most frequent malfunctions are considered. The procedure for replacing with your own hands is described
