Magical transformation - features of tuning "Focus 3"

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Compliance with the rules, deep knowledge of the technical nuances of the machine will help the master avoid mistakes. The main goal for which the car owner turns to the Focus 3 tuning center is to improve the dynamic component. The understandable desire of any car owner is to save money on the purchase of gasoline. To satisfy it, one has to resort to modernization.

Motor and its improvement

Add "horses" to the legendary American helps chip tuning "Focus 3", performed on the basis of a professional service station. Fortunately, too much investment is not required for this. The first step is preparing the firmware of the block, and you will also need a proven free file archiver 7 zip.

In addition, a K-Line data transfer device, a laptop on the Windows XP platform, accompanied by the necessary driver content, and the CombiLoader loader are useful. This arsenal will allow you to perform tuning "Focus 3" without resorting to the services of car specialists.

Ohmachine preparation

It is important to change the engine oil before starting work, flush the throttle, change filters. Then you can proceed to the main work. You need to find the ECU. Whether it's a sedan or a hatchback, it's easy to spot under the steering wheel. It is necessary to remove the plastic cover by slightly pulling the unit towards you. The main thing is not to damage the wires.

The algorithm of actions is as follows:

1. Having connected the adapter with one end to the OBD connector, the other end to the electronic device, you need to start the car.
2. After waiting just a minute, you will need to find the folder with the information of the electronic control unit.
3. Next up to the Combiloader.
4. Standard firmware should be "Open to the specified folder" with the right mouse button.
5. Select the zip extension and click on the phrase "Copy with replacement".
6. Setting is made according to priority indicators for the driver. After a 10-minute wait for the completion of the procedure, click on OK.
7. Then the engine is turned off, followed by disconnecting the cords and mounting the ECU in its original position.

As a result, after chip tuning "Focus 3" a significant increase in power is noted: approximately 40 "horses" and a quarter to the torque. A positive result can be attributed to a rare jamming of the power unit in 1-2 gears, plus an early start on a frosty day will be provided. For a hundred kilometers, the car will consume 1.5 liters less fuel.

Creating an original interior

Forthe implementation of high-quality tuning "Ford Focus 3" is not at all necessary to invest money, devoting all the time to processing the cab. Turning to the flocking technique is a cost-effective option, during which there is a high probability of getting a beautiful and cozy salon. How is it done on the station wagon?

You can't do without a tuning kit. To change the style of the interior, you will need a flock attached with a special glue. Equipment and accessories are purchased at any auto studio. Parts to be flocked must be removed, degreased and cleaned.

The case uses a metal sheet to connect to the "+" of the flocator. In its container, a flock is diluted simultaneously with the dye. Then you can start applying. The pro-blocked elements are left for 24 hours in a warm place, then everything is returned to its place. The material is easy to use, but greasy stains are best removed immediately. After the fat is absorbed, it is much more difficult to clean the damaged area. Household chemicals are not recommended.

Effective headlight correction tips

Angel eyes for aesthetic charm and LEDs for practical lighting are the most sought-after ways to improve optics. Headlights do a better job with their main "mission". What you can’t do without is 2 meters of LED strip with a voltage of 15 V. You don’t need to buy additional stabilizers. The main indicator here is the diameter of the marker light. The tape should repeat its shape and fit in size.

1. Cut off the tape27 lamps according to the white mark on the tape.
2. The cut piece rolls into a circle. The wire will help synchronize its ends. Complete disassembly of the headlight is superfluous. On the contrary, it will spoil the tightness. It is better to pull out the size from the back and insert the diodes into the hole.
3. We wrap the tape around the headlight. You will have to drill a hole in the basement.

Hatchback Tuning Recommendations

To perform competent operations so that the tuning "Focus 3" (hatchback) makes a stunning impression, auto experts advise mounting non-standard body kits on the body. This will give luxury, European notes of design art. The kits include bumpers, sills, sport-type spoilers. "Rebooting" such a plan will improve driving power.

Features of changes in the sedan

The tuning "Focus 3" includes the installation of a spoiler on the rear bumper. After the intervention of the master of the tuning studio, the "swallow" will become obedient. This makes the "steel horse" stylish, fashionable, protects tires from premature abrasion.

Corrections of such a plan, subject to proper installation, lead to a decrease in fuel consumption and decoration of vehicles in an unusual way.