2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:41
The dimensions of the UAZ "Farmer" body and its general characteristics make it possible to classify this car as a small-tonnage commercial vehicle, focused on the transportation of various cargoes. The machine has good operational parameters and good driving performance, suitable for agriculture, capable of transporting 1.15 tons of cargo and up to seven people. The truck is equipped with a platform with sides and a cab in two rows. Four-wheel drive contributes to confident movement on difficult soils and off-road. Consider its features and technical parameters.
Description
All modifications, regardless of the size of the UAZ "Farmer" body, are made on a frame-type chassis with two versions of the wheelbase. Cars are equipped with a synchronized gearbox for four or five modes, as well as a two-speed gearbox of the transfer unit. In the standard version, the drive axles are identical to those of the 452 series. On specimens manufactured after 2015, Spicer-type blocks are mounted, equipped with a locking differential clutch forrear wheel drive.
The truck is equipped with a four-cylinder engine and a fuel injection system. The engine is liquid-cooled and produces 112 horsepower. The operation of the power unit with an injector greatly simplified the engine start, while the car began to consume 20-25% less fuel. Gasoline consumption depends on the type of engine, ranges from 15-17 l / 100 km.
Features
The volume of the fuel tank is not affected by the body size of the UAZ "Farmer", the tank capacity is 50 liters. In this regard, an additional capacity of 27 liters is mounted on board. Design features determine the filling capacity of the tanks of the considered modification by 2-3 liters less than the declared indicator. Fuel is supplied by a mechanical or electric pump. The system has a filter, and injection models have a gasoline vapor trap.
The wiring diagram on all truck versions is identical. It is built on a single-wire system, the machine body serves as a negative element. The voltage sources are a battery and an alternating current generator equipped with a rectifier. Electrical circuits are protected from short circuits by mounting devices with fuses, as well as by a reusable bimetal insert. Additional equipment can be equipped with separate protective devices mounted inside the unit.
Characteristics of UAZ-39094 "Farmer" andbody dimensions
The passenger-and-freight version is made on the basis of a steel frame with an increased wheelbase. The truck is equipped with a solid metal cab that can accommodate five people. Entrance is through three hinged doors. The body is located directly behind the cab, has arches for mounting the awning. The floor of the platform is made of wood.
Technical parameters and dimensions:
- length/width/height - 4, 82/2, 1/2, 35 m;
- wheelbase - 2.55 m;
- curb weight - 1.99 tons;
- top speed - 127 km/h;
- trailer weight - 1.5 t;
- arrival angle - 28°.
- height/width/length of UAZ "Farmer" body - 1, 4/1, 87/2, 08 m.
The characteristics of the loading platform make it possible to mount devices for road or utility work. Loading capacity - 0.7 t.
Model 390995
This modification of the UAZ is a cargo-passenger van that can accommodate seven people and almost half a ton of cargo. Rear seats - folding type, transforming into sleeping bags. The distinguishing features of this machine include the ZMZ-409 engine with a capacity of 112 "horses". The design of the front axle includes disc attachments equipped with ABS indicators.
On some modifications of this truck, the UMZ carburetor power unit (84 hp) was used. These versions featured drum brakes on all wheels without ABS, and a luggage rack was standard in the cab.
Parameters of UAZ-390945 "Farmer"
The body dimensions of this car are 2027/1974/140 mm (length/width/height). Other specifications are listed below:
- fuel tank capacity - 50 l;
- maximum weight - 3.07 tons;
- length/width/height - 4847/2170/2355 mm;
- fuel consumption - 17 l/100 km.
The truck is equipped with a two-row cab located on an elongated frame. Capacity - five people. Interior heating is provided by two liquid-type heaters with individual fans. The onboard cargo platform is made of rolled steel, it is possible to install an awning.
On the onboard UAZ "Farmer", the body size of which is indicated above, a ZMZ-40911 engine with a power of 112 "horses" is mounted, aggregating with a four-mode gearbox. The front and rear suspension includes double-acting hydraulic telescopic shock absorbers. The control is facilitated by the hydraulic power steering, the power of the electrical equipment generators is 1.1-1.3 kW.
Modification UAZ-390944
The indicated vehicle is equipped with a five-seater cab and a cargo platform capable of transporting 0.7 tons of cargo. Chassis base increased to 2.55 meters. The total weight of the machine is 3.05 tons, the speed limit reaches 110 km/h. At the same time, fuel consumption fluctuates around 17-18 l / 100 km. The cabin is heated with a regular heater, the fuel tank holds 50 liters, additional tanks are not available on this version.provided.
Option index 390994
The body dimensions of the UAZ "Farmer" of this configuration are identical to the basic modification. The all-metal cabin is placed on a chassis with a base of 2.3 meters. The cabin accommodates seven passengers with a driver. The cargo part is separated by a bulkhead, the carrying capacity is 1 ton. The UMZ-4213 engine with a volume of 2.9 liters and a power of 106 hp acts as a power unit.
The truck's transmission is a four-speed gearbox with a power take-off. On some variations, a front axle with a switchable drive was used. The brake system consists of a main drum element and a parking brake. The steering structure is made according to the scheme: a worm gear and a two-ridge roller without an amplifier.
Series 33094
The dimensions inside the body of the UAZ "Farmer" of this model, together with a powerful engine, made it possible to increase the carrying capacity to 1075 kilograms. The passenger-and-freight van is driven by a 112-horsepower "engine" with distributive fuel injection. The maximum speed of the car is 115 km/h. Cooling is carried out using a pump that forcibly pumps the refrigerant. Interior heating linked to cooling jacket.
Later modifications introduced disc brakes on the front wheels, as well as the ABS system. At the rear, there are drum brakes with automatic clearance adjustment. The truck comes standard with a 56 liter fuel tank plus an additional 27 liter capacity. Betweenthe tanks are connected by special lines, equipped with meters for the amount of liquid.
Versions 390942 and 390902
The dimensions of the "Farmer" UAZ-390942 body differ from the standard loading height reduced by 10 centimeters. In the design of the element, the floor is made of wood, and the flaps are made of metal. The manufacturer equipped the truck with ZMZ or UMZ carburetor engines, accelerating the car to 105 km / h. The capacity of the fuel tanks was increased to 112 liters, which made it possible to overcome over 600 kilometers at one gas station. Tanks are located on the sides of the frame part under the cargo platform.
The universal analogue of brand 390902 is focused on the transportation of seven passengers and 450 kilograms of cargo. The transport compartment is separated from the cabin by a metal partition, which has a small window. A gasoline engine with a power of 76 "horses" accelerates the car to 110 km / h. The total weight of the truck was 2.82 tons, the brakes were drums with hydraulically driven pads. The system has a vacuum booster located under the radiator lining.
Finally
Undoubtedly, the UAZ "Farmer" is popular with the population due to its high cross-country ability. Its design cannot be called ideal, and the interior comfort leaves much to be desired. Nevertheless, minimal amenities allow you to move around normally in winter and summer. Despite the simple forms, the technical qualities of the car are at a decent level, taking into account the fulldrive and high ground clearance (22 cm). The truck easily overcomes small water obstacles up to half a meter deep, while the approach angle is 28 degrees. Due to the variety of modifications, the car in question is used not only for freight transport, but also for transporting people, as well as special vehicles.
Recommended:
Repair and painting of a car body: features, technology and reviews
The body of a car is essentially its supporting structure. He is constantly under pressure. Moreover, these are not only mechanical factors in the form of shocks and vibrations. Every day, the coating of the body is exposed to the negative effects of external factors. Enamel is sandblasted, burns out. In addition, traces of rust appear at the site of deep scratches. Of course, all this significantly spoils the appearance of the car. But what to do?
Installing a body kit on a car. Installing an aerodynamic body kit
Installing a body kit on a car can be decorative or perform certain functions. The installation of aerodynamic body kits helps to create artificial downforce, thereby facilitating driving and increasing its dynamic performance
Repair and restoration of the car body: step by step instructions and device
Even if you get into a small accident, the price of restoration work can be quite high. It seems that the complexity of the work is small and there is nothing complicated in their implementation. If there is a great desire, a little time, the necessary resources and tools, then restoring the body on your own is a completely feasible process. Let's look at the recovery technologies in stages
What are the body dimensions of the GAZelle, and what is the best choice for a small business?
The cargo transportation market in Russia is gaining momentum every day. Demand is not only for the services of heavy trucks, but also for light commercial vehicles. GAZelle is currently the absolute leader in this field. Not a single apartment or office move can do without her participation, she promptly delivers any goods to any destination: building materials, electronics and even perishable products
Tuning "Nissan-Maxima A33". Chip-tuning of the engine, fine-tuning of the interior. External body changes, body kit, wheels, headlights
Versions in the maximum configuration are equipped with large 17-inch wheels, an electric sunroof, a climate control system, leather seats, heated rear-view mirrors and automatic folding. You can list all the options endlessly, because "Maxima" belongs to the business class and fully corresponds to the assigned level
