Logo carsalmanac.com
How to start a scooter: expert advice
How to start a scooter: expert advice
Anonim

How to start a scooter? The person who bought it does not always know how to do it. There are situations in which the owner of this unit loses the keys. What to do in this case? Read the article and you will know the answer to this question.

how to start a scooter

What are the two ways to start a scooter?

In the case when you are going to do this for the first time, you should check the presence of gasoline in the tank. Then you need to think about how to start the scooter.

First make sure the machine is resting on the footrest. Next, you need to insert the ignition key to the “On” mark. After that, the control panel will light up, the arrow that shows the fuel level will rise up.

There are a couple of options for how to start the engine.

The first way is to act with a kickstarter. As a rule, the engine always starts in this case. This option can be used when there is a dead scooter battery, or it has been in a garage for a long time, for example, and no one has used it for a long time. So, you should press the kickstarter's folded leg several times. Even if it's badthe scooter starts, you should not stop. You need to repeatedly press the kickstarter to start the engine.

how to start a scooter without a key

How to start the scooter in a different way? The following method can only be used with a working battery. This is done with an electric starter. It is also suitable for those who move a lot on this unit and, accordingly, stop several times. So, you will need to press the brake lever and at the same time press the starter. At the same time, you should hold the brake. The electric starter button should not be released until the engine starts.

Lost scooter keys: what to do?

Experts advise to make a spare set so that there are no such situations. But if you still don’t have them, how to start a scooter without a key? You can try to do it yourself or contact a specialist.

Let's consider how to start a scooter without a key yourself. In order to gain access to the ignition lock, remove the front shield. Then unscrew the two screws and remove the contactor. You will then need a flathead screwdriver. Use it to rotate the core until it stops. It happens that an action can only be done up to the penultimate position. It is called safe engine start mode. It is used to prevent the scooter from moving abruptly.

If the ignition lock is not disassembled, then you will need to remove the chip from it. After that, you should find a contact pair.

Remember that doing the wrong thing can lead todamage to the scooter. In addition, following all the recommendations does not guarantee that the scooter will start immediately.

Some information about management

Driving a scooter is very easy. You just need to know what and where. On the right side there is a front brake lever, and on the left, respectively, the rear. There are also other items on the dashboard.

scooter battery

There is a handlebar on the right side. With the help of it gas. To do this, it must be rotated. There are also various kinds of switches, such as turn signals and lights. Here, in addition to everything, you can see the starter button and the sound signal.

How to push start a scooter?

In addition to the two main ways that were listed above, there are others. It turns out that the scooter can also be started with a rope and a pusher.

Let's consider the first way. First you need to provide access to the fan from the engine. After that, the impeller should be wrapped with a rope 4 times clockwise. Next, you need to pull hard. This method is suitable when the engine is not tired. In another situation, the second method will do.

how to jump start a scooter

So how do you jump start a scooter? There is an opinion that this cannot be done, since he has a variator. Actually you can.

In order to do this, access to the clutch bell should be provided. It is necessary to remove the variator cover. After that, the clutch itself and the bell should be wedged together. For this, a regular bolt from the cover is perfect.variator.

This method of starting the scooter will require two people. One of them will have to push the unit. And the second at the right time needs to put pressure on the back of the scooter. This is done so that the wheel spins. As soon as the scooter starts up, the bolt you put in will immediately fall next to it. So don't worry about it.

How does a cold start work?

People have to use the iron horse even in the cold season. It doesn't always turn on. What to do? How to start the scooter in this situation?

To do this, you need to refuel with fresh gasoline and change the oil to synthetic. The latter differs in that it does not thicken in the cold. And it is better to start your iron horse with a kickstarter, and not an electric starter. How to do this was described in the previous sections of the article.

Also, after the engine starts, you should give a little more gas than usual. The actions taken will ensure that the scooter will not stall. If, nevertheless, it does not start and stalls, you should try to warm up the oil with a blowtorch.

If all the described conditions are met, the engine should start at a temperature of -19 degrees. After the start, the iron horse needs to warm up for 15 minutes. After that, you can safely go on your route.

Why won't the scooter start with the button?

This situation is also common. If the scooter starts with the kickstarter and not with the button, then the problem is in the main fuse. It is located in the battery compartment. Fora multimeter is needed to check its he alth.

scooter not starting

This machine should be set to DC voltage measurement mode. Note the voltage results before and after the fuse. It must remain unchanged. If it drops or rises a few volts, the fuse will need to be replaced.

The problem may be not only in this, but also in the engine starting circuit. Here the integrity of the connecting wiring is violated. In order to deal with a problem of this type, you will need an electrical circuit of this circuit. In addition, it must be able to read correctly. Therefore, in this case, you should contact an intelligent specialist.

Popular topic