2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
The Moskvich-2141 car, which can be tuned by yourself, was made at AZLK. During production, about 800 thousand copies were produced. They are presented in two versions: standard and upgraded with a motor from Renault. The second modification favorably differs in size, shape and chassis. Consider the possibilities of improving a car whose serial production is discontinued, but it can often be found on the roads.
Lighting elements
Tuning "Moskvich-2141" often begins with a modification of appearance. A large aesthetic and practical role in this is played by the replacement of optics. This is due to the fact that native lights do not illuminate the road very well and have a rather primitive shape.
There are several options for improving the optics of the car in question. The cardinal decision will be the replacement of rectangular elements with round counterparts. For this purpose, you can use affordable headlights from the VAZ-2106. They should be mounted two pieces on each side, and you will have to do without installing a factory grille, since it is designed for rectangular illuminators. Alternatively, you can use a metalframe mesh, securing it securely at the front of the machine. It is advisable to mount turn signal repeaters, since the triangular niches in the wings will need to be welded.
For those who choose this option, it will not be out of place to install the turn signal above or below the round lamps using SMD 5050 LEDs. This light strip has 3 times more power than the closest competitors. When choosing illuminators, consider their protection against moisture. If desired, you can use two pairs of tapes or additional factory indicators that are mounted on the sides of the wings.
What to change in the cabin?
For model 2141, it is better to start tuning this element with a torpedo. There are several options for replacement: "Nine", "Opel Vectra", "Volvo", "Mazda". A similar part with the Audi A4 is optimally suited. Before replacing a torpedo, it is necessary to take into account a number of nuances. After installing the new element, the front of the cabin will be pushed forward more and lowered to the floor. Such a design can create certain inconveniences for tall drivers with long legs, especially during long journeys.
In general, the option under consideration will not require fundamental structural changes inside and outside the car. The Audi torpedo has a multifunctional unit with control controls and an air supply system (warm or cold), which simplifies its installation.
Tuning bumper "Moskvich-2141"
Most often change the front element. Relatedthis is due to the fact that the rear bumper received a bizarre shape during the tests, but it turned out that it shows excellent aerodynamic qualities, confidently resists air currents.
You don't have to throw away the stock model, just lower it. This can be done with a suitable front "skirt". Next, the bumper is repainted to match the color of the car, equipped with PTF or daytime running lights. Such a reformation will significantly improve the exterior of the car.
In addition, the bumper can be spliced, leaving the native top, and attach a new version from the bottom, for example, from the VAZ-2114. You can do this yourself with the help of improvised means. Initially, the part should be cut with a grinder along the upper line of the license plate, and in the donor kit, the cutting line is selected depending on the expected height of the finished product.
Recommendations
When tuning the bumper 2141, do not use a riveting gun to connect the visible parts. Optimal is a galvanized building hood and a soldering iron. When heated, the sharp edges of the grid will be melted into plastic, and after cooling, they will be firmly fixed in it. Use a blow dryer to achieve the desired curve.
After joining the elements to be processed, putty the joints with a special mixture for polymers. Then you need to sand the product with sandpaper fraction 800-100. Before applying the paint, treat the surface with an acrylic primer, and after painting with a protective varnish. When the varnish is completely dry, the bumper is polished.
When further tuning AZLK-2141, use branded ready-made kits that can be purchased at special workshops. The set usually includes the following items:
- Arch covers.
- Body kits.
- Bumpers.
- Thresholds.
These parts are mounted using a special sealant.
Engine boost
The most effective way to improve the performance of the power unit and reduce its noise is to completely replace the motor. As a donor, you can use the installation from "Audi-80". This motor will help to significantly improve the dynamics and power of the car in question. In this direction, do-it-yourself tuning 2141 requires the purchase of all necessary consumables. It is best if it is the entire engine purchased at a disassembly. Then you should dismantle the standard Moskvich engine without disassembling it into small components.
The old engine itself, gearbox, axle shafts, radiator are removed. Then the place under the hood of the car is carefully cleared. This operation must be carried out carefully so as not to damage the wires. The gearbox is completely disassembled, its parts are diagnosed. Next, the assembled native gearbox and the new motor are tried on. If all the elements fit, the structure is fixed, after which it will be necessary to make a new subframe for the gearbox.
The next stage of motor improvement
Next, tuning 2141, spare parts for which can be found at disassembly or "athands" is carried out as follows. It is necessary to make sure that the latches of the internal CV joints are located strictly opposite the hubs, and the power unit itself is in a longitudinal slope. Not everyone gets it right the first time. This stage of modernization is extremely important, the operation of the motor and the presence of extraneous noise during movement depend on it.
After installing a new engine, you need to weld an intermediate tube from AZLK to the "trousers" of the power plant from Audi. A catalyst from a domestic car is not required, and a standard resonator and silencer can be left without modification, as well as a standard stabilizer. Together with the Moskvich power unit, it will be necessary to replace the backstage. To improve the final result, it is better to turn the sleeve of a greater length, install it instead of the handle, and mount the handle on top.
Finally
Tuning 2141 to carry out independently is quite realistic. Of course, you will have to spend a little money, but with the right work, the result will be worthy. First you need to stock up on all the required tools and spare parts. Next - a matter of technology.
Recommended:
Niva-Chevrolet off-road tuning: features and recommendations
Niva-Chevrolet off-road tuning: features, methods, benefits, photos, permits. Recommendations for the modernization of the suspension, interior, wheels, engine. Chip tuning "Niva-Chevrolet": how to perform and what does it give?
Car controls: features and recommendations
In the interior of any modern car, a huge number of different buttons. It doesn’t matter if they are touch-sensitive, mechanical, or even drawn on a huge Tesla display, it can be difficult for even an experienced driver to figure it out right away in a new car. All controls can be divided into three groups: main, auxiliary and comfort function controls
How to install a car seat: features, types and recommendations
Modern parents live in a high pace of life, and the car is the main assistant of many moms and dads. It allows you to move around the city with a newborn in a convenient and comfortable mode. A small child, like no one else, needs protection from injury. For the transportation of infants up to a year in the car, a special chair is used - a cradle that meets all safety requirements
How to feel the dimensions of the car: practical recommendations and features
To realize the dimensions of the car and get used to them can only be experienced. It is better to practice on a desert site using road caps
"BMW-E34": DIY tuning. Features and Recommendations
Old BMWs are among the most frequently modified cars, including the E34. Tuning of such machines is due to their popularity among young users. 5 Series has a special specificity. Due to its size and weight, it is rarely used in motorsport, and it is also poorly suited for the role of a comfortable car. Therefore, the vast majority of serious tuning projects are represented by fast city cars