How to start a car without a key yourself

How to start a car without a key yourself
How to start a car without a key yourself
Anonim

Every motorist should be prepared for all sorts of breakdowns and other unexpected nuances, regardless of the brand, condition and year of manufacture of his car. Take, for example, the situation when you, having gone to nature or being far from home, accidentally lost or broke the ignition key. Such cases, as practice shows, are not uncommon at all.

So, how to start a car without a key? It would be ideal to have a multi-tester handy, but otherwise a regular flashlight bulb will do. The key inserted into the ignition can have three states: this is power on and off, as well as supplying it to the starter.

how to start a car without a key
how to start a car without a key

Based on this, you need to find three groups of wires. The first are those that are powered by the battery, the second give it to the car if they are hooked up to the first, and the third - to the starter when connected to the first. Usually the second and third groups exist as one wire, so it will not be too difficult to figure out how to start the car without a key.

So, the thickest and brightest wire is the main power supply, in some cases there are several of them. Grounding is usually black or green. If nutrition is a bundle, thenwe check each wiring included in it with a multitester, and if there is none, we close it for a short time with a minus and check if there are sparks.

Did you check? We continue to figure out how to start a car without a key. Now all those wires that give a spark, and the minus need to be separated. To find the one that supplies power to the starter, you need to put the car in neutral and handbrake. Next, we check the rest of the wiring by connecting to power until the starter works.

Next, to start the car without a key, we connect power and ground, fastening them with electrical tape. We close those wires that carry power to the starter with the rest of the wiring before starting the engine, after which the power must be removed.

car door opening
car door opening

If you need to open the car, you can try to do it with a wire hook. It is necessary to find an ordinary wire and bend it into the desired shape at an angle of approximately 450, the bent part should be no longer than 10 cm. Next, we push it between the glass and the window seal near the handle, trying to hook the rod with button and lift it up. This opening of car doors is ideal for domestic models.

open car
open car

For the second option, you need a loop of rope or fishing line. But it only fits if the button in the door has a ledge upwards.

There is another option with a wire hook for imported cars. The hook must be pushed inside the door by hooking and pulling the handle. You can push the wire ifbend the corner of the door with tools or improvised means.

If the battery is low and the central locking on the alarm system cannot open the door, you can use the lock cable in the hood by hooking it with something and pulling sharply towards you. If possible, you can connect the power using a different battery by connecting the wires to the ground of the car and the starter.

And, of course, the easiest way is to break glass if the weather permits.

Now, with the knowledge of how to start a car without a key and how to open the doors, it is not so scary to get into such unpleasant situations.

Recommended: