2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Everyone is well aware of how door locks work in cars of the Togliatti Automobile Plant, especially in classic models. The sound of slamming doors of the “classics” cannot be confused with anything. Very often, to close the door of the "Zhigulenka", you need to make a lot of effort. Long and painstaking adjustments of locks do not lead to the desired result. Even if it is possible to bring the operation of the mechanisms into the proper mode of operation, then usually after a short time the settings go astray. What is the way out in such a situation? How can this "disease" of the car be eliminated? There is a way out - this is the installation of silent locks on the VAZ.
What is a silent lock?
These mechanisms are the development of manufacturers of car tuning parts, which allows you to forget once and for all about the poor closing of doors on VAZ models.
You can install silent locks on the classics, as well as on other later cars from the Togliatti plant. There are models for different cars. They are installed asforeign cars and domestic cars.
Silent locks on Priora are very popular. The special design of the mechanisms allows you to nullify the resistance when closing the door. A little effort is enough - and it is almost silently transferred to the closed state. The mechanism is a latch that is triggered by the slightest effort. The lock closes securely, while there is no effect of a half-closed door, which is so familiar to the owners of this brand of car. Installing a silent lock on the VAZ-2107 is not difficult, and the result can significantly improve the quality of its operation. Door mechanisms on Zhiguli are starting to work better than on some foreign cars.
Durability of silent locks
Experience with these mechanisms shows that they last at least seven years without any special maintenance.
With careful use of the car, the locks can last until the end of the life of this car. Features of their design allow you to count on a long period of use. The details of the castle do not break over time, and their wear is completely insignificant. In standard constipation, there is constant mechanical contact between the metal parts of the system. In silent mechanisms, the impact is made between nodes covered with high-strength plastic, which significantly reduces wear. Also an important factor is the strength of the physical contact between the parts of the constipation. Silent locks-2107 have much less impact between nodes,than in standard mechanisms. By installing such constipation on the car, you can forget about the constant problems associated with closing the doors.
Silent lock maintenance
Silent locking mechanisms do not require any special service. They must be lubricated before installation for best performance. It is desirable to carry out processing with special compositions for locks, of which there are now a great many. Subsequently, it is advisable to periodically lubricate the mechanism.
Perhaps, over time, it will be necessary to make a small adjustment to the operation of the locks. Adjusting the closing of the door is not a difficult process. The progress of its implementation is described later in the article. The operation of the locks is so clear that it is not required to spend time and effort on maintenance and repair during operation. Installing silent locking mechanisms on a car allows you to get a wonderful result and not think about carrying out any work related to the service throughout the entire period of their use.
How hard is it to install a silent lock?
Surely silent locks are useful. How to make them yourself? Many Zhiguli owners, in order to solve the problem of closing doors on their cars, resorted to installing locking mechanisms on them from foreign models and more modern domestic counterparts. As a rule, such an operation leads to a significant alteration of both the lock being installed and the elements that actuate it. This way of solving the problem is too laborious and notalways leads to the desired result. Installing silent locks on the VAZ allows you to improve the operation of locking doors in a simpler way.
For all models of Zhiguli VAZ-2101-2107, as well as Niva, the design of the silent closing mechanism is the same. To mount it on a car, you do not need to resort to such operations as drilling, welding, cutting holes or other actions leading to a structural change in parts of the car. Simple manipulations, which most motorists can do, will allow you to install silent locks. 2106-2101 are those models that, in addition to the described "seven", most need such a modification.
What is needed to install locks on the car
In order to install a silent lock on the VAZ-2107, you must first purchase them. For their installation, high-tech operations should not be performed. Accordingly, the set of installation tools will not contain a long list. You will need a Phillips and straight screwdriver and a few wrenches. The main thing is to have a desire and make a little effort - and the result will not be long in coming. The result will be the transformation of the process of closing the doors on your pet from annoying and sometimes difficult to pleasant and almost silent.
Preparing for installation
Do-it-yourself silent locks are not that difficult to install. The most important thing is to perform operations in a certain sequence. First of all, you need to provide access for this operation. To do this, you have to dismantlesome items.
- First of all, the inner door armrest is unscrewed. It is attached with three bolts, under the Phillips bat.
- Then the power window handle snaps off. To do this, immediately remove the locking ring with a flat screwdriver or a metal hook, and then pull the part towards you.
- The next step is to remove the decorative rim from the inner lock opening handle.
- After that, you can remove the door card. It rests on plastic clips, very often they break during this operation. When installing the panel back, you need to change the damaged latches for new ones.
Having carried out the above points, we can consider the preparatory stage completed. Next, you need to remove the old locks.
Removing old locks
To remove the old lock, unscrew the five bolts located at the end of the door. They hold the lock itself and the window guide. After that, we remove them, releasing the locking mechanism from the latches of the lock drive rods. The plastic fasteners of the rods and pushers can be snapped off with a flat screwdriver. Impact on them must be carried out with extreme care so as not to damage them. The last step before installation is to remove the outer opening handle. It is removed by unscrewing the two nuts holding it from the inside of the door. It is more convenient to unscrew them with a socket wrench. After that, the handle can be freely removed from the outside. Now everything is ready to install new locks.
Installation of newmechanisms
You can install a silent lock on the VAZ-2107 in the reverse order from the disassembly process with some changes. The new mechanism is connected to the drive system in the same way, with the exception of one piece. Attachment of the thrust pusher to the rod of the outer door handle is added. Before installing it, the rod itself is disconnected, this part is attached to it, then everything is mounted in place. The handle is placed in its original position and secured with two nuts. Having snapped all the rods of its drive onto the new lock, you install the mechanism in its place. Then it is fixed with bolts. The power window guide is also screwed on.
Door assembly
All previous disassembly operations are done in reverse order.
- The door card is installed in place using plastic latches, if some were damaged during dismantling, they are replaced.
- The decorative ring of the inner door lock release lever is fixed in place.
- Puts into place and secured with a retaining ring window handle.
- The final step is to install the armrest in its position with three bolts.
Silent lock on VAZ-2107 installed. Now it remains to configure it correctly.
Adjusting the mechanism
Having installed silent locks-2107 on the car, in order to fully use all the advantages of the mechanisms, it is necessaryset them up correctly. Adjustment is carried out by moving the latch fixing bolt. First you need to let him go a little and close the door. He must take his place. Then carefully open the door, being careful not to move the bolt. Next, you need to check the quality of the door latch. If it does not completely satisfy, then you need to continue the configuration. By releasing the bolt and shifting it, it is necessary to achieve a clear operation of the mechanism. The door should be closed from minimal physical impact on it. By repeating the adjustment operation on all doors, you can enjoy the perfect operation of the car's locks.
Opinion of users
Not only the classics are subject to the use of these mechanisms. Silent locks are now being installed on Priora, nines, dozens, and even foreign cars. You can often hear admiring reviews from owners who have installed silent locks on classics. First of all, it is surprising that even on the oldest Zhiguli, the doors begin to close, like on cool foreign cars.
Silent locks 2109, 2110 and other models cause genuine admiration among motorists. Instead of slamming the door with all its might, now it is enough to lightly press it with literally one finger, and after two light clicks it is brought into a closed state. Previously, by the loud sounds that announced the surroundings, one could immediately guess what brand of car had arrived. Now you can close the door on any car with a similar modification almost silently and effortlessly.
Using silent lockson all vehicles that lend themselves to such alteration, leads to an improvement in the quality of operation of the machine. The consequence of this is an improvement in the level of comfort and positive emotions that the owner of the vehicle experiences after installing such mechanisms. Many drivers recall with horror those times when using door locks brought only annoyance. Silent locks are a good choice for your car.
Recommended:
How VAZ, GAZ and other cars of the USSR stand for. Full list
We all know that in the Soviet Union there was a developed automotive industry that produced many types of automotive equipment under different brands. At present, it is rare to find this product of the USSR anywhere. In this article, we will not limit ourselves to answering the question of how VAZ and GAZ are deciphered, but we will also talk about them
Brands of cars, their logos and characteristics. Car brands
The number of modern car brands is almost impossible to count. German, Japanese, Russian and other cars fill the market without interruption. When purchasing a new machine, it is necessary to carefully study each manufacturer and each brand. The article below provides a description of the most popular car brands
Operation and maintenance of batteries. Battery repair. Car battery brands
The article is about batteries. Measures for servicing batteries, their design, varieties, nuances of operation and repair are considered
Badges of car brands and names. German, American and Chinese car brands and their badges
Badges of brands of cars - how diverse they are! With and without a name, intricate and simple, multi-color and plain … And all are very original and interesting. So, since German, American and Asian cars are the most common and in demand, then using the example of their best cars, the topic of the origin of emblems and names will be revealed
Inexpensive station wagon: brands, models, manufacturers, specifications, equipment, declared power, features of operation and maintenance of the car
Inexpensive station wagon can be of high quality, comfortable and meet the generally established safety standards for the driver and passengers. Among the various brands and models, there are both new and old, both domestic and foreign cars. If you go to any site for the sale of cars, you can see how many station wagons there are. Therefore, it is possible to choose