"Angel Eyes": installation, features, types and reviews

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Tuning "iron horse" - a common phenomenon among car lovers. With the advent of LEDs in the world, there is not a single driver left who would not want to use luminous lights. Lamps with a bright and attractive light have become a popular decoration for car headlights. Such light is installed on the headlights of the main and dipped beam, and is also used in the form of marker lights. Such lighting novelties have an original name - "angel eyes".

"Angel Eyes" are LED rings built into the headlights of a car. The variant is popular in cars with double round headlights. By installing such a device, you can highlight your car, as well as decorate it at an affordable price.

Choosing light rings

The production of new items was quickly established in China. Since there is a great demand for LEDs, and the manufacturer seeks to increase profits, the quality of the device suffers.

Over time, some of the crystals in the lamp stopped shining, and due to power surges, they simply burned out. The reason for these shortcomingsis the quality of the crystals and the lack of a 12V stabilizer. During power surges, the low-quality crystal quickly goes out, causing the light halo to break, and the tuning looks pathetic.

Views

There are several types of LED lamps for installing "angel eyes".

They have their pros and cons:

1. High-discharge CCFL lamps are made with a cold cathode. The device is filled with an inert gas and mercury impurities. A big plus in use is a bright and uniform glow. For the operation of such a backlight, an ignition unit is required, which converts the voltage of 500V to 12V. The disadvantage is a weak ignition unit.
2. The first diode SMDs used diode crystals, which also caused the quality to suffer. But when one crystal burns out, it can be resoldered. Later, SMD was replaced with COB LEDs, which are more practical.
3. COB LEDs have a uniform glow around the entire circle of the lamp. New technologies make it possible to improve heat dissipation from crystals. But because of the quick profit, the Chinese continue to install low quality crystals. The disadvantages of the OWL is that if one crystal deteriorates, then the ring cannot be repaired. The advantage of LEDs is that they give the most uniform color.
4. Diode RGB have an advantage over other "angel eyes". Since they have a different color glow, the controller, when mixing red, blue and green, can produce many other colors and shades. Color change is done using the remote control when usinginfrared or radio channels.
5. Diode two-color lamps combine tones such as:

• white and yellow;
• white and blue;
• white and green.

Bi-xenon lenses are preferred by auto mechanics for BMW angel eyes, as they can simply be turned off if the ring fails.

The use of LED rings as daytime running lights is prohibited.

Installing "Angel Eyes" with your own hands

The procedure for installing and replacing "angel eyes" occurs with the analysis of the headlight and the use of high-quality sealant. You can install them yourself or buy ready-made headlights with built-in light rings. Rings are made and sold in different sizes, from 60 mm to 160 mm in diameter and in 10 mm increments.

Many car owners have a problem with complexly shaped headlights, since round lights cannot be installed on an uneven surface. They can be fitted with flexible neon tubes that can be neatly trimmed and bent to fit the outline of the headlights.

If a car enthusiast has the opportunity to spend more money, then it is better to buy tuned headlights "angel eyes" for installation on a BMW. They already have bi-xenon lenses or regular xenon lenses, as well as other useful novelties.

If the owner of the car has a small budget or has a desire to try to upgrade the headlights himself, then they are removed and a seat is prepared forlight bulbs.

To do this, you will have to do the following manipulations.

When carrying out the installation of angel eyes headlights, a colorless sealant is applied to the inside of the ring, the device is applied to the reflective surface of the headlight and pressed for high-quality gluing of the surfaces. After the sealant has completely dried, the system is connected to the car network. After the LED ring has worked, the headlights are assembled. Glass is planted in the groove in which it was previously located using a sealant. After the seams have dried, the headlight is put back in place and connected.

Expert reviews

This group includes auto mechanics, specialists in unlicensed repair shops, as well as specialists in the installation of glowing rings. Professionals pay the attention of a motorist, first of all, to the price of "angel eyes". A high price does not always show the quality of the product, and a low one makes you think about the functionality of the rings. In terms of practicality, features such as:are the first to be evaluated

• device glow brightness;
• energy intensity of products;
• how suitable is the type of this or that kit for your car.

Customer Reviews

As you know, there are many opinions on this matter, but most do not like the fact that the quality is lame. Other drivers "fanate" from bright and colorful lights. Since the choice is everyone's business, it is necessary to weigh the pros andagainst and make the right decision in favor of quality or beauty.

In order not to fall for the tricks of product manufacturers, you should always pay attention to product flaws. If there are more of them than pluses, then you should not console yourself with bright hopes that you will come across a quality copy. Also pay attention to the reputation of the company. If the price is below average, then it is not a fact that the "angel eyes" will glow for a long time and with high quality.

In closing

Buy long-lasting "angel eyes" is possible, but in rare cases. The lighting effect of the headlights leaves a wonderful impression on people and also makes the car more conspicuous.

If a person does not know what kind of glow is suitable for his car, and also cannot choose the lighting for his car, then a specialist in this field should be consulted.