2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Handbrake was originally designed to prevent accidental movement of the car in the parking lot. The system is designed in such a way that when the lever is raised, the cables clamp the pads and the car remains stationary. Although experienced drivers prefer not to use the handbrake at all, especially in winter. The brake is the inclusion of a gear with the engine off, this not only increases the life of the handbrake, but also avoids freezing of the brake pads in winter.
Repairing a handbrake is usually remembered before passing a technical inspection. There are several most likely causes of failure that you can diagnose yourself:
1) After removing the handbrake, the rear wheels do not rotate for some time, and after a short trip everything returns to normal. This is due to the souring of the handbrake cables, which leads to constant clamping by the pads.brake disc. Only a replacement will fix this problem.
2) Handbrake doesn't work at all. Most likely, the reason is that the cable has exhausted its resource and, with another effort, simply burst.
3) You have to raise the lever too high to keep the machine in place. Here, most likely, pad wear occurred, which led to an increase in the gap between the pad and the brake disc. Replace and if the result has not changed much, tighten the cables.
Oddly enough, a broken hand brake is a fairly common occurrence among those car owners who practically do not use it or use it for other purposes. For example, now there is a huge fashion for the so-called drifting (controlled skid), where novice drivers, after watching a movie, begin to drift without equipping their cars at all, which can lead to disastrous consequences. For such entertainment, a hydraulic hand brake is needed. Its design is slightly different from the standard one, and it is installed additionally, and not instead of the factory one. Such a brake will not keep your car on a slope, much less save it in winter, but it will help save the remaining parts of the parking brake for their further purposeful use.
This, it would seem, a trifle makes life much easier for many drivers, and sometimes saves it. There are frequent cases when only the hand brake saved from inevitable death due to the failure of the main braking system. Exactlytherefore, many professional drivers recommend monitoring the he alth of this mechanism.
It is worth saying that if you find yourself in the above situation, then in no case should you sharply pull the handbrake. Such a reaction will not only not save you, but can aggravate an already problematic moment by sending you into a skid. If you feel that when you press the brake pedal, the car does not stop moving, then calmly and as quickly as possible, you need to turn on lower gears with a smooth raise of the handbrake up. Shifting gears will allow you to slow down with the engine, and gradually applying the parking brake will prevent skidding and speed up the braking process.
Recommended:
GAZ 66: diesel is not a hindrance
Of course, if a diesel engine were serially installed on the GAZ 66, then the characteristics of the car would change for the better, but even without that, "Shishiga" demonstrates unique off-road patency, and as an army vehicle it has many different modifications, from a communication vehicle to a technical flyer and a staff car. "Shishiga" has come a long way and has always been the best
How to make a hydraulic handbrake with your own hands on a VAZ?
You can make a hydraulic handbrake for tuning yourself. VAZ of any model is equipped with a hydraulic brake system, but the parking cable design. This impairs performance, since the cable tends to stretch, so the effectiveness of the handbrake is reduced. And the drum brakes themselves are not very reliable
Specifications "Suzuki Jimny" - the size is not a hindrance, but a virtue
Technical characteristics of the "Suzuki Jimny", although they allow you to move freely enough on bad roads, do not turn the jeep into an off-road conqueror. Nevertheless, the car will perfectly serve outdoor enthusiasts and those who are looking for unity with nature. It is not intended for large companies, but is best suited for just a few people, allowing them to reach difficult places and visit secluded corners
Car maintenance is an objective necessity. What is included in the current car repair
Maintenance of vehicles are economically necessary actions, since it is not advisable to stop the operation of equipment due to a breakdown of one or another unit and unit. Work on the current repair of the car should not stop throughout the entire period of its service, only such a condition will allow the mechanism to serve for many years without stopping for major repairs
How to tighten the handbrake with your own hands? Instructions, signs of malfunction
As you know, the car uses several brake systems. In addition to working and spare, there is also a parking lot. In the common people, it is called the "handbrake". On trucks, this element is driven by air. But on ordinary passenger cars and minibuses, this is an archaic cable element. The design is quite simple (since it does not require a compressor, receiver and other parts, as in a pneumatic system), but it needs periodic adjustment