Towbar on the Chevrolet Niva: review, installation, models and owner reviews

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

"Chevrolet Niva" is an SUV that is gaining more and more popularity among car owners. No wonder, because the car is practical, reliable and will not get stuck in the first hole. Trips out of town in sedans become a complete torment. Often, lovers of long trips and outdoor recreation think about using additional equipment.

What is a hitch?

The tow bar for the "Niva" is a special coupling device designed to connect a car and a trailer. Such a device allows you to carry additional cargo that has no place in the cabin and luggage compartment of the car.

If the vehicle itself is a threat on the road, then a car with a towbar is a double threat. For this reason, the selection and installation of equipment must be taken seriously.

Manufacturers of towbars for "Niva" have the appropriate specialized equipment, all parts are quality tested and have the necessarycertificates of conformity.

Handmade towbar models

The first Niva models did not have the necessary towbar attachment points, for this reason, car owners had to develop and install equipment on their own or contact handicraft workshops, which created significant risks.

Independent production of towbars involved several types of installation:

1. Installation and mounting on the bumper rails.

2. Installation and fastening on the side members and the body.

Such designs did not pass any checks, so they often became the cause of traffic accidents. In addition, the appearance of the installation itself sometimes caused bewilderment among passers-by. Often the client expressed a desire to use gas equipment, the cylinders of which were installed just on the back of the car. For this reason, the design was attached to the spars, and its appearance turned out to be rather strange.

Towbar on Chevrolet Niva

Chevrolet Niva, unlike its predecessor, has the necessary elements for installing equipment:

1. There are attachment points that are reinforced with threaded connections.

2. Towbar attachment points are available on any Chevy, but when selling a model without a towbar, they are simply sealed with tape.

It is for this reason that the owner of an SUV can independently cope with the installation of the towbar, following all the necessary requirements. Now the hitch on the Chevrolet Niva is finecomplements the vehicle to ensure safe operation on the road.

The improved model of the machine made it possible to make the towbar not only a means for attaching a trailer, but also an element of bottom protection. The ease of use of the design is felt at the first application. Any distance to the updated SUV will be on the shoulder.

Terms and conditions of operation

To safely install and use the towbar, you need to know some rules:

• Although the maximum towable weight is 1300 kg, it is not recommended to reach the maximum point to avoid damage and accidents.
• Vehicle speeds over 90 km/h are not allowed.
• The static load on the clutch must not exceed 50 kg.
• Installation and maintenance of all equipment must be carried out according to the prescribed rules.
• It is better to install additional equipment for safety reasons in a specialized service center.
• It is forbidden to change the design of the traction component. Otherwise, the manufacturer is not responsible.

Complete set of standard installation kit

If you still decide to install the towbar on the car yourself, then you can purchase special equipment both in a car shop and in a car dealership. Before making a purchase, consult with the seller and make sure for yourself that this kit is designed for ChevroletFields.

The standard set includes the following items:

• Tow bar.
• Socket.
• Postings.
• Rozetnik.
• Balloon cap.
• Necessary fasteners (bolts, nuts, washers, caps).

In addition to the set should be attached: installation instructions and a certificate of product quality.

Installing a towbar: "Chevrolet Niva"

The process of equipment installation is simple and does not take much time. Some craftsmen cope on their own with the procedure in 10-15 minutes. The main rules for reliable installation and operation in the future are compliance with the installation rules and the use of only certified components.

Installation can be divided into two steps:

1. Installation of power elements.

2. Connecting an outlet to the vehicle's electrical wiring system.

Installation of load-bearing structures

The towbar on the "Niva" is installed as follows:

• The car is installed on the bridges over the pit.
• The equipment installation sites are being washed.
• Removing the tape pasted at the factory.
• The tow bar is attached directly to the Niva.
• The bolts included with the towbar kit are treated with grease.
• Install equipment carefully, tighten bolts well and securely.
• To reduce corrosion, the attachment points should be treated with a special compound.

Connecting the electrical component

Installing the towbar on the "Niva" involves connecting the electronics. This process is quite complicated and requires care, since the quality of the car will depend on it. If the equipment is connected incorrectly, electronics or wiring insulation may burn out.

For a proper installation, you will need a vehicle wiring diagram, which is usually included in the kit. Additionally, look for a pinout diagram for the socket.

The process of connecting an electrical outlet will consist of the following steps:

• Turn off battery pack.
• Remove the headlight assembly (mounted on the back of the car).
• Using the diagram, install the wire you need.
• Use isolation protection.
• Screw and solder the wire connection.
• Connect the remaining end to the required contact of the power socket.
• The same procedure is provided for all contacts. There are 6 of them in the standard set. If you want to install a foreign-made trailer or camping, then keep in mind that they have 9 contacts. Additional elements are used to connect household appliances.
• Separate the joint with special tape.
• Reattach the headlight assembly.
• Connect all electronics and test the operation of the entire installation and standard functions of the car (working side lights, turn signals and brake lights).

Price of equipment

BStores offer a wide range of models. You can pick up a towbar for a Chevrolet Niva at a price of 2,500 to 5,000 rubles.

Instead of afterword

Thus, the towbar for the Niva, the price of which is quite acceptable for most car owners, is a very convenient and practical device. Its quality and ease of use are especially appreciated by lovers of fishing, hunting and recreation outside the city. Installing the equipment is a simple matter, you just need to be careful and follow the instructions.