Crawler mini tractor: brief description and recommendations

Table of contents:

Crawler mini tractor: brief description and recommendations
Crawler mini tractor: brief description and recommendations
Anonim

. In this regard, it is worth paying close attention to the caterpillar mini tractor.

tracked minitractor
tracked minitractor

Positive qualities of the machine

This compact version of the conventional standard tractor provides the user with an excellent opportunity to significantly speed up the implementation of many scheduled operations and at the same time reduce labor costs. The caterpillar minitractor is endowed with many positive qualities:

  1. The widest range of work performed: loosening, plowing, hilling, grass mowing, harvesting and sowing crops, clearing areas of snow, leaves and debris, etc.
  2. Increased traction made possible by the self-propelled track system.
  3. Sufficiently smooth running of the machine, which allows you to quickly overcome quite difficult sections of the underlying surface.
  4. Lowpressure on the ground due to the fact that the tracks have a much larger ground contact surface than the wheels. In this regard, the land is not compressed, and this is very important at the time of plowing.
  5. The minimum number of footprints left on the soil after machine operation.

Flaws

But in addition to the listed advantages, the caterpillar minitractor also has the following disadvantages:

  1. Slow movement speed. Often the car is not able to go faster than 10 km/h, and this in some cases is a serious barrier to its use.
  2. The named tractor consumes quite an impressive amount of fuel.
  3. Makes a lot of noise during operation, which during long-term use of the machine may affect the hearing and psyche of the driver.
  4. Unable to drive on highways and highways like a normal vehicle.
rubber tracks
rubber tracks

Engine

As with any machine, the motor is the main unit in the tractor, which is given the closest attention. Some craftsmen decide to assemble a caterpillar mini tractor on their own, and therefore such people should definitely know that the engine here must be a four-cylinder, have water cooling and a power equal to 40 horsepower.

Travel

Rubber tracks - this is the version of the supporting part of the tractor, which is gaining more and more popularity today. They are in no way inferior to the high-torque steel tracks that the vast majority are accustomed to.drivers of this vehicle. The size of the tracks always matches the dimensions of the tractor.

Economic option

The Uralets caterpillar minitractor is one of the most affordable units, which is also characterized by good efficiency. This machine is presented in three types. And each of them is distinguished by unpretentiousness to the quality of fuel and oil consumed.

crawler mini tractor
crawler mini tractor

This tractor is produced at an enterprise located in the Chelyabinsk region, and most of the components are also produced in Russia, which allows you to fully take into account the peculiarities of the local climate and bring the operation of the equipment in full compliance with it. Therefore, starting the car engine even in cold weather does not cause any difficulties. True, some elements of the tractor are made in the People's Republic of China.

The main technical parameters of the Uralets-220 tractor are:

  • 22 hp motor.
  • Specific fuel consumption 250 g/kWh.
  • Fuel tank capacity - 8 liters.
  • Movement speed - 27.35 km/h.
  • Car clearance - 300 mm.
  • Minimum turning radius 3900 mm.
  • The weight of the machine is 960 kg.
  • Wheel formula - four-wheel drive.
  • PTO frequency - 540 rpm.

The only significant drawback of the tractor can be considered that it does not have a cab in some factory models, and therefore its operation during heavy precipitation or at too low temperaturesenvironment becomes much more difficult, and sometimes simply impossible.

The rubber tracks of this tractor provide it with the highest traction properties, which allows it to be used even on very soft types of soil.

caterpillar minitractor Uralets
caterpillar minitractor Uralets

Recommendations for craftsmen

Today, many people seek to assemble a caterpillar minitractor on their own in order to save money. It is worth saying here that if you have certain knowledge and skills, it is quite possible to assemble such a machine yourself. However, it is important to consider that any home-made unit must be folded in strict accordance with the developed algorithm. Not the last role is played by spare parts, which very often in practice have to be adjusted to fit the mating parts. First of all, it is advisable to fix your planned actions on paper, and only after that proceed with the assembly.

Recommended: