Changing oil in a car box

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Every new car has a manual. This instruction must not be ignored. It is advisable to read it carefully. You can find a lot of interesting things in it. For example, there you can read about how the oil is changed in the automatic gearbox. To do this is not at all as difficult as it might seem at first. True, if you have never encountered such work, you can turn to the help of specialists in the service station.

If for some reason you have not kept the instructions from the car, then information on how to change the oil in the automatic gearbox can be found in all kinds of information guides on cars. It is also useful to look at the information on the Internet, to chat with the owners of cars of the same brand as yours, on the forums.

So, what do you need to know in order to make changing the oil in the box easy and simple? The oil that is in the box is completely unaffected by fuel. Also, neither soot nor condensate acts on it. But the oil gets dirty over time. This happens due to the fact that the mechanical parts insidethe boxes rub against each other and form small particles that settle into the oil. Each time the car is in motion, the oil in the box gets very hot. And this is also one of the reasons to think about the need to change the oil in the box. The owner of the car must remember that the oil in the box should be heated to no more than 90 degrees Celsius. If the oil temperature is higher, it begins to "wear out". If the temperature reaches two hundred degrees, the oil becomes completely unsuitable for further use.

And here is another reason to change the oil in the gearbox in a timely manner. Any automatic transmission oil contains special elements that prevent the appearance of corrosion and rust on the internal mechanisms of the car. But over time, the oil loses these useful properties. Changing the oil in the VAZ 2109 gearbox is done in the standard way. To do this:

• The car is raised using a special lift.
• The pallet is removed from the car.
• Carefully draining old oil.
• The old filter is being replaced with a new filter.
• The pallet returns to its place.
• New high-quality oil is poured through a special “neck” hole.

The gearbox will need to be flushed if the car has been driven for a long time without an oil change. For these purposes, special additives are used. Flushing the gearbox in such cases is a necessary procedure.before changing oil. Flush required for:

• Getting rid of soot.
• Getting rid of soot.
• Getting rid of other contaminants.
• Flushing oil channels.

To flush the gearbox, you can use special cleaning fluids that are sold at service stations or auto parts stores. In order to avoid problems with the car, change the oil in the box regularly. Even when the car is little used.