Car alarm Starline D94: installation and owner reviews

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

The D94 alarm complex has become a continuation of the Starline series of telematic security systems. And if in the previous versions of the A-family the calculation was for cars, then the D line focuses on the off-road segment. The rest of the fundamental direction of the security device remains the same. The creators sought to widely unlock the potential of modern wireless control, used satellite navigation sensors and traditional elements of anti-theft systems. The result is a functionally balanced Starline D94 system, which, at the same time, has many differences from similar offers from competitive manufacturers.

General alarm information

Starline presents a multi-component security complex based on an intelligent control system for protective devices. The main multisystems of the equipment include autorun, interactive access control code, wired and wireless interfaces, geolocation tools, etc. The user can control the Starline D94 GSM system using a mobile communication module, complete key fobs, or using the start button, which is installed on center panel in the cabin. Help inThe organization of interaction with automotive electronics is also provided by the GPS interface. It allows you to determine the location of the machine with an accuracy of several meters.

Physical protection is provided by anti-theft mechanisms that are built into the engine compartment, blocking the hood, doors and windows. Special sensors are used to automatically monitor potentially dangerous breakpoints. The Starline D94 key fob also informs about the state of the system, the display of which also shows information about other security components. As for the security of the alarm itself, the system is initially protected by a dialogue control code with personal keys. RF signal security is ensured by proprietary anti-interference isolation and a 512-channel low-bandwidth transceiver.

Installation requirements

First of all, the manufacturer recommends using the complex only as part of the on-board network of SUVs with a voltage of 12 V. Before installing the system elements, make sure that the local electrical equipment is properly and correctly connected. Even before placing the functional components, it is necessary to prepare the wires that will provide the power supply network and signaling data transmission. The laying is carried out so that the contours are as far as possible from the emitters of radio and electrical interference. These can be, for example, high-voltage wires, electromagnetic devices or ignition coils. In order for the Starline D94 alarm to have a stable power supply even in conditionsstrong vibrations when driving off-road, it is recommended to place cable lines without the risk of direct contact with steering rods, pedals and other moving parts and assemblies of the machine. If you plan to integrate additional relays into the circuit, then they should first be shunted with diodes.

Installing the main components

The main working component of any telematic signaling is the control unit. It is installed in the cabin and, if possible, in a hidden place - usually under the instrument panel. The device is fixed with the help of complete self-tapping screws or plastic ties. The fastening method is determined by the design of the SUV and the operating conditions of the unit. In this part, the main thing is to ensure the stability of the position of the Starline D94 equipment with the expectation of the same fluctuations and vibrations when driving. Another important nuance when installing this unit is to maintain a distance from heating sources. The controller device also provides for the presence of a temperature sensor, so third-party influence of climatic devices can distort the readings of this module.

No less significant is the transceiver, on which the quality of communication between the signaling components and the car owner depends. It is desirable to fix it on the windshield, but it can also be under the same instrument panel. In both cases, it is necessary to maintain a distance of 5 cm from the metal parts of the car body, lighting devices and sensitive sensors. Subject to this condition, the Starline D94 car alarm will be able to providereliable signal reception and transmission. The physical fastening of this module is carried out with plastic ties or double-sided tape.

Installing accessories

This group of signaling components includes an LED indicator, a remote temperature sensor and a siren. The light indication device can be fixed in any place of the machine, where its visibility in the active state will be guaranteed. It is desirable to fix the temperature sensor on the cooling system in the part of the pipe. Fastening is carried out with cable ties. There is also another fixation option - next to the power unit block by means of threaded connections of the appropriate size. To maintain the reliability of the installation, it is recommended to use the complete Starline D94 clamps. The instruction also indicates that the sensor must not be squeezed by a rigid mount. This is sought by inexperienced craftsmen who want to minimize the effects of vibrations on the sensitive element. As for the siren, the most advantageous place for its placement is in the engine compartment with the mouthpiece down. At the same time, it is also necessary to withstand the removal from sources of high temperatures and humidity.

Connecting the power supply

Connection starts from the black wire of the signal ground. This is done using a complete bolt. At the end of the wire, the terminal should be wound specifically for the format of the nut. Sometimes, again, inexperienced users connect the mass to the car body using self-tapping screws, but this optionundesirable due to the instability of the fastening. Connection of 12 V circuits is carried out by three red wires from the relay module. At this stage, several points must be taken into account. Firstly, the Starline D94 car alarm will ensure reliable operation only when connected to the battery with regular wires with a cross section of at least 6 mm2. Among the main connection points, one can single out the ignition switch, the control unit for the body electrical equipment and the assembly complex. Secondly, it is necessary to take into account the presence of fuses in the circuit, as well as their rating. The power supply of the central unit and the relay module must be connected on separate circuits and with separate fuses.

Features of connecting the Starline D94 CAN bus

In this case, the connection scheme is determined by the characteristics of a particular on-board network. For example, a CAN connection can be made using a single wire or through a whole group of channels. Also, some models of off-road vehicles do not support control through this interface by light signals. In such cases, the Starline D94 GSM kit must be connected to alternative control systems. In addition, this modification is by default focused on connecting without a CAN bus, as was the case in many previous generations. The new interface was added as an option.

Connecting additional devices

Additional components include an immobilizer and a temperature sensor, which should already be installed by this time. As for the first device, we are usually talking abouta regular module, the task of which is to prevent the keyless start of the engine. That is, in this case, a system will be installed that duplicates the function of the immobilizer. A module formed by two coil antennas will act as a simulator. They will provide switching by means of a relay. In this case, one coil must be paired with the ignition switch, and the second with the key. The Starline D94 temperature sensor is connected via a 2-pin connector on the controller unit. After connection, it is necessary to carefully isolate the contact points.

Positive feedback about the system

In practice, the system reveals itself with dignity. According to users, electrical connections work stably, eliminating the problems of interaction between the owner and the car. Here it is worth emphasizing the reliability of the devices themselves included in the kit. The functionality of Starline D94 GSM is also highly appreciated. Reviews of experienced car owners note that formally the complex does not offer anything new, but the very combination of functional systems at the output provides an ergonomic and reliable safety tool.

Negative reviews

The weaknesses of the equipment include the dependence of the radio transmitter on weather conditions and the incompatibility of the equipment with some models of foreign cars. There are also comments in terms of the operation of the key fob. The fact is that the Starline D94 GSM alarm system involves constant radio contact with the user by the type of synchronization. This is partly why the complete key fob of this system is often criticized forfast battery drain. In normal operation, batteries are not enough for 1.5-2 months.

Conclusion

As modern anti-theft protection systems, Starline products are trusted by both ordinary motorists and specialists. However, such complexes are valued not so much for their innovativeness and high level of protection, but for their affordable cost. In particular, Starline D94 with the installation can be purchased for 28-30 thousand rubles. Without installation work, the kit is available on average for 25 thousand. Setting up the modules will additionally cost 2-3 thousand. For comparison, offers from competitors of the same level are often estimated at 40-50 thousand. True, we can talk about multifunctional systems that are more dense also affect electrical equipment that is not related to the security and protective function of the car.