2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
No car will function without essential parts such as the engine and gearbox. For fastening each of them, an engine pillow is used, which provides maximum adhesion of the mechanism to the car body. Another important aspect is that it is thanks to such pillows in the passenger compartment that the vibration index, which is formed as a result of the operation of the motor and other mechanisms, decreases during driving. Airbags are available depending on the model and year of the car, so they can be divided into front and rear, as well as left and right.
Any engine mount is a kind of shock absorber that regulates the operation of all internal parts of the car. It consists of two elements, which are metal and rubber of high strength. Thanks to the first component, the engine mount secures any part in the most reliable way, does not allow it to move during movement, as well as during the braking process of the car. The metal case is attached to the motor from three sides, and to the gearbox from two, and connects these parts withbody. Rubber, which is part of the pillows, has a shock-absorbing effect, reduces the degree of vibration and wear of internal parts. Among the new types of pillows are also hydraulic, filled with glycol or another type of liquid. Such parts are used less often, although their technical characteristics are quite impressive.
The service life of the engine mounts depends on the mileage, as well as on how the machine is operated. Often, such parts fail due to the fact that they accumulate a lot of road debris, dust and dirt. This causes the rubber to harden, later it gradually detaches from the metal case and becomes unusable. It is the front engine mount that most often gets dirty and fails faster. Therefore, it is important to monitor its condition very carefully, checking not only rubber, but also metal, which can be damaged by corrosion, rust or machine oils.
The rear engine mount does not get dirty as quickly, its rubber wears out less often, and its iron retains its original characteristics longer. However, the condition of this part should also be constantly tested, because any defects can lead to unwanted damage that can happen to the car at the most inopportune moment. Checking and replacing the engine pads must be done in a car dealership, and not try to do it yourself. Otherwise, some of the parts that make the machine function may be damaged.
A sign that some kind of engine mount is out of order, has flown off or is damaged, there may be various noises in its operation and vibration. Often, shocks that occur during ignition, as well as during braking, are considered a sign of a breakdown of this part. Also, while driving, a faulty engine mount can generate a knock under the hood, which will be noticeable in the passenger compartment as well. In such cases, the replacement of the pillows is simply necessary, because they are responsible for the safe operation of the machine.
Recommended:
Studded tires - a guarantee of safety on the winter road
Every time winter approaches, motorists are faced with the question of preparing for this “slippery” time of year. Snow drifts on the roads create a risk of accidents. Winter tires are required to maintain control of the car in difficult conditions
Safety cage. Bolted and welded car frame
While watching videos and photos of sports cars, you can see one important feature - these are the pipes located in the cabin. They intersect with each other, and the driver of the car is, as it were, in a cage. It is nothing more than a safety cage. People far from motorsport may not know what it is. So, let's take a closer look at what this framework is for
A serviceable brake cylinder is a guarantee of safety on the road
It happened to everyone that sooner or later the brakes refused to work. It's bad when they are not as effective as they should be, but even worse when they disappear altogether. In both cases, some parts need to be replaced, say, a brake cylinder
Is it possible to drive on winter tires in summer: safety rules, tire structure and differences between winter and summer tires
There are situations in which the driver can use winter tires in the summer. This refers to wheel damage on the road. If the spare wheel in the car is studded, it is allowed to install it instead of the punctured one and drive this way to the nearest tire fitting point. For such actions, traffic police officers do not have the right to issue a fine. But you should figure out how the rubber intended for another season will behave on the road
"Nissan Tino" - comfort, compactness and safety
The Nissan Tino debuted in 1998. Despite the fact that this is a model of a Japanese concern, European developers worked on its design. This car was based on a platform taken from Sunny. The length of the machine reaches 4270 mm. But this does not prevent it from being considered one of the most compact in its class