Painting the rear bumper: the order of work, the necessary materials

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:43

It is highly not recommended to carry out independent work: experience and knowledge of technical nuances are important and necessary, so you should entrust this issue to a highly qualified specialist. The peculiarity of painting the rear bumper is the need to purchase special tools, equipment, and match the color to match the car.

A little about tools

For a successful rear bumper painting result, there should be no problems with the tools. It’s good when a primer-primer for plastic elements is at hand, if necessary, to fix an old bumper. You will need putty, a grinder. In some situations, you can avoid the use of an airbrush, sometimes it is necessary. You can use spray cans with not too stringent requirements for the result. Given the purchase of the necessary equipment and the decision to transform the bumper yourself, it is useful to learn some secrets used by auto mechanics in workshops.

Detailsusing some tools

What masters use:

1. After each sanding step in the rear bumper painting, you will need a degreaser. It is best to buy an option suitable for working with plastic surfaces. Napkins will also come in handy.
2. Primer is a necessary assistant in enhancing film adhesion.
3. Sandpaper wipes surfaces - this is an important procedure before priming.
4. It is better to buy a gun from a reliable seller, from a trusted manufacturer and set it up correctly. Lacquer completes the standard set of tools and supplies.

Spray paint is usually used only to update certain areas. When deciding to paint the entire bumper, use an airbrush. Do not neglect the safety rules, you must wear protective masks for the nose and eyes.

Rear bumper painting quick tutorial

First, it is worth considering the scope of work, determining the condition of the machine - the old unit or the new one needs to be painted. For a professional, painting the rear bumper of a Toyota or another foreign car will not be difficult. The amateur will have to sweat a lot. It is necessary to recognize in which places repair is required, if necessary, carry out it, and only then proceed to work. The main condition is a cleanly washed coating, you will also have to “run over” with a degreaser. What are the next steps:

• P800 sanding material is taken. His mission is to eliminate everything to the smallest particle of dirt, minor flaws. A degreaser will help remove grease from oil stains.
• Further, painting the rear bumper of a Kia or another car involves applying a two-component acrylic-based primer. It is necessary to prime with the imposition of at least 2 layers. You should wait for each of them to dry to obtain a coating with hints of haze. Beginners in this business are advised to purchase ready-made soil so as not to suffer with the calculation of the correct proportions when diluting the product.
• The subsequent grouting, more precisely in the slang of experts "washing", is done with P800 sandpaper or marked P500. Why do they do it? The trick is this - the method allows you to better attach the main layer of paint and varnish to the plastic. You can, without washing, dry grout, blow off the dust obtained in the process.
• You will need air blowing, and only after that the base coat is applied.
• Apply a layer of paint, leave for 15 minutes. After this time, continue working.
• No defects? Further painting of the Solaris rear bumper or another brand is in the final stage: it should be varnished.

What should a hairdresser know about room requirements?

All work on painting the rear bumper of a Nissan, another type of transport, is carried out in a clean, dry room, where the likelihood of drafts is reduced to zero. When working in a dusty room, there is a high risk of spoiling the case, and the need for polishing increases.

The nuances of the colorful "reboot" of the oldbumpers

Older parts require a more gentle, thoughtful approach, which consists in eliminating defects in plastic. We are talking about possible soldering and the use of putties. What it's all about:

• The part is thoroughly washed. Then the sandpaper peels off the layer of the old paint to the ground coat.
• The specialist will then blow out with compressed air. Anti-silicone treatment in progress.
• Putty comes into play to eliminate roughness.
• After drying the putty layer, grout it, similarly to the construction industry. Servicemen recommend using P180 sandpaper. The process is completed by a finishing putty, followed by rubbing with the P220 sanding tool in order to achieve an optimally even surface. Purge, degreaser action - necessary manipulations.

When priming in the case of painting the Rio rear bumper, other restyling, the process should be carried out on all parts of the part, including areas with and without putty. Next, you need to start matting with an assistant-skin and degreasing. Finally, the hands reach the staining. What do the masters recommend?

Simple and effective tips from the pros

Adhering to simple rules, the car owner will receive high-quality coverage:

• The car must be squeaky clean.
• Degreasing is best using wet and drynapkins.
• Hatchbacks, Asian-made sedans require more thorough grouting, priming.
• It is not necessary to dry the paint, using a hair dryer, dryers.
• Acrylic lacquer loves to work with it strictly according to the manufacturer's instructions, without missing important points.

Streaks, shagreens are easily sanded when wet with a moisture-resistant skin. The polish will help to properly process the bumper part. The process requires care, careful handling of paint.

A few words to the afterword

Independently giving the “swallow” an updated look is, in fact, a simple task. It does not hurt the owner to take the advice of specialists, experienced motorists who have carried out such procedures. Attentiveness, observance of technological subtleties, knowledge of the properties of paint and varnish compositions will not interfere in this matter. Professional services will do a better job of this delicate work, although you have to pay for it. Efficiency, strict adherence to the rules for applying various means, deep knowledge, daily experience, qualifications will help to avoid annoying mistakes. They will select the best option for painting the rear bumper, to create an inconspicuous, no different from the "native" coating. The car will again shine with the brilliance of luxurious style, standing out from the car stream with an interesting image. Hiding damage is now easy.