All-terrain vehicle "Taiga": specifications, photos and reviews

Table of contents:

All-terrain vehicle "Taiga": specifications, photos and reviews
All-terrain vehicle "Taiga": specifications, photos and reviews
Anonim

The domestic all-terrain vehicle "Taiga" of the TM-3 GR series is a cross-country amphibious vehicle focused on the transportation of various cargoes, as well as the installation of various equipment on the platform part, covered with awning protection. Parts of the control of turns and general travel - automotive configuration. The equipment is equipped with a six-seater saloon, inside you can organize two full-fledged sleeping bags. The machine is designed for operation on soils with low bearing characteristics (snow, sand, wetlands, etc.). Consider the features, modifications and characteristics of these SUVs.

Caterpillar all-terrain vehicle "Taiga"
Caterpillar all-terrain vehicle "Taiga"

Taiga tracked all-terrain vehicles

The specified equipment in the standard version is completed as follows:

  • automotive controls, including power steering or lever controller;
  • wide open joint tracks with 76 cm wide elastic inserts;
  • At the request of the customer, the snow and swamp vehicle can be equipped with tracks with a joint made of a mixture of rubber and metal oranalogue of open type without extensions (39 cm);
  • asph alt-friendly tracks with polymer shoes;
  • main engine - 4.5 liter Cummins turbine diesel engine, 185 horsepower;
  • cargo traveling devices with a load capacity of 250 or 900 kg;
  • crane-type manipulator capable of lifting 0.9 tons of cargo.

It is worth noting that, if necessary, equipment can be transported over long distances on MAZ or KamAZ tractors.

Technical parameters

The all-terrain vehicle Taiga on tracks in the standard version has the following characteristics:

  • curb weight - 6.53 tons;
  • load capacity - 3.0 t;
  • number of seats - 6;
  • towed hitch weight limit - 2.0 t;
  • speed threshold (on land/water) - 50/5 km/h;
  • fuel tank capacity - 400 liters;
  • wheelbase/track - 3, 6/2, 18 m;
  • clearance - 40 cm;
  • turning radius at a minimum - 2200 mm;
  • permissible roll to the sides - 25 degrees;
  • length/width/height - 6, 48/2, 94/2, 6 m.
Cabin of the all-terrain vehicle "Taiga"
Cabin of the all-terrain vehicle "Taiga"

All-terrain vehicle Karakat "Taiga"

This unit is made according to the "Fracture" design scheme. Its tactical and technical parameters are given below:

  • length/width/height - 3, 1/1, 85/1.5 m;
  • road gauge - 1.43 m;
  • wheelbase - 1.82 m;
  • road clearance - 48 cm;
  • weight - 0.5 t;
  • power unit type - MTR 192FD-W four-stroke engine;
  • working volume - 439 cu. see;
  • power parameter - 16 HP c;
  • number of cylinders - one;
  • piston travel - 66mm;
  • variety of fuel - gasoline AI-92;
  • start - manual and electric start;
  • transmission - upgraded Safari variator or twin pulley;
  • Checkpoint - a classic scheme with four operating modes;
  • clutch type - car rims;
  • brake system - disc hydraulics;
  • carrying capacity of all-terrain vehicle "Taiga" 4x4 - 0.3 t;
  • landing spots - one;
  • maximum speed on land/water - 25/5 km/h;
  • Fuel tank volume - 6 l.

The package includes a standard seat, LED headlights, engine and hood trim, front fenders, seating in the body.

All-terrain vehicle "Taiga" 4x4
All-terrain vehicle "Taiga" 4x4

Features

Small-sized all-terrain vehicles "Taiga" are equipped with frame parts that reinforce the structure, guaranteeing high accuracy of connecting elements. The steering knuckle from Ulyanovsk manufacturers is strengthened by additional processing, aggregates with thicker rollers and reinforced hub bearings.

The chain transmission is protected from mechanical impact and accidental shock, the disc brake also migrated to the design from UAZ. Separately, it is worth noting the improved shaft block with an elastic coupling and a self-locking radial thrust bearing. Thanks toaccessibility and collapsible scheme of the main components, the machine shows high maintainability. The steering cam has a CV joint, which has increased wear resistance and an increased angle of rotation.

The wing bracket of the all-terrain vehicle "Taiga" does not have a protrusion; bolts with rounded heads act as clamps. Another structural reinforcement is the tie rod support, made of a special wear-resistant material (caporlon). The steering block itself is made of a solid bar with reinforcement in the form of scarves.

The wings of the car do not protrude beyond the wheels, respectively, do not cling to bushes and other vegetation. On request, you can additionally install mudguards. From the motor to the gearbox, the action is transmitted using three-strand pulleys, and the belt tension is adjusted by shifting the power unit through special elements. The design of the equipment in question allows you to mount motors with power from 9 to 24 horsepower. It is allowed to install a bumper, a reinforced battery and a rubber hood fixing strap.

Floating all-terrain vehicle "Taiga" 4x4
Floating all-terrain vehicle "Taiga" 4x4

Operation

The power reserve of the all-terrain vehicle "Taiga" in terms of fuel with a full refueling of 400 liters on the highway is 800 km. It is possible to install additional fuel tanks, if necessary. Actual fuel consumption varies between 50-100 liters per 100 kilometers, depending on the load and type of coverage.

Technique is focused on use in conditionsSiberia and the Far North, on soils with low bearing capacity. The unit easily overcomes water obstacles up to 1.2 meters deep. More serious obstacles are forced by the car by swimming. In the caterpillar version, the snow and swamp vehicle is designed for garage-free storage and operation in the temperature range from -45 to +40 ° C (at a maximum altitude of up to 4.5 kilometers above sea level). On the equipment in question, as standard, caterpillars are mounted from metal tracks made by one-piece stamping, having a width of 39 centimeters. The average specific pressure on the soil is 0.3 kg/sq. see

Description of the all-terrain vehicle "Taiga"
Description of the all-terrain vehicle "Taiga"

Registration nuances

The all-terrain vehicle TTM type "Taiga" on caterpillar tracks is produced in accordance with the standards of GOST R-50943-2011 and the requirements of the technical regulation concerning the safety of operation of machinery and equipment. In Russia, a caterpillar snow and swamp vehicle of the specified brand is subject to registration with the state technical supervision bodies of the constituent entities of the Russian Federation. To legally drive this type of machine, you need a category "E" license (tractor driver).

Recommended: