2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Many cars have conventional foglights, but now there is a linded headlight on sale. Such head light optics is quite effective. And little is known about fog lights. After all, from the factory it is installed only on expensive cars.
Lined PTF
Since the current legislation does not directly prohibit the installation of xenon optics, many motorists choose this type of lighting for themselves. Lenses for xenon in this case are the most optimal. They make it possible to make the most of the xenon light source. In practice, a lensed fog lamp provides a brighter light. With the right choice and installation, such optics will not cause inconvenience to oncoming drivers.
Installation of lenses is a guarantee of the most comfortable and safe movement due to a more correct formation of the light beam. Lenses can also make any car look more impressive.
The popularity of lenses for PTF is also easily explained by the versatilityand other significant advantages compared to regular light sources. These advantages are especially noticeable when the lint headlight is installed on right-hand drive vehicles, American cars - they all do not have a particularly bright regular light. Also, lenses in PTF are installed on all other cars with not very successful optics. These include domestic cars.
Advantages of installing lined PTFs
Mounting lenses in fog lights provides more correct focusing of the light beam. Even if the visibility is poor, the use of lenses will illuminate the road surface more brightly and efficiently. This allows the driver to see obstacles on the road ahead of time. Additionally, the motorist receives the following benefits.
Lined headlight has a longer service life than standard halogen products. Often, even the most expensive lamp of this type has a service life of no more than three years.
The second major advantage is the effective lighting of the roadway. Xenon and bi-xenon light sources have higher power. And due to the lenses, the stream of light is much better focused.
Lined fog lights are more economical due to low voltage consumption when properly installed. If the connection is made correctly, then the on-board network and the generator unit will work more stable in the car.
With proper installation, the car owner will never encounter heating of the optics inwork process. If condensation or moisture gets on the xenon lamp, it will not damage it.
And finally, the fog lamps on the Priore or any other car look more aesthetically pleasing than traditional PTFs. And the lighting effect is even better than the main optics.
Lined PTFs and application features
All of these benefits will be especially important for right-hand drive cars - these are often Japanese and British-made cars. For such models, PTF with lenses is a great way to improve lighting for the right steering wheel in the European version without the need to replace optics.
As already noted, lint-lined fog lights are perfect for American cars. The owners of such cars know that the light in these cars is bad. This causes some discomfort and trouble.
Also, lenses in PTF are shown to machines where the manufacturer installed regularly unsuccessful lighting devices. There are a lot of such cars - in particular, VAZ cars. Bixenon in this case will help bring the light closer to the driver's expectations.
Installed xenon in linzovannaya headlights will be able to appreciate the owners of cars with a dimmed or failed reflector in the headlight. Such optics are no longer able to properly focus the flow of light. When installing lenses, the reflector will only be used as a base for mounting.
The principle of operation of lined PTFs
In short, the module is a lighting fixture that consistsfrom the housing, a xenon lamp, as well as a special retainer lens. In addition, the design has a reflector and a special metal curtain.
The latter is designed to cut off the excess flow of light and open it if necessary. When the curtain removes excess light, it completely eliminates the risk of dazzling oncoming drivers.
Lined headlights on the Lacetti and other car models fully guarantee optimal focusing of the xenon light beam. PTF provides the most accurate distribution of the light beam in any lighting mode.
How to choose lenses in PTF
First of all, special attention should be paid to the body. It must be reliable and as durable as possible. It is also good if the headlight housing is resistant to high temperatures and aerodynamic. Resistance to high heat determines the reliability of the operation of fog lamps under various differences.
It is also important to assess the financial possibilities and familiarize yourself with the cost of this equipment. It should be remembered that a good quality linded headlight, installed on the Ford Focus 2, should be expensive. Now the price of such lighting devices is one of the important factors, since frankly low-quality and Chinese products can be found on sale in stores and car markets. The latter have a very low resource, which means that it is better to refuse to purchase such fog lights.
About fakes
Modern automotive lighting marketfull of fakes. Sometimes, instead of xenon, they try to sell the consumer an ordinary incandescent lamp, painted blue. As you might guess, such lensed headlights on the Solaris are nothing more than a parody, and not a xenon light source. Often the price of such a fake is very low. Therefore, before buying, you should always compare the price of optics with its technical characteristics.
It should also be remembered that xenon fog lights are not a replacement for standard optics. Installing PTF instead of fluorescent lights is at least illegal. Therefore, you should be prepared for the risk of getting a fine.
Pro Tips
Don't install xenon lamps using the simple replacement method. This can not only cause them to burn out, but also cause malfunctions in the vehicle's on-board network. It should be borne in mind that if you want to install lensed headlights (Kia Rio is no exception), you must also install ignition units.
Professionals recommend using special washers with such optics. This light is very sensitive to impurities that accumulate on the surface of the lamp. Even slight dirt can significantly affect the performance of the light output.
The headlight in which xenon or bi-xenon is installed must first be adapted for the installation of such a light source. Reflectors and reflectors are mounted such that they correspond to xenon. In general, xenon can only be used withlenses. Also, it will not be superfluous to install an automatic lighting corrector.
Conclusion
Practice shows that unprofessional installation can lead to too bright or, conversely, too dim light. Therefore, it is better to entrust the installation to professionals. Also a good and competent approach is the installation of standard optics from more expensive trim levels. You can use an analogue in terms of brightness and efficiency - LED linded headlights.
Recommended:
Fog lights: features and benefits
Advantages of LED fog lights, features and rules for their installation on a car. The difference between fog lights and conventional LED daytime running lights
How to put LEDs in fog lights with your own hands
What kind of car enthusiast can refuse to tune his car? Such a measure is not always welcome among specialists, since there are certain risks of ruining everything. However, putting LEDs in foglights is the kind of tuning that, if implemented correctly, will be a profitable option
Fog lights on the "Gazelle": overview, types, connection diagram and reviews
Fog lights on the "Gazelle" are installed not for beauty, but from the need to improve visibility on the road during fog or rain and snow. However, some models are not supplied with them by the manufacturer. About how to choose, install and connect the headlights yourself, and will be discussed below
Fog rear lights: types, brands, how to turn on, relays, replacement and expert advice
Bad weather is not a reason to refuse to use a car; rather, on rainy days, car users move in this way. When using conventional lighting fixtures, movement is limited in speed. This problem is solved by using fog taillights. A distinctive feature of this device from conventional lighting is a horizontal wide beam of light emitted by a lamp with a diffuser and a reflector
Xenon: allowed or not? Is it possible to put xenon in fog lights?
Relatively recently, xenon lamps appeared on sale, and with them a lot of controversy about whether xenon is allowed in Russia and in other countries. Indeed, ten years ago, these headlights were available only to owners of expensive cars, and over time, xenon lamps began to be used for beauty
