Heated rear seats: installation instructions

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Winters in our country can be very cold. It can get very cold in the car. Even the included stove does not save. Expensive brands of cars for this reason are produced with heated seats. Budget models do not have such a function. However, owners of such vehicles can install the system themselves.

Most often, heating is provided only on the front seats. For passengers behind the driver, riding in a car in cold weather can be uncomfortable. Therefore, there are many systems that can be used to heat the rear seats. They are easy to install yourself.

Varieties

A passenger car, jeep or crossover with heated rear seats can be found quite often today. At the same time, owners of such vehicles can choose different options for electrical systems. Heating wires run inside such products.

The speci alty car market includes covers, heated covers, and embedded systems. The first two types of products are characterized by low cost and ease of use.installation. However, these varieties are not without certain disadvantages.

Many drivers prefer to install embedded systems. Their installation is more complicated. However, almost everyone can do it on their own. In auto repair shops, such a procedure will be quite expensive. With all the complexity of installing heating wires under the surface of the seat cover, this option is one of the most preferred.

Heating type selection

Heated covers and capes are quite inexpensive. You can buy similar products at a price of 500 rubles. However, you should immediately understand a few nuances associated with their operation.

First of all, experts say that the quality of such capes is predominantly inferior to built-in wires. In this case, the heating of this product may not meet the established standards. Some manufacturers create seat covers that heat up to 40°C. This negatively affects the reproductive function of men.

Heating the rear seats of a car with overhead covers has another drawback. Such products are connected to the network through the cigarette lighter. He, as you know, is the only one in the car. Therefore, such a product assumes that the cover can only be used for the driver's seat. Heating of the rear seats in this case will not be possible. Using a splitter, you can expect the fuse to blow. Too much current will pass through it. Therefore, integrated systems for the rear seats are preferred.

Cost

Allcommercially available built-in systems for heated rear seats can be roughly divided into three categories. The most expensive are products made in Germany. The best known system in this category is Weaco. A set of built-in heating for 2 seats costs about 16 thousand rubles.

Domestic production has entered the mainstream category. Seat heating systems Emelya, Teplodom, Avtoterm, etc. are in the greatest demand. Such kits can be purchased at a price of about 4 thousand rubles for 2 seats.

Chinese-made products are the cheapest. Similar products can be purchased at a price of up to 3 thousand rubles. for 2 seats. There are products whose cost does not exceed 1.5 thousand rubles. per set. The quality of the presented products varies greatly. To choose a worthy option, you need to consider expert reviews.

How to choose a seat heating system?

There are many built-in heating systems on the market. They differ in quality and cost. The most expensive and high-quality electrical systems are German-made. These are universal products that can be used to heat the seats of almost any brand of car. The degree of protection of electrical wires is very high here. Failure within the stated life is unlikely.

Domestic manufacturers present many varieties of such systems on the market for special products. Emelya heated seats are in the greatest demand among buyers.

Experts say that Russian-made products are not inferior in quality to German products. But the cost of domestic systems will be an order of magnitude less.

Chinese seat heating products are the cheapest. They have a low protection class. Wires are easily damaged. They can fail in the first year of operation. This can cause the system to overheat and even cause a fire. It is not recommended to buy such systems.

Preparation for installation

When choosing the best option for an embedded system, you must carefully study the rear seat heating instructions that come with the product. The manufacturer specifies a number of mandatory requirements that the installer must fulfill.

Next, you need to inspect your car. Many modern vehicle models do not have a built-in heating system. However, manufacturers provide that the owner will want to install such a product on their own. Therefore, the machine may have all the necessary leads and wires for connection. This will make installation much easier.

Next, you need to determine the amount of materials needed to install the heating. You need to prepare a wire, adhesive tape, electrical tape, a knife, screwdrivers and scissors. It is also recommended to take pliers and glue. After that, you can start the installation.

Select button installation location

With buttonheated rear seats can turn the system power on and off. The button can be installed in a convenient place for users.

Most often, such a control is installed on the armrest of the rear seats. It is very comfortable. However, some car models do not have rear seat armrests. Therefore, the owner of the car can purchase them on their own. On sale are products in which holes have already been made for installing a button for the heating system. In a conventional armrest, you will have to make a seat yourself.

In some cases, it is more convenient for the driver to place the button on the dashboard. In this case, it will be convenient for him to independently manage the system, turning it on and off if necessary.

Wiring

Do-it-yourself rear seat heating involves wiring. The location of communications must be carefully considered. They should not interfere with passengers and the driver. Also, a large number of unseemly wires can spoil the appearance of the cabin.

Communications need to be laid so that they can be hidden under various structural elements. If they get under your feet, the wire can easily be broken. This is unsafe. Not only will the system stop working and require timely repair, but there is also the possibility of getting an electric shock.

A large number of wires in the cabin can interfere with the driver's control of the vehiclemeans. Therefore, all communications should be hidden as much as possible.

Wiring to network

Integrated heated rear seats require proper connection. Before starting this procedure, you must re-read the manufacturer's instructions. It clearly indicates how to properly connect the wires to the network.

Many drivers make a gross mistake by connecting the system to the cigarette lighter. In this case, the seat heating cannot be operated. The fuse is not designed for such a load. Therefore, it will quickly fail.

It is best to connect the wires directly to the vehicle battery. In this case, it is necessary to correctly calculate the total load, which will be determined in the system in the winter. In some cases, you will have to sacrifice some other systems in favor of heating (for example, music).

Dismantling procedure

To mount the heated rear seats, you will need to dismantle the rear seats. This is a rather laborious process. For those who have never done such an operation before, certain difficulties may arise. It is at this stage of the heating installation that usually takes a lot of time.

When the rear seats are removed from the passenger compartment, you will need to carefully remove the upholstery from them. This must be done very carefully. Otherwise, the material may be damaged. In this case, you will need to buy new seat covers.

After that, you can start installing the system. Expertsit is advised to choose such types of heating that do not turn on if no one is sitting on the chair. This allows the vehicle's electrical system to be operated more efficiently.

Installation

After carrying out all the preparatory work, you can proceed with the installation of heated rear seats. The wires will be located on the back and on the seat. In the delivery set, the manufacturer most often provides for the presence of glue or adhesive tape. With their help, you can fix the system on the surface. Some warming products have an adhesive backing. In this case, installation is even easier.

Installation of wires is carried out in a warm room. If this recommendation is neglected, it can be expected that the adhesive will not be able to provide the required adhesion of the mat to the base.

After the heating elements are firmly fixed on the surface, it is necessary to put on the upholstery on the seats. After that, the seats are again installed in the passenger compartment. You need to check the functionality of the system. When all the wires are connected, you need to turn on the heating. Experts recommend including fuses in the network. This improves the safety of system operation.

Features of operation

Heated rear seats can most often be adjusted. For this, the system has a thermostat. It turns off the electricity supply at the moment when the seat reaches the set temperature. Also, some products provide for the heating of only the backrest or only the seat. Also, the manufacturer may provide a test functionwire status. When they break, the sensor signals the driver about a malfunction.

Having considered the features of the heated rear seats, you can independently mount such a system.