What can be a malfunction of light dimensions on foreign cars

Table of contents:

What can be a malfunction of light dimensions on foreign cars
What can be a malfunction of light dimensions on foreign cars
Anonim

Car lights allow the driver to drive safely at any time of the day or night. That is why the owners of any vehicle must monitor the serviceability of lighting devices. Indeed, in accordance with the rules of the road, a vehicle that has a malfunction in the light dimensions (non-burning headlights or / and rear lights) does not have the right to move.

what could be the malfunction of the light dimensions
what could be the malfunction of the light dimensions

Role of external lights

Due to the fact that external light devices allow any vehicle to drive safely, regardless of the time of day and visibility conditions, car owners should carefully monitor their condition. When any device fails, it is important to find out what the malfunction of the light dimensions can be and how soon it can be repaired.

Exterior lighting problems

lighting fixtures
lighting fixtures

If such devices are out of order, the necessary repairs should be carried out. There may be several reasons:

- Absence of a channel of lamp filaments in the position lamps or inheadlights. What could be the malfunction of the light dimensions in this case? The reasons for this may vary. For example, a lamp filament burned out or poor contact in existing fuse sockets. There may be a short circuit or an open in the wires. Maybe the switch, switch, headlight relay, etc. has failed.

- The direction indicator or alarm is out of order. In this case, the question of what kind of malfunction of the light dimensions could be is associated with a breakdown of the turn signal breaker relay, burnout of the lamp filaments. Either the fuse contact is blown, there is a malfunction of the alarm switch, etc.

- Stop lights may not light if the lamp filaments, fuses, brake light switch fails, or a short circuit occurs.

Troubleshooting

After finding out what the malfunction of the light dimensions may be, you should begin to eliminate it. To find the problem, you need to check the corresponding fuse. Next, using a test lamp, the entire circuit is checked. To facilitate this search, you should use the electrical equipment diagram that is attached to the operating instructions. If at first the lamp is on, and then suddenly goes out, then there is either no contact in this area, or there is an open in the circuit.

Other car lights

In foreign cars, there are also various types of lighting devices. What can be a malfunction of light dimensions in foreign cars? The problem mayinclude blown fuses, defective switches, failed relays, switches, or shorted wires.

car lighting fixtures
car lighting fixtures

To determine the location of the break, you should connect a test lamp, turning off the idle device. In this case, the break will also be located in this section of the circuit, where at first the lamp shone, and at the end it suddenly went out.

Recommended: