Febest parts reviews. Spare parts for foreign cars Febest: quality, country of origin

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Unfortunately, any mechanism in a car is subject to wear and tear, and no one is immune from this. Therefore, in the event of a breakdown, motorists are looking for good quality spare parts at an affordable price. This article will review the company Febest and reviews of spare parts produced by it.

The company began its existence in 1999. Initially, it produced spare parts only for Germany. However, after a short period of time, the company began to export its products to many parts of the world. Russia was among the customers of goods from Febest.

The company is popular among motorists. However, not everyone is satisfied with the quality of the products. In reviews of Febest spare parts, buyers leave different opinions about the purchased product. This is due to many factors.

Febest: country of origin - Germany

Motorists are accustomed to the fact that Germany always produces cars and spare parts for them only of the best quality.

In most cases it is. Looking closer at Mercedesor Volkswagen, then you can understand that all cars of this brand are made with high quality, they serve for a long time without breakdowns. These manufacturers manufacture all parts with the highest precision. Companies value their reputation and popularity, because of this they produce everything in good conscience.

Country producer Febest - Germany, why then the quality of products is not always similar to German. The thing is that sometimes parts are not produced in Germany, but in China to reduce production costs. Such products cannot be called original, they are fake.

Packaging

People often order spare parts for foreign cars from Febest through various online stores. In this case, they, of course, cannot inspect the quality of the product, its packaging. They hope that if the part is made in Germany, then it is of excellent quality. However, they are upset when the package arrives. Most often, the packaging looks sad: thin cardboard, and all information about the product is not printed, but simply applied on a separate sheet and glued.

The buyer in this case thinks that he was deceived and sent, instead of the original spare parts for a foreign car, a fake. He gets even more frustrated because the quality of Chinese parts leaves much to be desired. But in the case of Febest, not everything is so bad. Chinese products are sometimes of acceptable quality, and also serve in a car device for a long period of time. But that doesn't always happen.

Why is it in demand?

Alonemotorists buy Febest parts, while others do not understand why to do it. The thing is that the company produces mainly spare parts that experience the greatest load during the operation of the car. Also, Febest is engaged in the manufacture of those elements that are produced by other enterprises, but are not sold separately, but only assembled with any element. In this case, it is not advisable for the motorist to change the entire mechanism if it is possible to get by with replacing only one of its elements. Of course, the original will be of better quality and will withstand a heavy load, but not every car owner is ready for such waste.

This is the reason the company is so popular. Most often, breakdowns occur unexpectedly, and then the motorist is simply not ready for waste on expensive spare parts. In order to somehow save their money and save up for the original, a person puts spare parts from Febest, most often as a temporary option. At the moment, the company has reached a new level and already produces spare parts for almost any car.

No other choice

Febest parts are also installed in other situations. For example, a car owner drove his vehicle from one locality to another. On the way, his CV joint fell into disrepair. It is impossible to operate a car with such a malfunction. It is possible to fix the breakdown only by installing a new axle shaft from the original manufacturer, but taking into account the cost of the spare part and the work to eliminate it, it is not at all cheap. In addition, you will have to call a tow truck, becausefor which there will also be additional financial difficulties. The ideal option would be to replace the defective element with a CV joint from Febest. In the original, this part is not sold separately.

If automakers realize that it is more profitable to manufacture and sell spare parts separately than as an assembly, then the demand for Febest will decrease significantly. Now this company is very popular due to the fact that motorists have no choice. Some of them take parts from this company and replace the original at the first opportunity. But there are those who operate a car with Febest spare parts until such time as they become unusable. Most often, owners of used cars purchase products from this company.

Spare parts for running gear

It would be wrong to say that Febest auto parts are of poor quality. The thing is that the quality is just not always good. For example, one CV joint from Febest will work without breakdowns for about 10 thousand kilometers, and the other will become unusable after 1000 kilometers. It's pretty hard to predict, but if the parts are for the running gear, then you should at least try to do it.

Febest products for "hodovka" are different. Stabilizer struts are of good quality, but their anther often becomes unusable. Silent blocks are also often of poor quality, but it also happened to some motorists that they were operated in normal condition for a long period of time. For the running gear, it is recommended to install Febest spare parts only if there is no alternatives. If it is, then it is better not to save and put better items.

Bearings

Febest also manufactures those parts that include a bearing. Timing rollers are such an element. In general, their quality is not bad, some people have been operating their car with them for quite some time. However, there was also such a thing when the rollers became unusable and created a characteristic noise almost immediately after installation. Lottery again.

If the timing belt has become unusable, then you can purchase the original to replace, the cost of which is very high. You can also buy an analogue from Febest, the quality of which is average. In all cases, the roller from Febest was operated for a different period of time. For some, it worked in normal mode for about 20 thousand kilometers, while for others it buzzed after the first thousand km. As a temporary option or for testing, the installation of rollers from Febest is suitable. However, if all timing elements are being replaced, then you should not install spare parts from this company, since their resource is much less than that of others. When the original belt is installed and the rollers are from Febest, after a certain period of time the rollers will need to be replaced, but the belt will still be in good condition.

Hub

The hub is such an element that is always under stress and works in difficult conditions. Some people have experimented with various wheel bearings from Febest. In the course of such experiments, it turned out that almost every instance could not work out more than10 thousand kilometers without breakage. There were less. There were also instances where the resource was enough for 50 thousand kilometers, but this happened extremely rarely.

After the experiments, all copies were dismantled. It immediately became clear that the balls were badly cracked, and some even burst. The bearing housing was also badly damaged. From this we can understand that the hub from this manufacturer should not be purchased. It is better to overpay for the original than to take a low-quality analogue. In addition, if the copy breaks down frequently, then replacing it will be more expensive than buying the original.

What can I consider buying?

The best quality is the CV joint from Febest. Its resource is not as large as that of the original products, but for its cost it is a good indicator. On average, cv joints cost about 1 thousand rubles.

The resource of this product is different. For some, the CV joint works for about 50 thousand km, while for others it fails almost immediately after installation.

Febest parts reviews

Motorists who have purchased Febest products often leave their opinion about it in reviews. Febest CV joints and rollers can still be installed in your cars, as their price and quality match. Wheel bearings and silent blocks should not be used, since very often they become unusable immediately after installation.

Buy or not?

Most often, people involved in the sale and purchase of cars resort to installing spare parts from this manufacturer. They can for smallmoney to repair the car for sale, which will be operated without breakdowns for another 1000 km.

Everyone should decide on the purchase of these spare parts on their own. You should not think that everything is very bad with quality, because often negative reviews about Febest spare parts do not speak about their quality, but about improper installation and breakdown because of this. It is also worth considering that when a person is satisfied with a purchase, he is in no hurry to write positive reviews about the spare part, but simply enjoys the purchase and that's it. What can not be said about the situation when the part failed, broke. In this case, as practice shows, people are more likely to write reviews.

Conclusion

Febest is definitely not Germany. However, such information is indicated almost everywhere. German parts just can't be that cheap. For the price, the product quality is acceptable. Febest parts can be used as a temporary option. It is best to install cv joints and timing rollers from this company, they have a long resource. It is better not to install hubs and silent blocks from Febest, as they fail quite quickly, almost immediately after installation.

Reviews about Febest vary greatly, there are fans of these details, and there are those who call them outright Chinese. Whether to buy more expensive spare parts or choose Febest, everyone must decide for himself. We hope you found this article helpful.