Replacing the clutch is difficult, but you need to know

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

In order to start such an occupation as replacing a clutch, it is not enough just to know the basis of work in theory. It is necessary to take into account all the subtleties and have at least the slightest skills of a mechanic. To perform this type of work, special tools will be required. It is worth noting that the replacement of the clutch in different types of cars is different.

Before starting work, you need to familiarize yourself with the mechanism itself, and then proceed with the actions. Replacing the clutch on a front-wheel drive car is much more difficult than on a rear-wheel drive car. The first thing to do is to purchase a new spare part and a good jack. The best way to raise the machine is to use a hoist as the entire transmission will have to be removed.

Before starting work, you need to make sure that it is the clutch that has ceased to function. To check, you must press the pedal, while the part should open, which will make it easy to shift gears. If it appearsa characteristic creak, this is a clear sign that the clutch needs to be replaced. The cables, the driven disc, the pedal itself and the drive shaft are also checked, as often the problem is in them.

As mentioned earlier, each car has its own nuances in this type of work. So, for example, replacing a VAZ clutch is significantly different from a similar process on jeeps, so before working, carefully read the instructions that are provided specifically for your car brand.

The first thing to do is turn off the hydraulic cylinder and battery. Next, the car is raised with a jack or placed on a stand. Use a container that can drain fluid from the transmission and place it under the part. There are electrical wires on the mechanism, which must also be disconnected. If the hydraulic driven disc is outside this part, it is also disabled. The starter is also removed, after which the bolts on the clutch bell are unscrewed, and the transmission is removed.

The next step is to install the engine on the jack. To do this, you need to bring it under the crankcase and install it. After this work is done, you will see the clutch itself. To remove it, unscrew the flywheel. Replacing the clutch also involves checking the parts adjacent to it, as well as the engine, which can leak oil. If any parts are worn out, they must be replaced. It may also be necessary to replace the mainclutch cylinder, which is made by unscrewing it and installing a new one.

After the installation of the new clutch is completed, it is necessary to put the rest of the parts in reverse order. The subsequent operation of the car depends on this process. If something goes wrong, the machine will start to malfunction.

After the work done, you need to check the fluid level in the gearbox. If it is less than the norm, then bring it to the required level. Next, it is worth driving a short distance and checking the operation of the clutch.