Febest parts review. Quality auto parts

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

In 1999, the history of a large company Febest began. It originated in Germany and initially produced spare parts only for its country. After the company began exporting to other countries, its level increased. Spare parts are also supplied to Russia. What do motorists say about them?

Reviews about Febest spare parts come across various, a lot of them are negative. This makes me question the quality of the product. This article will take a closer look at the company.

Quality spare parts from Germany

It so happened that parts made in Germany are considered the standard of quality. They are made of high-quality materials on high-tech equipment, because each manufacturer values the reputation of his company. You can verify this by getting acquainted with the largest car manufacturers in Germany: Mercedes-Benz, Wolkswagen and BMW. The quality of cars of these brands is almost the best. Take at least spare parts "Mercedes". Every detail is taken care of during their production. However, Febest is also a German company. Why, then, in the reviews aboutcompanies so much negativity?

The main reason is not real products. The fact is that Febest spare parts are often counterfeited. The production of such products takes place in China, where the quality of workmanship and assembly is much lower than that of the original.

Packaging quality

Many motorists are accustomed to ordering spare parts over the Internet to simplify the procedure. However, when buying a Febest engine mount or other products from this company, customers are most often disappointed upon receipt. Most of all, they are surprised by the quality of the packaging: thin cardboard and a glued hologram instead of a printed one.

Almost immediately it becomes clear that the package that has arrived is a fake. However, this does not mean that the purchased spare part will immediately fail. It will be serviceable, but it can no longer be compared with the quality of the original Febest products. The same story can be with Mercedes spare parts.

Why choose this company?

Why are Febest parts so popular? This question is of interest to many car owners who prefer to install only original parts. The reason for this popularity is the approach of the company. Basically, it produces spare parts that, in the case of the original, are sold only as an assembly, or elements that are under constant load. Of course, the quality of the original products will be higher, and therefore, the resource will also be longer. However, overpay and buy the entire assembly when only a small part of it is needed (for example, ballFebest), not everyone wants it. The company quickly realized that no one produces such spare parts, and decided to fill this niche. The cost of such items is much lower than the original.

In other words, the company takes advantage of the fact that the manufacturer does not supply individual elements of any unit (for example, the Febest lever on the Ford Focus 2), but only sells the complete assembly, which is very expensive. Thanks to this, you can save a lot on spare parts.

Before, Febest specialized in the production of spare parts only for Korean and Chinese cars. However, at the moment, the company has increased its capabilities, and now it can find spare parts for almost any car model.

Low cost and no choice

In Russia, the company has gained immense popularity. The cost of spare parts from the company is quite low. Why else is Febest so popular? For example, a person was driving his Ford car, and at that time his CV joint failed. In this situation, there are few options. The best one is to buy Ford parts from Febest. This is much better than calling a tow truck and paying for its services. And then also look for original spare parts for repair. However, most often, CV joints are not supplied separately, but only assembled with a half shaft, the cost of which is extremely high. In this case, Febest will help, as they have various spare parts for sale, both assembled and individually.

The popularity of a company is likely to fall only ifif original spare parts are sold separately, and not as a set. Febest also wins in the cost of products, which is why it is gaining popularity among motorists. However, the quality of spare parts leaves much to be desired. Some car owners purchase Febest products due to insufficient funds, in which case they do not complain about the quality. It is worth noting that the company is quite popular, despite the small resource of its products.

Spare parts for running gear

Still, the quality of spare parts from Febest cannot be said to be poor. Rather, it is unstable. There were cases when two completely different parts served differently: one failed almost immediately, and the second worked for about 50 thousand kilometers, and nothing catastrophic happened to it. In other words, buying parts from Febest is a lottery. It is not known when you are lucky and when you are not. But you will have to pay more for mistakes.

Febest dust boots on stabilizer struts most often become unusable. You can verify this by reading the reviews. With regards to silent blocks, it is difficult to answer exactly, because this is the same lottery. Most often, they come into a faulty state rather quickly, but as an exception, it also happens that they serve for a long time. If we talk about all spare parts, the rating, which is composed of reviews, is 3 out of 10 points. Of course, spare parts from this company can be installed in the absence of other options or opportunities. However, if there is a certain amount in stock, then it is better to look at spare parts from other companies.

Febest bearing life

The company is also engaged in the production of timing components. Basically, these are leading and parasitic rollers. The build quality of these products is quite good. At least better than those made of rubber and metal. It is not uncommon for Febest rollers to start whistling immediately after installation. Thus, it can be understood that their resource is small.

However, due to the low price and availability in stores, the products are popular. Most often, Febest rollers are installed due to the lack of an alternative. For example, the timing roller failed on the road. Moving on is impossible, but you need to go. In such a situation, you can purchase a Febest roller at a low price and install it yourself, or contact a car service for help. This element cannot be considered permanent, but only a temporary solution. However, there is a nuance. If the entire timing is replaced and Febest rollers are installed, then the savings will not be noticeable. The timing should be replaced every 70 thousand kilometers, however, Febest rollers have a small resource, so they will become unusable after 20 thousand kilometers. And in this case, it will be necessary to replace the entire timing mechanism. And then there will be no savings, but costs will only increase. So do not install parts from Febest for a long period of time. Please take this into consideration.

Febest hubs

Next moment. The loaded node of the running gear of the car is the hub. The wheel bearing is always loaded and stronglywarms up. When checking the quality of this element, it turned out that the Febest wheel bearing has a resource of about 10 thousand kilometers. However, there were cases when this element did not fail even after 40 thousand kilometers, but this happened quite rarely.

After testing, the spare part was dismantled. It turned out that the balls were worn out and the bearing housing was damaged from the inside. From this it can be understood that the development of the element was incorrect, since the landing site is very small. It also happened that the balls just burst. You should not save on a wheel bearing, but it is better to immediately purchase the original. Of course, it will cost more, but the resource of such an element is much larger - at least 100 thousand kilometers. While the hub from Febest has a much shorter service life. Only 10 thousand kilometers. Installing the original will cost less, as there will be no need to constantly replace the element.

What is the best buy?

The company also produces quality products. Shrus belongs to them. It's made pretty well. About this element you can find the minimum number of negative reviews. It is also worth noting that the cost of the CV joint is quite small. On average, the price for one unit of this element is about 1 thousand rubles. The CV joint can cost more, it all depends on the model of the car. This spare part has a smaller resource than the original. However, due to the low cost and good build quality, Febest cv joints are popular.

Like everyone elsemanufacturers, Febest has defective products, only a little more often. There were cases when the CV joint worked no more than 1 thousand kilometers, and then fell into disrepair. It is almost impossible to determine initially which product is of high quality and which is not. In one of the sources there was information that another fake Febest had begun to be made in China. According to car owners, such products are of better quality than early fakes. However, there is no confirmation of this yet.

Febest parts reviews

Next. At the beginning of the article, it was said that often buyers of Febest spare parts leave negative feedback about the quality of products and about the company as a whole. As it turned out, the products are far from being manufactured in Germany, there is not even a company factory there. All spare parts are made in Korea and China, in particular Ford spare parts. Higher quality products are made in Korea, but there is often a defect there.

The best quality products are cv joints and timing rollers. Silent blocks and hubs are made the worst. You don't need to install them. Although there are also wheel bearings, the resource of which is huge.

Buy or not?

According to reviews, Febest parts are purchased by resellers. For them, this is very beneficial, as the products are inexpensive. For the first time after installation, the spare parts will work properly, but after the sale of the car, the entire chassis may become unusable. However, resellers are the least worried about this.

True, recently the quality of products from this manufacturerimproved significantly. Therefore, you can still purchase some parts.

Negative reviews of Febest spare parts do not always indicate that the quality of products is at a low level. It also happens that something was mixed up during installation, and the element began to work incorrectly. In this case, a breakdown is inevitable.

Conclusion

As it turned out, Febest parts are definitely not made in Germany. This can be seen by looking at the cost of production. Because of this, you should not count on a huge resource of products.

In some cases, spare parts from this manufacturer really help out. When you urgently need to replace a defective element, but there is not enough money for the original, you can purchase Febest spare parts. However, they will soon need to be replaced with the original element.

Febest parts reviews speak for themselves. And before you buy the products of this company, you need to read what buyers say about it, and think 100 times. The cost of such products, of course, captivates, it is an order of magnitude lower than the cost of other brands, as is the quality. Before installation, it is best to consult with a specialist. We hope that this review will help you make the right choice, and your vehicle will serve you for a long time.