How to polish car glass and headlights? Answers here

How to polish car glass and headlights? Answers here
How to polish car glass and headlights? Answers here
Anonim

Every driver wants his “iron horse” or “beloved baby”, in the sense of a car, to look his best. A sparkling body, bright eyes-headlights, brand new windows and wheels - beauty, whatever you say. However, alas, tires wear out over time, headlights become cloudy, and small road stones do their “dirty” work. We have to think about how to polish the glass, because a good owner of a car should always have a respectable appearance, and there is no place for scratches.

How to polish glass
How to polish glass

You can solve this problem by contacting the workshop. The services of a professional and good equipment will certainly lead to the desired result, however, it will not be cheap. Minor scratches and wiper marks can be de alt with on your own. And then the question arises of how to polish the glass.

In our world, everything is simple, and for almost all consumer requests, modern manufacturers alreadygave their answer in the form of a finished product. You can buy polishing powder in specialized stores, and as equipment you can use a conventional drill equipped with a special nozzle. A grinder or grinder will not work in this case, since glass can be polished only at fairly low speeds (1200-1700).

Preparatory work is required. This is a thorough cleaning (ordinary glass liquid is suitable) and the obligatory stroke of the damaged areas with a marker, and the marks are made from the inside. Do not forget to cover the car itself with a protective film, and glue its edges around the windshield with tape so that liquid and splashes do not get where they should not. By the way, it would be useful to take care of protecting yourself and the walls of the garage from unnecessary pollution.

How to polish glass
How to polish glass

Now directly about how to polish the glass. Powder, approximately 80-150 g, is diluted with plain water until a creamy consistency is obtained. If a drill is used during work, a special mandrel with Velcro is attached to it, and then a felt circle is applied to its surface. In the process, you may also need napkins and a bottle of water equipped with a sprinkler. A little of the prepared mixture is applied to the felt wheel and rubbed on the glass without turning on the polishing equipment. Then, carefully, without excessive pressure, at a slight angle, move the operating device within the required area (it is better if it is small -25 X 25 cm). The main thing is not to let the polish dry, and for this you need to constantlyspray the surface of the glass with water. At the end, the treated area is wiped with a napkin to make sure that the defect has disappeared. If necessary, the process is continued.

Important!!! Before polishing glass that has significant chips, repair it. Otherwise, getting rid of small abrasions, you risk getting a big crack.

How to polish headlight glass
How to polish headlight glass

Road lighting is one of the most important factors for safe driving. Headlights of adequate brightness are of particular importance, and yellowness, dirt and other defects interfere with normal operation. How to polish headlight glass? Approximately in the same way as the windshield. The only difference is that, if desired, the headlight itself can be removed so as not to think about protecting the body. For the best effect, initial treatment with sandpaper is recommended, and then with a polishing compound. Some especially economical motorists use toothpaste instead of a special powder, and claim to be satisfied with the result. The choice is yours.

Recommended: