Do-it-yourself alarm connection - basic installation rules

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

When buying a car, a motorist is faced with the problem of how to protect his iron horse from theft. To help developers and manufacturers of anti-theft products offer a huge number of their developments. But their diversity will bring down

the sense of anyone, and it is difficult to make a choice on your own even for an experienced motorist, and even more so to connect the alarm with your own hands. For these purposes, the best way out is to contact a professional or a specialized company that will give you some advice on which car alarm is best suited for your car, install it and connect it in your car, since the safety of your car directly depends on the correct choice and installation. machine.

But if you, due to some circumstances (consider yourself experienced enough for this purpose, a desire to save money, the absence of a specialist, or you think that connecting an alarm is not so difficult) decide to install an anti-theft system with your own hands, then you should adhere to the following rules:

1. One of the main conditions is the place where the anti-theft system is located.



There are time-tested options, but they have long been known to hijackers, so try to install it in unexpected places. For example, there are cars that have internal plastic fender covers, under which the siren hides. A place under the battery installation plate is also a good option. Do not place or connect the alarm near the stove, air conditioner, receiver and moving parts of the car.

2. Protecting the alarm unit from impacts, wrap it with foam. Create problems for a potential hijacker by using a large number of cable holders and tape when attaching an anti-theft device, he will lose a lot of time to remove them.
3. When connecting the alarm, carefully read the instructions and follow their instructions. Due to the different design features of different car brands and anti-theft devices, installation steps may vary greatly.
4. After installing the car alarm, install the control module, remembering that it should be as little as possible accessible to the hijacker, and therefore, when choosing a place to place it, take it seriously.
5. Also be careful about the location of the switches, both auxiliary and system, placing them in the most unexpected place that can puzzle the hijacker.



6. Another vulnerable point of the alarm is different parts of the wiring, especially the ignition and starter wiring. So don't jointhese wires close to the ignition switch. Try to disguise the connections by tying them to the cable harness, which again will help to buy time when trying to steal your car.
7. When choosing places to install parts of an anti-theft device, remember that they are sensitive to moisture and mechanical shock, so take all measures to protect your car alarm from their effects.

Installing anti-theft systems is a rather complicated process, but doable with the right approach to this work. By carefully considering the installation locations and masking of the parts of this device, you can protect your car from theft.