The VAZ-2110 power window button does not work

Table of contents:

The VAZ-2110 power window button does not work
The VAZ-2110 power window button does not work
Anonim
windows vaz
windows vaz

If the power window button on the car stopped working, then driving this vehicle can turn into a nightmare. An open window in the winter cold or closed in the summer heat is clearly a dubious pleasure. But you can fix it yourself.

All windows on the VAZ-2110 are controlled by a group of buttons located next to the parking brake lever. This is inconvenient both while driving and for diagnosing a malfunction. Therefore, the first step is to narrow the search circle. To do this, you should conduct a small test and check the operation of all four buttons. Based on the results of such diagnostics, troubleshooting methods will be selected.

If all the VAZ-2110 windows do not work

  1. Start with the simplest. In the mounting block, which is located under the steering wheel of the car, you need to find the fuse number F5, located in the top row, fifth in a row from the left. He is responsible for the operation of the electric window motors. Its rating is 30 A. It is necessary to check that it is installedrequired fuse and that it is intact. If it is not, then it must be replaced. After that, you can check the operation of the power windows.
  2. power window button
    power window button
  3. If the fuse is OK, then the fault most likely lies in the wiring defect from the mounting block to the power window buttons. To do this, ring all cables.
  4. The next option for failure in the operation of all power windows of the car may be the failure of all buttons. While unlikely, the best way to test this is by swapping the entire button block with a known-good one.
  5. The last option, no matter how banal it may seem, but you can also check it. It must be remembered that the electric window motors in the VAZ-2110 are activated only when the ignition key is inserted and turned to the first position.

If one power window button does not work

  1. Begin again with the simplest things. It is necessary to extract the entire group of buttons. Next, you should once again check the performance of each of them and remember those that function normally. This is needed in order to run the test. The next step is to remove the block of wires from the non-working and any working mechanisms. The wires from the working button must be connected to the one being tested.
  2. windows on vaz
    windows on vaz

    After that, we check its work by pressing. If the glass does not respond to manipulation in any way, then the power window button is faulty. It should be replaced.

  3. If previousthe test showed that the power window button works, the next step is to check the wiring. To do this, you need a car tester-probe. Using it, it is necessary to check all the cables, and then visually assess their condition. You should also inspect all contacts and connections for integrity, dirt, oxidation or other damage.
  4. If none of the above two methods helped, then this means only one thing - the power window motor is not working. In this case, it should be replaced.

Recommended: