How to install xenon headlights in a car?

Table of contents:

How to install xenon headlights in a car?
How to install xenon headlights in a car?
Anonim

Xenon headlights are one of the main inventions of mankind in the automotive field. Due to their special design, they provide the most efficient illumination of the roadway at night. In general, installing xenon in car headlights requires certain knowledge and skills, so it is best to entrust this work to professionals. However, if you are confident in your abilities or at least understand this area, you can do all the work yourself. Today we will find out how to install xenon on a VAZ-2110.

how to install xenon
how to install xenon

Dismantling the optics

First you need to remove the headlights in which you plan to install xenon. To do this, disconnect the battery from the power supply and find the nuts that secure the headlight unit to the car. Near the head optics on the back side you will see bolts and two clamps. After unscrewing the first, press downthe second piece down as far as possible. Next, we take out the headlight from the mounts, after removing all the wires from it. To do this, we need a small minus screwdriver. Using it, we disconnect the large terminal - insert the part into the wire and carefully put the slot on the terminal on the edge of the handle. If you hear a short click, know that this part has detached from the fasteners.

Disassemble headlight

Understanding how to install xenon, we need to remove the glass protection on the headlight unit. This is done very easily. On the back side of the structure, two latches are hooked (as a rule, they consist of plastic, so you should not press hard on them). Everything, the optics is disassembled. Now you should think about where to install the ignition unit. The main thing is to mount it so that later the whole structure does not rest against the metal bumper bumper. And the mounting parts are usually sold with xenon lamps, so you don’t need to make anything yourself.

how to install xenon on a VAZ 2110
how to install xenon on a VAZ 2110

Now the wires. Inside the cover there are 4 data elements that are connected to the power supply of the battery. Remember that the white wires are always positive and the brown wires are always negative. And before installing xenon, carefully study the polarity of all elements. Sometimes manufacturers of alternative optics paint wires in completely different colors. For example, on xenon lenses, "plus" may be indicated in black, and "minus" in blue. In order not to confuse the values \u200b\u200band not connect a negative charge to a positive charge, carefullyread the instructions that come with each new part. According to her, connect the wires to the desired connections and fix the xenon lamp in place. The lid should be closed so that the connected elements are not pinched together. The terminals are connected to the ignition unit. With the second headlight, the same actions should be performed. At this stage, the question of how to install xenon on the VAZ-2110 can be considered resolved.

xenon for VAZ 2110
xenon for VAZ 2110

Helpful tips

When installing xenon, always test the headlight before it is fully installed on the car. So in case of malfunctions, it will take you less time to reverse the dismantling of the entire structure. And one more thing - observe the correct mounts of the case. If it does not fall into the installation slots, then you overlooked something or forgot to do it during installation.

Recommended: