How to remove the console on the "Prior" without much effort?

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Question: "How to remove the console on the "Prior"?" quite popular among the owners of this car. And it is popular because it is done with enviable constancy. The reason for everything is the controls, or rather, their location. For example, it is impossible to easily replace any part of the control or the same clock without removing the console.

In principle, removing the front console on the Priore is not so difficult. All you need is a small set of tools, including a Phillips screwdriver.

Preparing to remove the console

Before you remove the console on the "Prior", you must remove the radio. There may be a difference between configurations. Namely: the difference in the cars "luxury" and "norm" in the size of the connector for the radio. As for everything else - there is no difference in the mounts. To remove the radio, special tools (keys) that come with it are suitable.

Having freed up a niche, you need to press on the connectors forbuttons, then take them out and disconnect the block with wires from them. It is better not to damage these wires, as they go to the console. Then the ashtray is removed. To do this, pull it towards you with a certain effort. As soon as the ashtray is removed, the fastening screws will be visible: there are two of them and both must be unscrewed. Only now we are starting to answer the question: “How to remove the center console on the Priore?”

Removing the console

The top of the console contains several mounting screws that need to be removed. Two of them are at the top of the console. These screws are used to install the audio system. If the machine was purchased from the factory, then these screws are located under the cover itself.

As soon as the screws are removed, you can slowly remove the console. To do this, you need to carefully take it aside and thread all the wires that went to the buttons and were previously disconnected.

After that, you need to disconnect a few more connectors, one of which is the connector for the heater control unit, and the second is the connector for the regular quartz clock.

And finally, the last detachable connector belongs to the button for turning on an additional alarm in case of an accident. It is better to detach it when the button is already extracted from the console.

After the performed operations, you can remove the console completely without any problems. So to the question: “How to remove the console on the Priore?” the answer is quite simple.

It is worth adding that ifit is necessary to replace the console, then when removing it, it will be necessary to unscrew the heater control unit and the clock from the inside along with the central air duct nozzles.

Installing the console

It is absolutely logical that all actions are exactly the same as when removing the console on the Prior, only they must be performed in reverse order. At the same time, you should carefully monitor that all the details are in place.

Purchasing a console

In this case, the owner of Priora may face a problem. The console is not so easy to find in stores, but if luck smiles, then buying a console will not be so expensive - about 700 rubles. Sometimes the console can also be found at a car dealership and can be purchased a little cheaper than in a store, while the quality of the panel can be even better.