2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Interior decoration is truly amazing: people are moving away from the traditional methods of manufacturers, buying budget cars, preferring to decorate them with presentable models of luxury foreign cars. Leather interior in any era was considered the peak of prestige, a sign of the noble class, high status and we alth. How can you leather an inexpensive car or replace an old coating that has fallen into disrepair?
A little about the advantages of skin tightening
On the first "date" with a brand new car, the buyer glances at the upholstery, and if the interior is upholstered in leather, at a reasonable price, he instantly makes a choice in favor of this "steel horse". The use of durable material not only increases the quality and prestige of the brand, but also makes movement comfortable. The leather seats are comfortable to sit on. Why did the manufacturer decide to offer this style to customers?
- Leather is much more durable than textiles and easier to clean. Compared to leather upholstery, textilefinishing is cheaper, but over time it rarely needs to be replaced, except for cuts, scratches. It does not lose its original properties for almost the entire period of operation of the car with careful attitude and care.
- Inadvertently falling ashes from a cigarette or spilled coffee for lining does not matter.
- The material does not cause difficulties in cleaning, it is much easier to put it in order than fabric.
- Leather material, whether substitute or natural, does not absorb odors.
We have to warn about the shortcomings. Reasons to ditch the leather trim:
Sometimes don't get carried away with the idea of leather upholstery unless the driver has a Jaguar or a Bentley. Almost everything depends on the quality of the materials. When referring to cheap leatherette, even at first glance it seems expensive, you can be sure that after a couple of months of intensive use, there will be no trace of its former attractiveness. Another thing is leather upholstery for branded vehicles, it has been serving for decades.
Don't get carried away with constriction, provided that the kids will often have to drive in the car. This design option for interior decoration is not suitable for drivers who often carry pets. Not everyone appreciates expensive finishes. Careful maintenance is inevitable, so if a car enthusiast is willing to spend money on professional cleaning of chairs, you can use this finish. On chairs without lateral support, there is a high risk that the seat will be slippery. You'll just have to get used to this. In regions with a hot climate, leather upholstery will make people prettysweat literally. When using cheap leather, leatherette from handicraft artisans, the smell will be almost unbearable. A reasonable question arises: what skin to choose?
Tricks of choosing materials
In theory, a motorist can expect upholstery from exotic animals, in practice, leather upholstery is almost always made from the skins of cattle, and with the characteristics of meat productivity. These are cows, bulls with an impressive body weight. Pig and sheep skins are not used in this case, according to auto experts. The larger the animal, the higher the cost of finishing. What skin types can be distinguished?
Aniline leather and its features
Aniline car upholstery products are processed with dyes, resulting in products that can absorb moisture well. Minus - poor light fastness, abrasion. Absorbed areas with coffee, tea or water spills are difficult to cover up.
Pigmented leather upholstery
A common version of car upholstery is pigmented leather with partial preservation of the natural pattern. This gives increased resistance to wear, to repeated bending. How is the work done?
Step-by-step coaching on seat upholstery
For do-it-yourself leather upholstery, you will needclear calculation and the following scheme. You can't do all the work in one day.
Seat upholstery begins with measurements of the height, width of the backs, head restraint. Patterns are made on paper according to size. The resulting products must be put on chairs and circled with chalk with a margin of 3 cm. The details are cut out according to the patterns with scissors. Before sewing with a machine, it is better to sew by hand. To add softness, you can sew additional covers made of mattress fabric and cover the seats with them. Then you need to attach both options and, if they match, proceed to the line on the typewriter. It will be much more convenient to work with the seat removed.
Secrets of the ceiling upholstery
It is easy to process despite the rather big area:
- All elements are dismantled in the order of actions described in the instructions for the vehicle.
- Old glue with a hard sponge or rag must be removed.
- Sanding is a must for better adhesive and surface adhesion.
- You need to start pasting from the center of the ceiling, pressing the new coating and smoothing it with a rubber spatula.
- Glue is applied to the remaining areas after 15 cm. It is important to stretch the material and smooth it well to avoid wrinkling.
- After pasting it is better to use a hair dryer. The edges are wrapped on the reverse side and glued.
Highlights when reupholstering doors
Patterns are cut as follows. This tactic in do-it-yourself interior trim can beuse on all surfaces. Masking tape is taken, and its overlapping strips are glued to the door, the windows should be marked with a felt-tip pen, these places should be cut out. Next, the skin is cut out along the patterns. The work is carried out in stages:
- sanding, degreasing plastic parts;
- pasting starts from the glass: the material is glued along the line along the border of the glass;
- you need to direct a hot air stream onto the skin, gradually pulling it over the entire surface of the door;
- work should use a rubber spatula.
Transmission switch external upgrade
The process will not take long, of all the manipulations, this is the easiest job. The handle is wrapped in cling film. On top of this device, it is necessary to apply masking tape in several layers. The marker should mark the areas of future seams. Next, the adhesive tape is cut with a clerical knife and patterns are cut out again, according to which it is easy to make a leather update. There will be two parts in the standard production of the handle, they are sewn and glued.
Valuable tips from the pros
There is no shortage in the selection of sewing machines. The main thing in this matter is to choose the right foot and needle in order to flash multilayer materials. Before repairing the upholstery, it is important to rinse and clean the interior from dust, sand, degrease the surfaces, use high-quality glue.
You can't rush: you need to let the glue dry, it is not forbidden to use a hair dryer. Due to the large bends, recesses, the glue sometimes does not adhere well. Exit -apply putty, sand it after it dries. An alternative to it can be polyester resin.
When treacherous folds appear, you have to peel them off and carry out manipulations again, cleaning the coating from the previous layer of adhesive. Do not be afraid of leather substitutes, according to reviews, they do a good job of giving an aesthetic, beautiful image to the salon.
Reliability, the choice of competent means are characterized by specialized salons that provide services for "facing". For leather upholstery of the car interior, you yourself will need some experience or a clear understanding of the procedure system. Using genuine leather, it is better not to save on small details when using dermantin. Over time, he will give himself away, and again you will have to spend money. Glue is selected according to the type of leather raw materials. The usual adhesive composition dries in 20 hours. To give the desired shape, it is better to soak the raw materials in warm water, not in boiling water. This is done within three hours.
When contacting professional workshops, you can ask to see the workshop in which the renovation takes place and ask about the types of leather used by workers. Too low price for finishing from natural raw materials should alert. Each car owner and specialist has their own secrets, so you should first study the material thoroughly, then proceed with the update.
Recommended:
How to check the temperature sensor: description, step-by-step instructions and recommendations
The operation of the motor and other vehicle systems is controlled by certain sensors. They are located in different parts of the system. How to check the temperature sensor of the coolant, air and other control devices will be discussed in the article
How to park backwards - step by step instructions and recommendations
The ability to park backwards is especially relevant at the present time. It can be difficult for residents of large cities to find a free parking space, so even uncomfortable gaps between cars are used. In this situation, it is important to know how to proceed in order to park and avoid hitting nearby cars. You can find more information on how to park backwards in a car, tips for beginners and other useful information in this article
How to change the coolant: step by step instructions, features and recommendations
Coolant is one of the components of the smooth and proper operation of engine components. Sooner or later, it becomes necessary to replace the coolant in the car. Every car owner should know how to change the coolant, because there are not always funds for service stations
What to fill in the battery: step by step instructions, features and recommendations
The battery is one of the most important elements in any car. It is he who supplies the starting current to the starter, which subsequently turns the crankshaft and starts the engine
How to check the catalyst for clogging: step by step instructions, device and recommendations
Ecological standards are getting tougher in the world every year. At the moment, in the countries of the European Union, cars with exhaust emissions not lower than Euro-4 are used. In Russia, less demanding on the environmental friendliness of exhaust gases