2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42
Modern domestic car KAMAZ-43253 is relatively light. On its basis, flatbed tractors are produced, which are popular and have proven themselves well. In this regard, the KAMAZ-43253 chassis continues to roll off the assembly line. They are able to upgrade and perform a wide range of necessary work.
These unpretentious KAMAZ trucks are preferable to higher-class trucks with greater payload. This situation is explained by the fact that the model 43253 has a fairly low fuel consumption, and, no less important, the axle load is reduced, which reduces operating costs, and the car is quickly bought due to its economy.
KAMAZ-43253 is intended for installation on it of construction hoists, feed loaders, concrete mixers, dump bodies, truck cranes, etc. The mass of each of these superstructures should not be more than 8850 kg.
A new KAMAZ-43253 is produced with an engine 740.31-240,which has a rated power of 240 hp. With. This power is more than enough to carry superstructures with ease. In this case, the total mass of the car can reach up to 15.2 tons. And this is very little. However, such a small figure makes it possible for the chassis to maintain maneuverability, in addition, to reach speeds of more than 90 km / h on a flat road. In this case, the outer turning radius is less than 10 m. In turn, the permissible cornering angle is not more than 25 degrees.
Weight loads and parameters
Curb weight - 6200 kg.
Curb weight with front axle load - 3900 kg.
Full weight with front axle load - 6000 kg.
Curb weight with rear axle load - 2300 kg.
Gross weight with rear axle load - 9200 kg.
Mass, permissible superstructure with load - 8850 kg.
Full weight with superstructure - 15200 kg.
KAMAZ-43253 is equipped with an imported Cummins diesel engine, the power of which is 210 hp. With. The wheel formula is 4x2, and the type of suspension is spring. Equipped with a chassis car and a ten-speed manual gearbox. In addition, on request, you can purchase a restyled version, which has a ZF6 gearbox. The power supply system is equipped with a tank of 250 liters. However, if the need arises, the standard tank can be changed to a larger one, for example, up to 500 liters. In the KAMAZ-43253 chassis, the clutch is fractional, dry type, double-disk. There is also a hydraulicclutch drive and pneumatic booster.
This chassis car is very original in every way. Due to its small size, it is often used as a special equipment in the city. Modernization of model 43253 does not require much effort, so the Kama plant, depending on the needs, makes many modifications. KAMAZ-43253 can become indispensable for small needs, as well as for the transportation of medium-heavy cargo.
KAMAZ-43253 occupies a leading position in the market, in the mid-price segment. He perfectly showed his potential in various sectors of the modern economy. For those wishing to purchase KAMAZ-43253, the price will be quite affordable. Given this, as well as the versatility and high level of technical parameters, this car will be a profitable investment for industrial and agricultural enterprises.
Recommended:
Design, chassis and engine "Chevrolet Niva"
New suspension, gearbox, steering, brakes, interior, body design and, of course, a modern Niva-Chevrolet engine - GM knows how to surprise its Russian consumers. This happened for the first time at the beginning of the 2000s and is expected again in 2016, after the start of the expected mass production of Chevy-2
KAMAZ 5460 - the flagship of modern KamAZ trucks
KAMAZ 5460 is a new trend in the Russian truck industry. Given the development of modern technology, he claims to become a new legend. Let's take a closer look
Car chassis - what is it?
The article talks about the chassis of the car. Its main functions and constituent elements are described in detail. It is also mentioned what other elements the term "chassis" is used to describe
Technical characteristics of KAMAZ-43253 provide the truck with wide application
Medium-duty trucks of the KAMAZ-43253 family are high-quality trucks for transporting all kinds of goods within the city and for the production of various special-purpose vehicles
Self-propelled chassis VTZ-30SSh. Tractor T-16. Domestic self-propelled chassis
Since the mid-60s, the Kharkov Plant of Tractor Self-Propelled Chassis (KhZTSSH) has been producing self-propelled chassis T 16. In total, more than 600 thousand copies of the machine were produced. For the characteristic appearance of the chassis, it had common nicknames in the USSR "Drapunets" or "Beggar"
