AWS Additive: pros and cons reviews

2024 Author: Erin Ralphs | [email protected]. Last modified: 2024-02-19 11:42

Every driver seeks to extend the life of the engine of his vehicle. This will delay the cost of a major overhaul or complete replacement of the engine. Various means are used for this. In addition to high-quality engine and transmission oil, special components are added to the system. They extend the life of a mechanism with high mileage.

The AWS additive belongs to the category of such products. Feedback from professional technologists and car owners will help you understand the features of operation and application of the presented tool.

Manufacturer

The AWS additive has been available to the general public since 2005. The manufacturer of this tool is the domestic company ZAO Nanotrans. For industrial production, she introduced additives of the NT-10 series. In the course of scientific development, a composition was created that could be sold at retail. This product is called AWS. This name stands for Anti Wear System.

The presented product was created on the basis of NT-20 gels,"NT-10". The composition was studied in laboratory conditions. Technologists studied its mechanism of action, the results of processing various surfaces.

The presented scientific development has been used in industrial workshops of light and heavy industry for more than 10 years. Additives increase the performance of machinery. This proves the high performance of the AWS product. Today, the presented additives are sold quite actively in China, Europe, and also in our country.

Product features

AWS additive is a solid-phase component that is widely used as an additive to the regular oil of various vehicle systems. The additive improves the sliding of rubbing pairs, reduces the likelihood of wear of their surfaces under the influence of various adverse factors and processes.

Professional technologists say AWS components prevent the root cause of part failure. They do not allow the development of electrochemical corrosion, hydrogen embrittlement, as well as other types of mechanical damage, scuffing and scratches of rubbing pairs.

The additive is used as a prevention and elimination of traces of existing damage to parts. Thanks to a special formula, the composition of the additive allows you to create a new layer of material (patch) at the site of scuffing, gouges and scratches. The material builds up until the original surface geometry is restored.

Operation principle

Expert reviews of AWS engine additive speak for a speci althe mechanism of action of the presented means. It contains certain mineral components that, during the operation of the motor, have a building effect at the micro level.

Under the influence of friction, the particles of the additive hit the relief protrusions of the metal surfaces of the engine. As a result, the destruction of the granules of the agent occurs. This process is accompanied by high temperatures. As a result, nanoparticles form new surfaces with unique strength characteristics. This procedure can be compared to metallurgical production, which is organized at the micro level.

When the ribbed space is filled with destroyed additive granules, the process stops. The destruction no longer occurs, as there is no longer a non-uniform terrain on the surface. The patches formed during this action are highly durable. They significantly extend the life of the motor.

When should additives be used?

Reviews of experts on the AWS additive testify to the high efficiency of the product. It must be applied in several cases. First of all, additives are used in the engine when scoring in the cylinders is detected during maintenance. The tool isolates, neutralizes them. Also, if there is sagging compression, the presented tool will be able to even out its level.

With a total system wear of up to 70%, AWS will be able to restore it to almost its original level. layer thickness,which forms on surfaces is about 15 microns. With repeated surface treatment, a greater layer thickness can be achieved. But this work should be entrusted to professionals.

When coking, the rings may lie. The composition of the additive allows you to get rid of CPG sludge. In this case, the presented node is not subjected to drying. The oil retains its normal consistency. The rings again fit snugly against the walls of the cylinder. It also protects the system from further wear.

For which systems is the product intended

Special additive formulations are used for each type of system. The technology developed by ZAO Nanotrans is widely used in industry. For automotive technology, the AWS additive, the pros and cons of which should be known before use, was developed using a special technology. At the same time, the features of the operation of various units and mechanisms of machines were studied.

The presented funds can be used to service bridges, handouts, gearboxes. AWS tools are most widely used in the maintenance of vehicle engines. For mechanical and automatic transmission, the presented tool is also used.

Additives with certain performance properties have been developed for various types of machines and mechanisms. They are used in special equipment, as well as trucks, commercial vehicles. Special products have been developed for light vehicles. Therefore, the choice of additives must be approachedresponsibly.

Cost

Several popular formulations are on sale, which the domestic manufacturer has developed for various car systems. They are available in retail. You can buy maintenance repair compounds in specialized stores, as well as directly from the manufacturer.

AWS additive for a 10 g engine costs about 1300-1400 rubles. This kit is purchased in addition to the set with two dispensers. In some cases, pouring 4 tubes into the system is a lot, and 2 is not enough. In this case, purchase a set with one dispenser.

A standard set of additives for internal combustion engines costs 2700-3000 rubles. It includes two dispensers of 10 ml. This is the standard size that is used for various passenger car engines.

For mechanical transmission, axles, gearboxes and other systems, a set of additives is on sale. It includes 2 dispensers with a capacity of 10 ml. The cost of the kit is 1600-1800 rubles. For automatic transmission, you can purchase a similar set at a price of 3700-6000 rubles.

Use of additives

The use of additives requires careful adherence to the manufacturer's recommendations. In this case, it is possible to create an impact-resistant layer that exceeds metal in hardness. Instructions for using the product can be seen on the example of treating a G4KD engine with an AWS additive.

The process is carried out in two stages. The interval between them is 250 km. The product is added to fresh oil. Before his replacementthere should be at least 3 thousand km of run. It is also necessary to adhere to the prescribed dosage. If the engine runs on gasoline, additives are added to the oil in the amount of 2 ml per 1 liter of regular lubricant. For diesel engines, the dosage is increased to 4 ml of additives per 1 liter of material serving the system.

When refueling the presented engine, 3 ml of additives remained. To use them up, after the standard two-stage treatment, add the remainder of the product to the oil for the third time. This is done after the second refueling of lubricant after 300 km of run. The effect persists for 100,000 kilometers.

Processing effect

Considering the real reviews of the AWS additive, which are given by experts and owners of various vehicles, the high performance of the tool should be noted. After adding it to the engine model presented above, an improvement in many engine performance characteristics was observed. Reduced fuel consumption.

During the study of the engine, it was found that the friction of metal surfaces was reduced by 30-70%. All elements of the system are reliably protected from wear and friction. The high anti-friction action of the presented agent is noted.

The maintenance interval has doubled. The engine started easily in cold weather. At the same time, damaged metal surfaces became smoother. The engine began to work more powerfully, the compression rate increased. The oil has almost stopped burning out. The listed qualities of the internal combustion engineallow us to draw conclusions about the high efficiency of the presented tool.

Benefits

AWS additive has a lot of advantages over competing compounds. Feedback from professional technologists made it possible to highlight the main positive qualities of the presented product.

After applying additives of a domestic manufacturer, it is not required to change the oil. It is operated in the system in accordance with the manufacturer's regulations. Processing of the system takes place in just 2 stages. For example, Forsan and Suprotec require oil additives to be added in 3 stages.

Interval between treatment periods with AWS additives is relatively short. For comparison, competitors have it from 1000 km or more. When using AWS additives, the procedure period is significantly reduced. The first results from the use of this agent can be observed already in the first hour after adding the agent to regular oil. Additives do not affect the properties of the oil.

Process Description

AWS - an additive that is added to the oil according to a certain scheme. The engine must be warmed up. You need to wear gloves on your hands (available in the package), and a silicone extension cord on the dispenser. The procedure is carried out with the engine running.

Before the procedure, it is necessary to prepare the required amount of the product (the dosage was given above). Through the hole for measuring the oil level, it is necessary to pour the calculated amount of additives. After that, the engine should run at idle for 15 minutes. It is then stopped for 5 minutes.

Afterbreak, the motor must be started again for 15 minutes and stopped for 5 minutes. This procedure is carried out in the interval of run of 250 km. This technology must be strictly followed. Otherwise, the performance of the additive will be low.

Negative reviews

Domestic drivers have been actively using AWS additives for several years. Negative reviews are less common than positive ones. Among the negative opinions, one can find complaints about the lack of effectiveness of the product. To prevent this from happening, it is necessary to use additives in accordance with the manufacturer's instructions.

The engine must not be heavily loaded (power up to 50%) in the first 1000 km after filling the product. If the system is worn out by more than 70%, the presented remedy will also be ineffective. If the CPG is worn out in the engine, the oil scraper rings are broken, the presented product is also not recommended.

It is forbidden to use the composition in combination with oils that contain molybdenum, graphite, talc in their composition.

Positive Feedback

Positive reviews of AWS additives are more common than negative ones. Users claim that when using this tool, fuel consumption has decreased, engine power has increased. Engine life and service intervals have also been extended. Reduced noise and vibration. In cold weather, starting the engine is easy.

Having considered the features of AWS additives and user reviews about the presented tool, we can say about its high efficiency. The presented components, when used correctly, have a positive effect on the operation of the engine.